How to Convert CCTV IP Cameras Ethernet Cable to DVR Coax Port?

[katopz24]

Hi Mga Bossing,

Need your help.. Paano mo ma-i-coconvert ang IP Cameras ethernet cable to DVR (Coax port)?

Ganito kasi yun mga Bossing, may nagset up sa stores namin using IP Cameras ethernet cable connected to switch and the NVR (China) connected to switch as well. Ngayon, we will change the NVR to HIKVision DVR due to no apps for mobile and unable to setup for external view. (Complicated ang China brand). For very user friendly configuration and cheap than the NVR (HIKVision) we bought a HIKVision DVR.

Thank you in advance Bossing! Cheers!

 

[jay_soriano56]

just buy Hikvision NVR instead of DVR.

DVR ng Hikvision (HQH, HUH series) supported ang IP Camera on top of Coaxial BNC TurboHD Analog connections.

take out your camera and test it sa store for compatibility.

 

[katopz24]

just buy Hikvision NVR instead of DVR.

DVR ng Hikvision (HQH, HUH series) supported ang IP Camera on top of Coaxial BNC TurboHD Analog connections.

take out your camera and test it sa store for compatibility.

Boss, already bought the HIKVision DVR. Also, if you convert the IP Cameras to coax no need to obtain IPs of the cameras. So you can just setup static IP only the DVR.

Anyway, thank you pa din Boss. Cheers!

 

[jay_soriano56]

i-coconvert ang IP Cameras ethernet cable to DVR (Coax port)?

need a Video Decoder for EACH IP camera para lang maisaksak sa EACH and every port na nabiling DVR.

if you convert the IP Cameras to coax no need to obtain IPs of the cameras

hindi naman yan crimp and adaptor lang.

if you knew the cost ng video decoder "JUST TO CONVERT" each IP cameras to DVR's Coaxial port you will not consider this setup.

your options are:
1. sell all the cameras and change to turboHD cameras
2. sell the DVR and buy a compatible NVR for IP camera.

p.s.the NVR is already a video decoder with a recorder function, you know you messed up when you bought the DVR right?

https://www.aventurasecurity.com/1-Channel-IP-Video-Decoder/
https://www.aventurasecurity.com/4-Channel-IP-Video-Decoder/

http://www.alloy.com.ph/products/GXV3500/

 

[katopz24]

i-coconvert ang IP Cameras ethernet cable to DVR (Coax port)?

need a Video Decoder for EACH IP camera para lang maisaksak sa EACH and every port na nabiling DVR.


hindi naman yan crimp and adaptor lang.

if you knew the cost ng video decoder "JUST TO CONVERT" each IP cameras to DVR's Coaxial port you will not consider this setup.

your options are:
1. sell all the cameras and change to turboHD cameras
2. sell the DVR and buy a compatible NVR for IP camera.

p.s.the NVR is already a video decoder with a recorder function, you know you messed up when you bought the DVR right?

https://www.aventurasecurity.com/1-Channel-IP-Video-Decoder/
https://www.aventurasecurity.com/4-Channel-IP-Video-Decoder/

http://www.alloy.com.ph/products/GXV3500/

Iniisip ko lang kung may tulad neto na direkta kaagad. Hehehe, eto kasi kung ayaw mo gumamit ng coax, you can use cat5 instead of coax.

Pero kung need pa decoder, ilalagay ko nalang sa ibang store kasi we are planning to replace all china DVR into HikVision brand and also for accessing in 1 apps.

Meron kame 4 Stores installed with IP Cameras NVR China brand, palitan ko nalang ng NVR na Hikvision.

Pero hindi ko muna icoclose eto baka meron nga makapagsuggest DIY. LOL

 

[xantrich]

TS check mo ung camera usually ung IP camera pag binili mo may ready cable na yan na for coax, rj 45, rca for audio and video out.

 

[katopz24]

TS check mo ung camera usually ung IP camera pag binili mo may ready cable na yan na for coax, rj 45, rca for audio and video out.

Rj45 and Power lang Boss. Thanks sa reply.