- Messages
- 65
- Reaction score
- 0
- Points
- 26
Re: PLDTHOME Fiber ONU MODEM AN5506-04-FA | How to access the advanced sett
^
Video tutorial for your reference.
- - - UPDATE para sa AP Isolation - - -
According to mlesterdampios on github:
You cannot disable AP isolation in the web gui.
Use telnet instead to disable.
Step 1. go to http://192.168.1.1/fh
Step 2. log in with NEW 'fiberhomesuperadmin' on RP2631
Step 3. go to 'debug switch' on the left
Step 4. enable 'telnet switch' then click apply. Log out.
Step 5. open the command prompt and type in 'telnet 192.168.1.1'. Use 'gpon' as both the 'login' and password.
Step 6. type in 'enable'. press enter
Step 7. use 'gpon' as the password again.
Step 8. type in 'cd switch'. press enter
Step 9. type in 'control port_fw_eligiblity_switch disable'. press enter
Step 10. exit the command prompt AP isolation should now be disabled and your devices will now be able to see each other. This solution is temporary and will have to be done again when you restart your router. Contact PLDT and request it be disabled for it to be permanent.
Thank you.
- - - Updated - - -
New video tutorial courtesy of jivexyz on github.
^
Video tutorial for your reference.
- - - UPDATE para sa AP Isolation - - -
According to mlesterdampios on github:
You cannot disable AP isolation in the web gui.
Use telnet instead to disable.
Step 1. go to http://192.168.1.1/fh
Step 2. log in with NEW 'fiberhomesuperadmin' on RP2631
Step 3. go to 'debug switch' on the left
Step 4. enable 'telnet switch' then click apply. Log out.
Step 5. open the command prompt and type in 'telnet 192.168.1.1'. Use 'gpon' as both the 'login' and password.
Step 6. type in 'enable'. press enter
Step 7. use 'gpon' as the password again.
Step 8. type in 'cd switch'. press enter
Step 9. type in 'control port_fw_eligiblity_switch disable'. press enter
Step 10. exit the command prompt AP isolation should now be disabled and your devices will now be able to see each other. This solution is temporary and will have to be done again when you restart your router. Contact PLDT and request it be disabled for it to be permanent.
Thank you.
- - - Updated - - -
New video tutorial courtesy of jivexyz on github.
Last edited: