Hindi gumagana sakin yung procedure ni balong. Naka ilang try na ako ayaw parin.
Oo nga, di yata compatible firmware dun sa balong, sino kayang marunongnkumuha ng .htm dun s universal firmware, para yun ang maflash ni balong....
Symbianize Forum
Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.
All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!
power button na lang B315s-936 using POLKOMTEL FIRMWARE.
- Thread starter lex71
- Start date
- Replies 56
- Views 11,442
Oo nga, di yata compatible firmware dun sa balong, sino kayang marunongnkumuha ng .htm dun s universal firmware, para yun ang maflash ni balong....
may pag,asa pa yan mga bro. follow niyo ung procedure sa jumper tricks nila.
sino pala yung nagcomment sa taas na sya lang nakakaalam dito sb ?
follow this trick:
credit nalang kay sky summer aka jansen ramos.
http://www.symbianize.com/showthread.php?t=1370265
sino pala yung nagcomment sa taas na sya lang nakakaalam dito sb ?
follow this trick:
credit nalang kay sky summer aka jansen ramos.
http://www.symbianize.com/showthread.php?t=1370265
Last edited:
- Messages
- 474
- Reaction score
- 0
- Points
- 26
may pag,asa pa yan mga bro. follow niyo ung procedure sa jumper tricks nila.
sino pala yung nagcomment sa taas na sya lang nakakaalam dito sb ?
follow this trick:
credit nalang kay sky summer aka jansen ramos.
http://www.symbianize.com/showthread.php?t=1370265
natry ko na yan pero no luck sakin
up natin to, sana may makakatulong sa problemang ito
Pareho talaga tayo ng sinapit.
- Messages
- 220
- Reaction score
- 7
- Points
- 28
ganitong ganito ung unit ko my pag asa pa kaya?
napakalupit ng tadhana still no luck sa new method pero pansin ko nag babago yung com at wala sa list ng flasher kaya manual ko lang nilalagay- Messages
- 146
- Reaction score
- 0
- Points
- 26
After flash naging 169 ip at power na lang me ilaw sana me iba pa firmware sa balong
- Messages
- 146
- Reaction score
- 0
- Points
- 26
pashare naman boss kung panu mo nagawa
- Messages
- 4
- Reaction score
- 0
- Points
- 16
Lightbulb B315s-936 power light only solution
Tuts for B315s-936 power light only.
*Basahin lahat muna bago simulan.. may mga revisions.
working lang on following conditions:
1. Successful sa new openline ng 936 pero after ng reset e powerlight pa rin.
2. Unknown device sa Device manager - details - Hardware IDs - VID_12D1&PID_36DD.
Kung hindi mo naabot yung "Done/Remove battery and put it again" bka hindi gumana.
Steps:
Note: Reported po na mas successful pag gawin muna yung new 936 flashing by sir Jansen Ramos.
http://www.symbianize.com/showthread.php?t=1371603
Mostly lahat nang successful e ginamit Win7 64bit OS.
1. Hard reset, either :
a. press power button at reset button then plug power, pag umilaw yung red, wag bitawan hanggang hindi nawawala ynug red.
b. pag hindi umilaw yung red, press power at wps buttons, pag umilaw yung red, wag bitawan hanggang hindi nawawala yung red.
2. Hintayin umilaw blue light at last two signal bars. wag galawin.
3. Hintayin umilaw red light at first and last signal bars. wag galawin.
4. Hintayin na power light na lang. plug usb to usb cord.
5. Check sa device drivers dapat may unknown o Android ADB Interface ka.
6. Ipilit and driver na - Android ADB Interface, mag have disk ka. piliin mo yung nasa folder adb_driver_windows
7. Go to run then CMD. - Change ka sa directory kung saan mo inextract yung files - "CD c:\files"
Dapat yung cmd mo "c:\files>"
8. Sa CMD, type
Code:
fastboot -i0x12d1 getvar product
9. Dapat may magpakita na - product: balongv7r2
10. Sa CMD ulit, type
Code:
fastboot -i0x12d1 erase nvimg
11. Dapat may response na "OK".
12. Sa CMD ulit, type
Code:
fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".
14. Reboot na
b315s-936_for_powerlight_only.rar
Additional files http://www.mediafire.com/file/w75a9mn87m2pitp/tools.rar
Source: 4pda.ru
win 8.1/10 os patch:
http://www.mediafire.com/file/8etvc0...FIX_jansen.reg
credits to sir jansen ramos
Second trick to try,
Pero start with the needle trick,
(shorted debug pins, then plug power, plug usb, no powerlight but detected as 3G PC UI interface)
Instructions inside.
fix2b315.rar
*try at you're own risk sa second trick kasi lahat ng result e deadboot, pero you can always go back to power led only using new 936 flashing.
Source link kung gusto nyo magbasa.. google translate na lang
http://4pda.ru/forum/index.php?showtopic=700481&st=680
Middle East firmware credits to Sir rexzero
http://www.symbianize.com/showthread...1#post22514169
Zain Firmware credits kay Sir mulot
https://www.mediafire.com/?371hp9w4j9veb3f
Quote Originally Posted by xkiller22 View Post
gamit ka windows 7 64 bit boss.
install lahat drivers tapos restart pc muna.
tapos sundan mo ung steps ni sir l2aizen :
1.ung method ni jansen Ramos
pero ang ifflash ay ung files na ay ung nasa inilink ni sir rexzero
https://www.mediafire.com/?78ytzt91jtclu6n
pag natapos mona iflash (done remove baterry blahblah)remove power,usb
rekta kana sa tut ni sir gltimbreza
2.ung method ni sir gltimbreza
Dagdag tips ko lng to .
(wag mo muna buksan cmd pag katapos mo sundan step 1-6.
katapos sa step 6 try mo run as admin ang cmd pag ayaw parin try mo normal na cmd. tapos sa step 7 kana. ganito lng ginawa ko tapos nag ok nako sa step 10.)
Quote Originally Posted by cidra View Post
Mga bos pag nagflash kau ng middle east fw kahit di nyo na sundan yung 1-4 ni ts, direstso na agad kau sa step 5 then cmd na.
Quote Originally Posted by Pedik View Post
sa mga bagong mag try,
try nyo muna wag mag "fastboot -i0x12d1 erase nvimg"
bali ganito lang muna gawin nyo
1.fastboot -i0x12d1 getvar product
2.fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
3.fastboot reboot
pumapasok naman kasi kahit wala yun "fastboot -i0x12d1 erase nvimg" baka kasi dito ang dahilan bakit di na tayo makapag flash ng ibang firmware dahil erase na yun nvimg natin,
sa orig instruction kasi, last option na yun "fastboot -i0x12d1 erase nvimg" kung same pa rin ang status after mag "fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin"
stuck sa polko yun nagawa ko kagabi
Tuts for B315s-936 power light only.
*Basahin lahat muna bago simulan.. may mga revisions.
working lang on following conditions:
1. Successful sa new openline ng 936 pero after ng reset e powerlight pa rin.
2. Unknown device sa Device manager - details - Hardware IDs - VID_12D1&PID_36DD.
Kung hindi mo naabot yung "Done/Remove battery and put it again" bka hindi gumana.
Steps:
Note: Reported po na mas successful pag gawin muna yung new 936 flashing by sir Jansen Ramos.
http://www.symbianize.com/showthread.php?t=1371603
Mostly lahat nang successful e ginamit Win7 64bit OS.
1. Hard reset, either :
a. press power button at reset button then plug power, pag umilaw yung red, wag bitawan hanggang hindi nawawala ynug red.
b. pag hindi umilaw yung red, press power at wps buttons, pag umilaw yung red, wag bitawan hanggang hindi nawawala yung red.
2. Hintayin umilaw blue light at last two signal bars. wag galawin.
3. Hintayin umilaw red light at first and last signal bars. wag galawin.
4. Hintayin na power light na lang. plug usb to usb cord.
5. Check sa device drivers dapat may unknown o Android ADB Interface ka.
6. Ipilit and driver na - Android ADB Interface, mag have disk ka. piliin mo yung nasa folder adb_driver_windows
7. Go to run then CMD. - Change ka sa directory kung saan mo inextract yung files - "CD c:\files"
Dapat yung cmd mo "c:\files>"
8. Sa CMD, type
Code:
fastboot -i0x12d1 getvar product
9. Dapat may magpakita na - product: balongv7r2
10. Sa CMD ulit, type
Code:
fastboot -i0x12d1 erase nvimg
11. Dapat may response na "OK".
12. Sa CMD ulit, type
Code:
fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".
14. Reboot na
b315s-936_for_powerlight_only.rar
Additional files http://www.mediafire.com/file/w75a9mn87m2pitp/tools.rar
Source: 4pda.ru
win 8.1/10 os patch:
http://www.mediafire.com/file/8etvc0...FIX_jansen.reg
credits to sir jansen ramos
Second trick to try,
Pero start with the needle trick,
(shorted debug pins, then plug power, plug usb, no powerlight but detected as 3G PC UI interface)
Instructions inside.
fix2b315.rar
*try at you're own risk sa second trick kasi lahat ng result e deadboot, pero you can always go back to power led only using new 936 flashing.
Source link kung gusto nyo magbasa.. google translate na lang
http://4pda.ru/forum/index.php?showtopic=700481&st=680
Middle East firmware credits to Sir rexzero
http://www.symbianize.com/showthread...1#post22514169
Zain Firmware credits kay Sir mulot
https://www.mediafire.com/?371hp9w4j9veb3f
Quote Originally Posted by xkiller22 View Post
gamit ka windows 7 64 bit boss.
install lahat drivers tapos restart pc muna.
tapos sundan mo ung steps ni sir l2aizen :
1.ung method ni jansen Ramos
pero ang ifflash ay ung files na ay ung nasa inilink ni sir rexzero
https://www.mediafire.com/?78ytzt91jtclu6n
pag natapos mona iflash (done remove baterry blahblah)remove power,usb
rekta kana sa tut ni sir gltimbreza
2.ung method ni sir gltimbreza
Dagdag tips ko lng to .
(wag mo muna buksan cmd pag katapos mo sundan step 1-6.
katapos sa step 6 try mo run as admin ang cmd pag ayaw parin try mo normal na cmd. tapos sa step 7 kana. ganito lng ginawa ko tapos nag ok nako sa step 10.)
Quote Originally Posted by cidra View Post
Mga bos pag nagflash kau ng middle east fw kahit di nyo na sundan yung 1-4 ni ts, direstso na agad kau sa step 5 then cmd na.
Quote Originally Posted by Pedik View Post
sa mga bagong mag try,
try nyo muna wag mag "fastboot -i0x12d1 erase nvimg"
bali ganito lang muna gawin nyo
1.fastboot -i0x12d1 getvar product
2.fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
3.fastboot reboot
pumapasok naman kasi kahit wala yun "fastboot -i0x12d1 erase nvimg" baka kasi dito ang dahilan bakit di na tayo makapag flash ng ibang firmware dahil erase na yun nvimg natin,
sa orig instruction kasi, last option na yun "fastboot -i0x12d1 erase nvimg" kung same pa rin ang status after mag "fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin"
stuck sa polko yun nagawa ko kagabi
I have resetted my 936 with Polkomtel Firmware.
Nag blink blink blink po siya mga paps. pero hindi ko po hinugot yung power adaptor.
tumigil po ang pag bli blink at naiwan nalang ang ilaw sa power indicator ng modem...
nakita ko po na umilaw yung lahat ng led pagkayari mai reset
Ngayon po i chineck ko po WEB Gui ko naka Polkomtel parin po siya...View attachment 310415
Sa tingin ko po nasira ang Firmware ng Modem niyo mga paps dahil habang nag rereset po yung modem, pinatay niyo po yung modem kaya ganyan po yung naging resulta....(kum baga po na interupt po yung pag rereset)
Payo ko po sa mga nag rereset gamit ang reset button sa likod ng modem niyo... Huwag po kayong magpanic hayaan lang na mag blink ang modem hanggang sa matapos ito.. hanggang sa mag initialize po ito saka niyo po i check uli yung web gui pagkatapos ma i reset...
Sana Po makatulong po Ito sa iba nating Nagpipitaganang Symbianizers..
Eto po ang mga sample ng WEB GUI ko..
View attachment 310416View attachment 310417View attachment 310418View attachment 310419
Nag blink blink blink po siya mga paps. pero hindi ko po hinugot yung power adaptor.
tumigil po ang pag bli blink at naiwan nalang ang ilaw sa power indicator ng modem...
nakita ko po na umilaw yung lahat ng led pagkayari mai reset
Ngayon po i chineck ko po WEB Gui ko naka Polkomtel parin po siya...View attachment 310415
Sa tingin ko po nasira ang Firmware ng Modem niyo mga paps dahil habang nag rereset po yung modem, pinatay niyo po yung modem kaya ganyan po yung naging resulta....(kum baga po na interupt po yung pag rereset)
Payo ko po sa mga nag rereset gamit ang reset button sa likod ng modem niyo... Huwag po kayong magpanic hayaan lang na mag blink ang modem hanggang sa matapos ito.. hanggang sa mag initialize po ito saka niyo po i check uli yung web gui pagkatapos ma i reset...
Sana Po makatulong po Ito sa iba nating Nagpipitaganang Symbianizers..
Eto po ang mga sample ng WEB GUI ko..
View attachment 310416View attachment 310417View attachment 310418View attachment 310419
