PROTECTING BM622i VIA CONFIG EDIT

[khaye1989]

hehehe ayos po ito...

 

[pakitxdiaz]

sir pwede ba to sa 22i 2011?

 

[ainarfulas888]

yup..ganun talaga dapat gawin..magsave na kau ng edited na config para everytime na mag change mac kau..upload nyo nalang agad yun edited config nyo

Salamat po sa thread na ito.....may tanong po ako sa parteng ito. Gagana po kaya ito? Kasi po kung mag edit ka ng isang configuration tapos gagamitin mo ulit, Sa pinaka baba po kasi ng configuration eh andun yung Identity,SharedSecret at Realm na nakalagay sa una mong edit? di po kaya magka conplict? O kailangan din pong baguhin yun ? Salamat po...

 

[ghabz55]

Some basic infos:

ang cpe nyo ay puppet as long as it follows tr-069 technical specification (CWMP) and configuration it set to communicate with ACS.

ACS = auto configuration server

bakit mahirap mag perma patch sa 22i? kase pag nag restore default ka, na eerase ang settings mo so kelangan mo pa talaga dissassemble ang whole flash (pag may oras pwede gawin)

kaya pag may nagsabing patched ang unit nila, wag mag restoredef at mawawala yan.

*WAG MAGPAPANIWALA SA TSISMIS! * minsan ginagamit para kumita.

How to:

calculate admin via macaddress
login as admin
download you config file

for version 2010 sample only

if you want to disable telnet, set value to "0"
line 6: <X_ServiceManage FtpEnable="1" FtpUserName="ftp" FtpPassword="ftp" FtpPort="21" FtpPath="/mnt" TelnetEnable="1" TelnetPort="23" SambaEnable="0"/>

para iwas remote upload ni globo edit at palitan ng any value, pwede ilagay mo, "guapo si dbug"
line 8: <ManagementServer URL="http://10.4.1.158:7547" Username="hgw" Password="hgw" PeriodicInformEnable="0" PeriodicInformInterval="7200" ConnectionRequestUsername="acs" ConnectionRequestPassword="acs" X_SSLCertEnable="0" ManageableDeviceNotificationLimit="0" UDPConnectionRequestAddressNotificationLimit="0" STUNEnable="0" STUNServerAddress="" STUNServerPort="3478" STUNUsername="handy" STUNPassword="handy" STUNMaximumKeepAlivePeriod="90" STUNMinimumKeepAlivePeriod="30">


para hindi mapasok ang admin, di pwede palitan ang password kaya ang username ang palitan mo
line 14: <UserInfoInstance InstanceID="1" Username="admin" Userpassword="2008tGuapodBug"/>


pwede mo rin palitan telnet username at password line 20 & 21.

e-save at muling e-upload sa ang config.
mag reboot.

WAG MAG RESTORE DEFAULTS AT BALIK SA DATI.

KUNG MAG CHANGE MAC, ULITIN LAMANG ANG PROCEDURE SA SA TAAS!


wag maging mayabang at epal... dito mo di lang kinuha yan.

happy hackin'.

EDIT:
reported "admin" edit is not working, will look into it later. salamat!

SALAMAT TS..

 

[wasen_32]

sir bakit po kaya yung bm622i (2010) ko po hindi siya nagcoconect kapag pinalitan ko po yun sa line na ito

ManagementServer URL="http://10.4.1.158:7547" Username="hgw" Password="hgw"

sinubukan ko na din po yung ibang mac ganun din po

bukod sa admin, ung red lang baguhin mo brod. salamat sa tulong boss
DBUG

 

[Peque AKho]

Some basic infos:

ang cpe nyo ay puppet as long as it follows tr-069 technical specification (CWMP) and configuration it set to communicate with ACS.

ACS = auto configuration server

bakit mahirap mag perma patch sa 22i? kase pag nag restore default ka, na eerase ang settings mo so kelangan mo pa talaga dissassemble ang whole flash (pag may oras pwede gawin)

kaya pag may nagsabing patched ang unit nila, wag mag restoredef at mawawala yan.

*WAG MAGPAPANIWALA SA TSISMIS! * minsan ginagamit para kumita.

How to:

calculate admin via macaddress
login as admin
download you config file

for version 2010 sample only

if you want to disable telnet, set value to "0"
line 6: <X_ServiceManage FtpEnable="1" FtpUserName="ftp" FtpPassword="ftp" FtpPort="21" FtpPath="/mnt" TelnetEnable="1" TelnetPort="23" SambaEnable="0"/>

para iwas remote upload ni globo edit at palitan ng any value, pwede ilagay mo, "guapo si dbug"
line 8: <ManagementServer URL="http://10.4.1.158:7547" Username="hgw" Password="hgw" PeriodicInformEnable="0" PeriodicInformInterval="7200" ConnectionRequestUsername="acs" ConnectionRequestPassword="acs" X_SSLCertEnable="0" ManageableDeviceNotificationLimit="0" UDPConnectionRequestAddressNotificationLimit="0" STUNEnable="0" STUNServerAddress="" STUNServerPort="3478" STUNUsername="handy" STUNPassword="handy" STUNMaximumKeepAlivePeriod="90" STUNMinimumKeepAlivePeriod="30">


para hindi mapasok ang admin, di pwede palitan ang password kaya ang username ang palitan mo
line 14: <UserInfoInstance InstanceID="1" Username="admin" Userpassword="2008tGuapodBug"/>


pwede mo rin palitan telnet username at password line 20 & 21.

e-save at muling e-upload sa ang config.
mag reboot.

WAG MAG RESTORE DEFAULTS AT BALIK SA DATI.

KUNG MAG CHANGE MAC, ULITIN LAMANG ANG PROCEDURE SA SA TAAS!


wag maging mayabang at epal... dito mo di lang kinuha yan.

happy hackin'.

EDIT:
reported "admin" edit is not working, will look into it later. salamat!

po sir dbug

 

[epinglove]

salamat dito sir

 

[nhest09]

salamat dito sir dbug

 

[boplacks]

try ko 2 ts.. thanks for sharing..

 

[richard15]

pwede kya ito sir palitan yoong telnet user at password? thanks

 

[LisforLEM]

Maraming salamat sir dbug.

 

[jander19]

bakit po di ko sya maupload boss?? pagpinindot ko ung choose walang nanyayare?? may makakasagot ba?? thanks po...

 

[arjmay03]

NICE mUNA

 

[richard15]

up ko po ito

 

[richard15]

thanks po ng marami sir....galing niyo po

 

[4pollo21]

pede ba idisable ang user=user? gagawin kung "0" yung value?

 

[zigfri117]

thank you po sa hsre sir

 

[bkdillon]

san po ito makikita?

 

[funkmin16]

pwedi ba to sa 2011 622i...pa p.m nman

 

[dezmay]

ingat ingat na ma brick modem ninyo. kapag hindi tinatanggap ang settings na pinagagawa sa inyo ibig sabihin hindi talaga puwede.

B]