REMOTED BM622, BM622m, BM622i

[blueguy052001]

This are the fallowing errors that can be corrected:
How To Fix Tulala LED BM622, BM622m, BM622i?
No signal Lights
My LAN continues Refresh connected disconnected if 622m firmware while on Greenpacket firmware
LAN is normally connected.
622m web GUI status Ready
Possible solution for 169 IP
Unidentified Network

Other find a solution use Winpsreader every time you want to connect ( hustle sign)

Fix Restore your modem settings

Continues LAN and Ready on Status (Normally this must be connecting not Ready)
1. Get a Winspreader and Smart v7 firmware
2. Open a Winspreader browse the Smart v7 firmware Hit start.
3. Plug your Modem Power and Lan Cable the wait a few minutes.
4. check the web GUI , type the 192.168.254.1 on your browser
5. If you Gui Change to Smart.

upload_2014-8-3_9-20-32.

Open telnet 192.168.254.1
login: mt7109
password:wimax
sncfg dset ADMIN_NAME admin (Enter)
sncfg dset ADMIN_PASSWD '$1$k2I9hJe4$OkHKF43oTmjvv3zJtrEZ4.' (Enter)
sncfg commit (Enter)
/factoryreset.sh (Enter)


NOTE: Kung tamad kapa i type yan gamit ka scripts pang change mac ng Greenpacket palitan mo lang ng IP 192.168.254.1


6. After Reboot your default gateway should be 192.168.15.1 because that is the default IP for smart.
Open a browser type 192.168.15.1
log in user :admin pass:smart

7. Go to Management -->> Upgrade --->> browse your 622m firmware Hit upgrade
wait 10 to 15 minutes slowly but surely effective flashing.

8. After done Upgrade it will reboot hit that reboot and wait.

9. reboot done check ip still 192.168.15.1 (smart)
Open a browser type 192.168.15.1 then you will see PINK page with error link is like this Please Login or Register to view links

Now open a telnet again
Telnet 192.168.15.1

Login:Firefly
Pass:$P4mb1h1r4N4m4nT0!!
/factoryreset.sh (enter)


NOTE: wag na wag gagamitin eto pang factory /etc/default.cfg baka mag kaka hardware atsutsu ka balik na naman tayo sa umpisa nun.


10. dahil nag factory reset tayo automatic walang telnet yan log in ka
username: user
password: 0SlO051O
Go to Please Login or Register to view links para ma access telnet niyo
CHECK TELNET and click apply.

11. Finally No signal Light lagyan ng signal lights

Now open a telnet again
Telnet 192.168.15.1

Login:Firefly
Pass:$P4mb1h1r4N4m4nT0!!
rm etc/default.cfg ( Enter )
reboot (Enter)



rereboot yan may ilaw na modem niyo.

Take Note yung original MAC and sêrïâl niya sa sticker ay babalik parang brand new ulit yung modem niyo , at kung signal light lang habol niyo skip niyo nalang mga ibang step diretso na kayo sa step 11


Optional kung 169 yung IP mag static saka ka mag winspreader with 622m firmware kung kaya pa.



credit po ito sa kapitbahay!

 

[masterkilla34]

bossing pahelp nman po hindi kc ako makapasok sa login as admin ng BM622 ko 2011 po model nya.. ginamit ko na po ung password na ginerated ito po ung generated pass. 2008w2TyAe_PFXLC user admin: admin peru hindi parin eh.
PLEASE HEEELLPPP..

salamat.

 

[pia9999]

sir panu naman po bm622 at bm622i tut. po

 

[bebotako]

Sana po ikaw, na makatulong sa akin, pwede ko ba ma factory reset yung 22i 2010 ko? Di kasi ako maka log in eh, laging password error, dati nman po user user lang, tia

 

[allan gemo]

ts maraming salamat dito sa tutorial mo napagana ko bm622m ko na hindi umiilaw ang signal lights

 

[jologzz060682]

bossing pahelp nman po hindi kc ako makapasok sa login as admin ng BM622 ko 2011 po model nya.. ginamit ko na po ung password na ginerated ito po ung generated pass. 2008w2TyAe_PFXLC user admin: admin peru hindi parin eh.
PLEASE HEEELLPPP..

salamat.

"search" mo dito sa symb.. may password generator para sa 2011 model...

 

[sk8erboi2004]

mga ser pede ba smart firm ware sa 22i? na 169 kasi modem ng tropa ko sana may mag post ng para sa bm622i na flashing? tnx po to all symbianizer! mabuhey!

 

[blackvirus03]

Sir may pag asa pa ba to?? http://www.symbianize.com/showthread.php?t=1351503