"Thread Agent Team"=l=Thread for Wimax Problem

[splikiliki]

Re: "Thread Agent Team"=l=Thread for Wimax Problem

sir meron po ba kayong tut para sa naging 169.xxx.xxx ang ip para po sa bm622m 2013 v19? TIA po

 

[theraryu]

Re: "Thread Agent Team"=l=Thread for Wimax Problem

sir meron po ba kayong tut para sa naging 169.xxx.xxx ang ip para po sa bm622m 2013 v19? TIA po

eto try mo tol
http://www.symbianize.com/showthread.php?t=1155227

 

[ejay0222]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

kung totoo to.. sana nmn tulungan nyu kami sa bm622i 2011 namin no signal , can't access gui po...

 

[theraryu]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

kung totoo to.. sana nmn tulungan nyu kami sa bm622i 2011 namin no signal , can't access gui po...

Type
ipconfig /release
ipconfig /flushdns
netsh winsock reset
netsh int ip reset c:\resetlog
netsh int reset all
netsh routing reset all
netsh routing dump

Then Plug wimax modem

Open Cmd again
Type
ipconfig/renew

 

[hifi_me]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

@theraryu.. bro.. gud eve.. tabo gamit ko.. no bsid.. kahit anong palit ko ng mac.. ayaw talaga..nakaka-access naman po ako sa gui as admin at tsaka sa telnet.. no bsid lang talaga problema.. na try ko sa isang wimax ko.. working naman yung mac.. aware po ako sa new/old mac series - new/old wimax password - new/old wimax models... na share ko na ito kay bro LOLO.. sabi niya refresh firmware lang daw.. pa'no po ba mag refresh ng firmware.. halos kasi nakikita ko dito is downgrade/ upgrade lang po.. pa help naman po.. salamat..

 

[boss214]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

boss theraryu ask ko lng nde na kse ako mksnipe gmet co ung wimac hunter v3.5 advice nmn nu mgndang off set.hehehe.tska bka my extra ka dyan.den ask ko lng dn ung tabo bm622 2011 nclose ko ata telnet at ssh nde co mchange mac kht anung reset co sa likud ng tabo wla e.d co dn xa ma pass generate.tnx sa ssgut

 

[ejay0222]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

Type
ipconfig /release
ipconfig /flushdns
netsh winsock reset
netsh int ip reset c:\resetlog
netsh int reset all
netsh routing reset all
netsh routing dump

Then Plug wimax modem

Open Cmd again
Type
ipconfig/renew

cmd po ba itype idol?? pwd po pa print screen??

 

[walanjoe]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

share ko yung akin sa kakatambling ng 22i ko sa kasagsagan ng panahong ng 22i,( itaas ang internal antenna sa bubong, lagyan ng fan, i-power on sa pamamagitan ng power line --lan cable wire) ayun bumigay din syadown and up ang signal o nag se-zero sa gui, repair na yan, ngayon gamit kona, sa mga mac dito ng symb nag-coconect naman

 

[theraryu]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

@theraryu.. bro.. gud eve.. tabo gamit ko.. no bsid.. kahit anong palit ko ng mac.. ayaw talaga..nakaka-access naman po ako sa gui as admin at tsaka sa telnet.. no bsid lang talaga problema.. na try ko sa isang wimax ko.. working naman yung mac.. aware po ako sa new/old mac series - new/old wimax password - new/old wimax models... na share ko na ito kay bro LOLO.. sabi niya refresh firmware lang daw.. pa'no po ba mag refresh ng firmware.. halos kasi nakikita ko dito is downgrade/ upgrade lang po.. pa help naman po.. salamat..

baka naka lock yung frequency nya,tignan mo muna

- - - Updated - - -

boss theraryu ask ko lng nde na kse ako mksnipe gmet co ung wimac hunter v3.5 advice nmn nu mgndang off set.hehehe.tska bka my extra ka dyan.den ask ko lng dn ung tabo bm622 2011 nclose ko ata telnet at ssh nde co mchange mac kht anung reset co sa likud ng tabo wla e.d co dn xa ma pass generate.tnx sa ssgut

dun sa offset tol advice ko lang, di importante ang offset dahil mabilis naman mag snipe yung tools so 1 incre or decre lang,
sa 2nd question mo di kita masagot jan..wala pa akong idea
at sa generate naman kung default lang yung serial na ginamit mo at di mo pinalitan..tignan mo sa ilalim yung sticker may serial dun,.tapos open ka cmd din type arp -a para malaman mo yung mac na ginagamit mo..

- - - Updated - - -

boss theraryu ask ko lng nde na kse ako mksnipe gmet co ung wimac hunter v3.5 advice nmn nu mgndang off set.hehehe.tska bka my extra ka dyan.den ask ko lng dn ung tabo bm622 2011 nclose ko ata telnet at ssh nde co mchange mac kht anung reset co sa likud ng tabo wla e.d co dn xa ma pass generate.tnx sa ssgut

dun sa offset tol advice ko lang, di importante ang offset dahil mabilis naman mag snipe yung tools so 1 incre or decre lang,
sa 2nd question mo di kita masagot jan..wala pa akong idea
at sa generate naman kung default lang yung serial na ginamit mo at di mo pinalitan..tignan mo sa ilalim yung sticker may serial dun,.tapos open ka cmd din type arp -a para malaman mo yung mac na ginagamit mo..

 

[hifi_me]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

@ theraryu.. ano po ibig niyo sabihin na "naka lock ang frequency"? nagagawa ko naman po bro magpalit ng frequency, wala pa din bsid talaga... maraming salamat..

 

[lordglen86]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

Sir theraryu, help po sana.. i'm using BM622i....

Issue: Can't change MAC address
Steps that I've done so far: Use different tools like (Wimax Tool) [Syntax].. the problem is it doesn't recognize new series... Use SEARCH button and read couple of TUTs about my problem, tried a lot of new TOOLS... one of them is Wimax Tool 3.0 by yyyxyyyz... Un nga lang hangang sa last part lng sya at sinsabi nya may missing file daw. Which is weird..
Help: Need assistance about changing my MAC address... meron na kc ako new series MAC na working daw pero I haven't tried it kc d ko machange ung MAC... nag try din ako nung TUT about http://www.symbianize.com/showthread.php?t=1120077&highlight=new+series kaso d ko magets.. pang bm622 kc ginamit.. Try ko mag generate ng password using WIMAX tool.. incorrect password daw sabi ng GUI nung nag try ako maglog in using ADMIN... Sana po mapansin nyo po ung post ko thanks in advance.

 

[warren1988]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

Sir theraryu, help po sana.. i'm using BM622i....

Issue: Can't change MAC address
Steps that I've done so far: Use different tools like (Wimax Tool) [Syntax].. the problem is it doesn't recognize new series... Use SEARCH button and read couple of TUTs about my problem, tried a lot of new TOOLS... one of them is Wimax Tool 3.0 by yyyxyyyz... Un nga lang hangang sa last part lng sya at sinsabi nya may missing file daw. Which is weird..
Help: Need assistance about changing my MAC address... meron na kc ako new series MAC na working daw pero I haven't tried it kc d ko machange ung MAC... nag try din ako nung TUT about http://www.symbianize.com/showthread.php?t=1120077&highlight=new+series kaso d ko magets.. pang bm622 kc ginamit.. Try ko mag generate ng password using WIMAX tool.. incorrect password daw sabi ng GUI nung nag try ako maglog in using ADMIN... Sana po mapansin nyo po ung post ko thanks in advance.

2010 or 2011 yan sir? Try mo yung tools ni sir jeffpasaway para sa 2011 alam ko merun din sya for 2010,pag ayaw try mo naman yung v3.0 ni sir yyyxyyyz, change mac ka muna gamit yung reboot method, then repeat mo yung process this time restore naman make sure untick mo yung old mac naka check ata yun by default and make sure na working new series of mac ang gamit mo at kung talagang di uubra,
Pasok ka dito http://www.symbianize.com/showthread.php?t=1185806 baka matulungan ka sa pagedit ng user id at password

 

[Augustinex]

mga masters.. my ask lang po ako..at favor na din.

pwede po ba kong mag hunt or scan nang new series mac using my old modems? kc wala naman ako new modem.. pero nkpang hingi ako nang live mac na new series and xa po gamit q ngayon..so im wondering if i can scan more mac using this new series mac na nsa old modem ko. bm622 2009 pa po tong gamit ko sir.. sana po may tool kayo jan na pde ko mgamit pra mapalawak ko kaalam ko about new series nten.. pa message na din po nang link dun sa tool if may alam kayo mga master..sana po ma help nyo ko.. mabuhay po kayo mga thread masters

 

[theraryu]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

@ theraryu.. ano po ibig niyo sabihin na "naka lock ang frequency"? nagagawa ko naman po bro magpalit ng frequency, wala pa din bsid talaga... maraming salamat..

e.restore default mo yung wimx mo para bumalik lahat yung frequency din change mac ka..pag walang kumagat na freqeuncy means dead mac..try lang ng try kung wlaa talaga baka hardware problem na yan

- - - Updated - - -

Sir theraryu, help po sana.. i'm using BM622i....

Issue: Can't change MAC address
Steps that I've done so far: Use different tools like (Wimax Tool) [Syntax].. the problem is it doesn't recognize new series... Use SEARCH button and read couple of TUTs about my problem, tried a lot of new TOOLS... one of them is Wimax Tool 3.0 by yyyxyyyz... Un nga lang hangang sa last part lng sya at sinsabi nya may missing file daw. Which is weird..
Help: Need assistance about changing my MAC address... meron na kc ako new series MAC na working daw pero I haven't tried it kc d ko machange ung MAC... nag try din ako nung TUT about http://www.symbianize.com/showthread.php?t=1120077&highlight=new+series kaso d ko magets.. pang bm622 kc ginamit.. Try ko mag generate ng password using WIMAX tool.. incorrect password daw sabi ng GUI nung nag try ako maglog in using ADMIN... Sana po mapansin nyo po ung post ko thanks in advance.

try mo mag manual change mac kung 2010 yan ito
BM622i 2010 CHANGE MAC

Login wimax
Passwordwimax820
ATPdiag set macaddr XXXXXXXXXXXX
set Lan mac address success
Lan mac address updated XXXXXXXXXXXX
set Lan Mac address Sucess
Wan mac address updated XXXXXXXXXXXX
ATP diag restore default


kung 2011 ito
BM622i 2011 CHANGE MAC


1st po dØwnlØad nyo to...
<bm622i sa baba>
2nd: connect nyo bm622i nyo sa pc
3rd run nyo yung firmware upgrader pero wag nyo po i upgrade..yaan nyo lang nakaopen..
4th: go to>start>run>cmd tpos type nyo telnet then enter
5th: after type nang telnet type nyo o 192.168.254.1
6th: LOGIN: Firefly PASS: $P4mb1h1r4N4m4nT0!! then enter
7th: ATP>xiugai macdizhi XX:XX:XX:XX:XX:XX (yan po yung mac na ilalagay nyo)
8th: ATP>diag restore default

note: pag 2011 kailangan mo muna open yung upgrader nya ng mga 10secs bago ka makapasok sa telnet
kung wla parin..baka hardware problem na din yan

- - - Updated - - -

mga masters.. my ask lang po ako..at favor na din.

pwede po ba kong mag hunt or scan nang new series mac using my old modems? kc wala naman ako new modem.. pero nkpang hingi ako nang live mac na new series and xa po gamit q ngayon..so im wondering if i can scan more mac using this new series mac na nsa old modem ko. bm622 2009 pa po tong gamit ko sir.. sana po may tool kayo jan na pde ko mgamit pra mapalawak ko kaalam ko about new series nten.. pa message na din po nang link dun sa tool if may alam kayo mga master..sana po ma help nyo ko.. mabuhay po kayo mga thread masters

tol advice ko sayo wag mo ng gamitin ang wimx na yan kung mag e.snipe ka ng new series,.pwede kang ma blankwan jan dahil na siguro sa kalumaan..advive ko sayo bili ka ng 22m 2012 para makapag snipe ka

 

[hifi_me]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

@theraryu.. every time na mag change mac ako restoredef naman po gamit ko at bumabalik naman lahat ng frequencies.. pero no bsid pa din.. so ibig niyo po sabihin.. hardware problem na po ito?? upgrade kaya from 2010 to 2011.. ma fix kaya to? salamat..

 

[theraryu]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

@theraryu.. every time na mag change mac ako restoredef naman po gamit ko at bumabalik naman lahat ng frequencies.. pero no bsid pa din.. so ibig niyo po sabihin.. hardware problem na po ito?? upgrade kaya from 2010 to 2011.. ma fix kaya to? salamat..

try mo tol, pero kapag 2011 na di na masyado maganda pang snipe ng mac

 

[PrinceHacker08]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

@thearyu sir. Anyare kaya d2 sa 2 wimax ko. 3 wimax ko lahat Bm622m.
ung isa connected. ung 2 naman connecting scanning lang.
Live mac naman gamit ko sa dalawa new scan kolng at nanghingi na rin ako ng mac pero not working sa 2 modem ko.
ayos naman pagkakapalit ko. new series or old series parehas kong ginamit dahil marunong naman ako gumamit nun..

Ginamit ko ung mac nung Connected kong isa. Pero Ayaw din Mag-CDC dapat un dba?
pero Connecting Scanning ready lng ang status ng dalaw.
Ano kaya problem sir? Salamat po

 

[ton123]

^ganito din problema nung akin katukad kay Princehacker

 

[asyong69]

Sir mgtatanong lang ako may nakita kase ako dito n thread about POE ang tanong ko po ay kung ok ba yun gamitin tpos kung ok po pwde parin po xang lagyan ng fan at switch button?? Wala p kase akong nakitang ganun di ko alam kung pano gawin...sana mau link o advice kung pano gawin..bm22i po gamit ko..salamat

 

[theraryu]

Re: ===^*^Thread for Wimax Problem (Dito nyo i-post!)^*^===

@thearyu sir. Anyare kaya d2 sa 2 wimax ko. 3 wimax ko lahat Bm622m.
ung isa connected. ung 2 naman connecting scanning lang.
Live mac naman gamit ko sa dalawa new scan kolng at nanghingi na rin ako ng mac pero not working sa 2 modem ko.
ayos naman pagkakapalit ko. new series or old series parehas kong ginamit dahil marunong naman ako gumamit nun..

Ginamit ko ung mac nung Connected kong isa. Pero Ayaw din Mag-CDC dapat un dba?
pero Connecting Scanning ready lng ang status ng dalaw.
Ano kaya problem sir? Salamat po

kung ma cdc man dapat naka on yung dalawang wimax mo..sa tingin ko tol mc lang problema jan..try mo mag snipe ng new series tapos try mo dun sa dalawa mong wimax,.experiment lng
or baka mali yung frequency