- Messages
- 845
- Reaction score
- 1
- Points
- 28
credits to kay koelo, eto yung pinaka-una nyang TUT. yung ngayon kasi nag-hihingi ng unlock code yung bagong TUT nya.
pagka-unlock:
1. magiging GLOBE VISIBILITY dashboard mo
2. magiging mf626 ang firmware(pero unlock na)
3. walang UNLOCK code na kailangan.
tools needed:
1. ( MF626UpdateTool_GLOBE_PHV1.2.exe) http://www.mediafire.com/?6rzqphbbd3qlrc3
2.2. (DL_MF627_SMART_PH_EUV1.00.02.exe) http://www.mediafire.com/?m5ge1twwwnn
eto yung buong procedures:
1. Connect zte MF627 kit to the usb port
2. Run upgrading tOoL ( 1. MF626UpdateTool_GLOBE_PHV1.2.exE) " wait until it recognize your kit and don't close & goto-- C:\Program Files\Windows Service\MF626newversion folder---- then copy all files in one folder sa desktop.....pagka copy na lahat close na ung ( 1. MF626UpdateTool_GLOBE_PHV1.2.exe )
3. Run upgrading toOL for v.04 "ung pang upgrade ng sandbox dashboard" wait until it recognize your kit and don't close & goto-- C:\Program Files\Windows Service\MF100newversion folder------- then delete all the files naman tayo........
4. COPY & PASTE ALL OF THE FILEZ THAT YOU COPY BEFORE IN DESKTOP in Program Files\ Windows Serice\ MF100newversion folder after that close
the folder.................REMEMBER TO CLOSE BEFOR DOING STEP 5-----IGNORE NIO LNG YONG NAKASULAT NA IUUPGRADE DAW SIA
SA V.04
5. TICK DOWNLOAD BUTTON OF THE UPGRADING TOOL FOR V.04 WAIT TILL FINISH..............
screenshots: paki-sundan na lang po. madali lang intindihin to.
1.
[/IMG]
2.
[/IMG]
3.
4.
[/IMG]
5.
6.
7.
eto naman yung TUT para sa mga nagkae-error sa FIRMWARE (credits kay sir TlMMY)
1. install mo muna un QPST....QPST_Setup http://www.mediafire.com/?l7qvi871l6e6qku
2. tapos isaksak mo na un ZTE MF627.
3. run mo na un QPST Configuration
4. tapos click mo yung "Ports" makikita mo sa bandang itaas iclick mo..( wag ka magpost na hindi mo makita ^_^ haha piz. magbasang mabuti)
5. tapos click mo "add new port" nasa lower right corner
6. tapos click mo naman COMX - USB/QC Diagnostic (kaya 'X' yun kasi depende kung anong com port number yung sa inyo) . tapos click OK..
7. tapos click mo sa taas start clients > tapos click EFS Explorer tapos click OK
8. then, idelete mo lahat ng file pero hindi kasama yung mga nakafolder"right click mo lang sa files tapos click delete...( be sure na nadelete mo lahat ng files na wala sa folder) (itira mo lang yung mga nakafolder)
9. tapos icopy mo lahat ng files dito smartbro v2 http://www.mediafire.com/?47isd3in9be52bg
10. exit QPST,may magpo-pop up na message,YES mo lang. magre-restart yung broadband mo.
11. pag OK na, balik ka na sa Procedure sa Taas.
eto lang gawin nyo lagi pag nagka-error kayo, kasi ibabalik nito sa original na firmware ang mf627 nyo..
para po sa di mapagana mf627 sa WINDOWS 7, download nyo po to, then install.
ZTE windows 7 driver
post lang ng tanong.. sagutin natin hanggat alam ang sagot..
feedback kung ano ang results sa inyo... thanks..
pagka-unlock:
1. magiging GLOBE VISIBILITY dashboard mo
2. magiging mf626 ang firmware(pero unlock na)
3. walang UNLOCK code na kailangan.
tools needed:
1. ( MF626UpdateTool_GLOBE_PHV1.2.exe) http://www.mediafire.com/?6rzqphbbd3qlrc3
2.2. (DL_MF627_SMART_PH_EUV1.00.02.exe) http://www.mediafire.com/?m5ge1twwwnn
eto yung buong procedures:
1. Connect zte MF627 kit to the usb port
2. Run upgrading tOoL ( 1. MF626UpdateTool_GLOBE_PHV1.2.exE) " wait until it recognize your kit and don't close & goto-- C:\Program Files\Windows Service\MF626newversion folder---- then copy all files in one folder sa desktop.....pagka copy na lahat close na ung ( 1. MF626UpdateTool_GLOBE_PHV1.2.exe )
3. Run upgrading toOL for v.04 "ung pang upgrade ng sandbox dashboard" wait until it recognize your kit and don't close & goto-- C:\Program Files\Windows Service\MF100newversion folder------- then delete all the files naman tayo........
4. COPY & PASTE ALL OF THE FILEZ THAT YOU COPY BEFORE IN DESKTOP in Program Files\ Windows Serice\ MF100newversion folder after that close
the folder.................REMEMBER TO CLOSE BEFOR DOING STEP 5-----IGNORE NIO LNG YONG NAKASULAT NA IUUPGRADE DAW SIA
SA V.04
5. TICK DOWNLOAD BUTTON OF THE UPGRADING TOOL FOR V.04 WAIT TILL FINISH..............
screenshots: paki-sundan na lang po. madali lang intindihin to.
1.
2.
3.
4.
5.
6.
7.
eto naman yung TUT para sa mga nagkae-error sa FIRMWARE (credits kay sir TlMMY)
1. install mo muna un QPST....QPST_Setup http://www.mediafire.com/?l7qvi871l6e6qku
2. tapos isaksak mo na un ZTE MF627.
3. run mo na un QPST Configuration
4. tapos click mo yung "Ports" makikita mo sa bandang itaas iclick mo..( wag ka magpost na hindi mo makita ^_^ haha piz. magbasang mabuti)
5. tapos click mo "add new port" nasa lower right corner
6. tapos click mo naman COMX - USB/QC Diagnostic (kaya 'X' yun kasi depende kung anong com port number yung sa inyo) . tapos click OK..
7. tapos click mo sa taas start clients > tapos click EFS Explorer tapos click OK
8. then, idelete mo lahat ng file pero hindi kasama yung mga nakafolder"right click mo lang sa files tapos click delete...( be sure na nadelete mo lahat ng files na wala sa folder) (itira mo lang yung mga nakafolder)
9. tapos icopy mo lahat ng files dito smartbro v2 http://www.mediafire.com/?47isd3in9be52bg
10. exit QPST,may magpo-pop up na message,YES mo lang. magre-restart yung broadband mo.
11. pag OK na, balik ka na sa Procedure sa Taas.
eto lang gawin nyo lagi pag nagka-error kayo, kasi ibabalik nito sa original na firmware ang mf627 nyo..
para po sa di mapagana mf627 sa WINDOWS 7, download nyo po to, then install.
ZTE windows 7 driver
post lang ng tanong.. sagutin natin hanggat alam ang sagot..
feedback kung ano ang results sa inyo... thanks..
Last edited:
((
