WiMAX BM622i PASOK

[potpot99]

page 149,, ilan page pba?

 

[einnor0825]

wala bang ebook para d2?

 

[ke_nji_666]

hay salamt at may napala yung pagpupuyat ko...



@all...
wag na masyadong maraming tanung,nandun na lahat ng TUT na ibinigay ni sir animal...
pag aralan nyo na lang mabuti,pinaikot ikot lang kayu,pero dalawang command lang
naman ang kailangan nyong i enter,haiissst,nalasing ako dun huh!






salamat nga pla kay sir animalitycomz....




God bless!

buti si sir andrew alam na hehehe nasira na yung bm622i kong isa dito limited no connectivity na hahaha

 

[yuen1987]

cnu po nakaka alam ng tutorial para po mag palit ng mac address ng bm622..alam ko na po yung admin password ko pero diko pa po kasi alam mag palit ng mac address sana po may makatulong po dito sa threads na to..thanks po advance..

 

[potpot99]

cnu po nakaka alam ng tutorial para po mag palit ng mac address ng bm622..alam ko na po yung admin password ko pero diko pa po kasi alam mag palit ng mac address sana po may makatulong po dito sa threads na to..thanks po advance..

search mo ung thread ni boss tashew

 

[geraldong007]

use ip link set macaddr XX:XX:XX:XX:XX:XX dev icc0

but its prompt you "dev" is duplicate or xx.xx.xx.xx is garbage

use ip link set address XX:XX:XX:XX:XX:XX dev icc0

 

[ke_nji_666]

use ip link set address XX:XX:XX:XX:XX:XX dev icc0

working na sir?

 

[jehh]

but its prompt you "dev" is duplicate or xx.xx.xx.xx is garbage

incompatible mac pala yan. ha ha ha

ip link set address XX:XX:XX:XX:XX:XX dev icc0

<<< still not changing your mac add.

 

[jayx5d]

ito po yong kay animalitycomz oh

Modification from animalitycomz shell commands:
-------------------------------
-----Welcome to ATP Cli------
-------------------------------

Login: wimax
Password:
ATP>cmd SetUserMode super <enter>
ATP>shell <enter>
/ # cd bin <enter>
/bin #
/bin # telnetd <enter>
/bin #
/bin # equipcmd setAssemblyenable <enter>
Enable assembly success/bin #
/bin # equipcmd 11 78:1D:BA:XX:XX:XX (or use this command equipcmd setmacaddr

78:1D:BA:XX:XX:XX)
Set HWaddr success/bin #
/bin #
display ouinum ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ success/bin #
/bin #
/bin # equipcmd setserialnum 500810118xxxxxxx
Set sn success/bin #
/bin #
/bin # equipcmd swversion display
software version: V100R001PHLC08B025
pcb version: 16843009
cfe version: BM622i
display version success/bin #
/bin # exit <enter>
ATP>logout
logout from configuration console.
Disconnect from server
Connection to host lost.
Press any key to continue...<enter>
Welcome to Microsoft Telnet Client
Escape Character is 'CTRL+]'
Microsoft Telnet> o
( to ) 192.168.254.1
Connecting To 192.168.254.1...
Microsoft Telnet>q <enter>
Z:\Documents and Settings\animaltycomplex>exit <enter>

login to: http://192.168.254.1
Then Reboot to refresh config.

- OR -


try these commands, after telnetd function.. but first look for the exact DEVICE name..
===
- ip link set address NEWMAC dev eth0 (NEWMAC == xx:xx:xx:xx:xx:xx) and eth0 is the DEVICE
- ip link show eth0 ( this command is to verify if the MAC switched)
===
if not successful, reason:
you may not be able to change the MAC address while the link is
up...try:

- svi dhclient stop
- net stop
- ip link set eth0 address xx:xx:xx:xx:xx:xx <== newmac and eth0 is the Device name
- net start
- svi dhclient start
- ip link show eth0

====
to set DEVICE up or down, you can also use:
- ip link set DEVICE up <=== set device up
- ip link set DEVICE down <=== otherwise
- ifconfig up / down
- ifdown
- ifup
====

2nd

Eto po ung iba pang command sana po makatulong

EVT::showEvent
EVT::disableAllEvent
EVT::setEventEnable
SNIFF::showState
SNIFF::log
SNIFF::dump
SNIFF::flush
CII::dump
ERAS::GenRegs
ERAS::IrqControl
ERAS::AfeControl
ERAS::ClockGating
ERAS::PhyFeBasic
ERAS::PhyFeExt
ERAS::PhyFeIqm
ERAS::PhyFeAgc
ERAS::PhyTsSync
ERAS::PhyFeMio
ERAS::PhyBe
ERAS::PhyBeCid
ERAS::ZspArmItf
ERAS::Mac
ERAS::Zsp
ERAS::UsbIp
ERAS::UsbHw
ERAS::RegsMap
ERAS::HW
ERAS::Mii
ERAS::Sdram
ERA::FifoShowAll
ERAS::Signals
ERAS::Sram
ERAS::Usim
ERAS::lpctrl
ERAS::SdioCccr
ERAS::SdioCfg
ERAS::SdioFbr1
ERAS::SdioIpReg
ERAS::SdioIpCfg
ERAS::PCM
ERAS::INTERCPU
SFWS::all
SFWS::summary
SFWS::fch
SFWS::dlMap
SFWS::fecDecoder
SFWS::fecEncoder
SFWS::dlHarq
SFWS::dlHarqCtx
SFWS::dlMimo
SFWS::dlZone
SFWS::config
SFWS::ulMap
SFWS::schedulerContext
SFWS::smttStats
SFWS::hwRegisters
SFWS::cidList
SFWS::diucList
SFWS::spursCfg
SFWS::resetDlStats
SFWS::resetUlStats
SFWS::resetStats
SFWS::dlMapDump
SFWS::fscDump
SFWS:rblDump
SFWS::sclDump
SFWS::acidInfo
SFWS::dumpSchedTrace
WMD::rfiTx
WMD::rfiRx
WMD::FifoList
WMD::FifoAll
WMD::FifoShow
WMD::FifoStat
WMD::FifoElem
WMD::FifoSeveralElem
WMD::FifoPktAddr
WMD::maskMio
WMD::showCid
WMD::showSa
WMD::showAuth
WMD::blobDump
WMD::MapTxStatsDump
WMD::MapTxStatsReset
WMD::MacPhyOutStatsDump
WMD::MacPhyOutStatsReset
WMD::PhyMacInStatsDump
WMD::PhyMacInStatsReset
WMD::BothMacPhyStatsDump
WMD::SyncStatsDump
WMD::SyncStatsReset
WMD::SetWatchedPbIndex
WMD::ChanMonCfgDump
WMD::IrqStatsDump
WMD::IrqStatusDump
WMD::IrqStatsReset
WMD::showSram
WMD::showMemories
WMD::ZspCmdStatsDump
WMD::ZspCmdStatsReset
WMD::ZspDumpLastEvents
WMD::ZspFilterEvents
WMD::ZspConfig
WMD::ZspDlCtcIter
WMD::showIQMismatchConfig
WMD::stopIQRxPhaseCorrection
WMD::stopIQRxGainCorrection
WMD::stopIQRxOffsetCorrection
WMD::forceIQTxPhaseCorrection
WMD::forceIQTxGainCorrection
WMD::forceIQTxOffsetCorrection
WMD::forceIQRxSpectralInversion
WMD::forceIQTxSpectralInversion
WMD::flipIQChannelsRx
WMD::flipIQChannelsTx
WMD::startIQRxPhaseCorrection
WMD::startIQRxGainCorrection
WMD::startIQRxOffsetCorrection
WMD::getIQVDcValues
WMD::ShowDcValues
WMD::ShowDcCompStatus
WMD::dumpZoneReport
WMD::setNoiseFigure
WMD::ShowIQPowerMeasurement
WMD::ShowFftInputPowerMeasurement
WMD::showPhs
WMD:hsStatsDump
WMD:hsStatsReset
WMD::setVdbg
WMD::showVdbg
WMD::resetMuxAlarmStats
WMD::muxAlarm
WMD::mioScheduler
WMD::resetMioStats
WMD::Alarm
WMD::SocDimension
WMDwerSaving
WMD::quartz
PMS::clients
SFD::Config
SFD::Factory
SFD::Manager
SFD::Processor
SSD::Manager
SSD::CommandProcessor
SSD:ispatcher
SSD::Lookup
SSD::SsPool
SSD::PwsInfo
MMD::Global
MMD:etails
MMD:iscardMacMessages
NDSS::database
NDSS::state
NDSS::clearDatabase
NDSS::dumpPls
RFC::showRfcSdcLog
RFC::enableRfcSdcLog
RFC::showRfcSdcConfig
RFC::disableRfcSdcSwitch
RFC::resetRfcSdcDbgStats
RFC::status
RFC::dumpRegs
RFC::dumpReg
RFC::setRegister
RFC::sqn12x0SetTxGain
RFC::sqn12x0SetRxGain
RFC::sqn12x0SetFreqOffset
RFC::sqn12x0SetInputPower
RFC::sqn12x0SetPa
RFC::sqn12x0SetPpaCode
RFC::sqn12x0SetModCode
RFC::sqn12x0Switch
RFC::resetToDefault
RFC::sqn12x0StartPpaCalibration
RFC::sqn12x0SetRgCoeff
RFC::sqn12x0GetTemp
RFC::setExternalLnaState
RFC::sqn12x0SetRssi
FC::ConfigManager
DLC::ConfigManager
ULC::ConfigManager
PSCD::setMaxSlpDuration
PSCD::Factory
PSCD::Manager
PSCD::PscManager
PSCD::Scheduler
MMT::Global
MMT:etails
MMT::Pool
ARQ::Pump
ARQ::CidManager
ARQ::CidDataBase
ARQ::Cid
ARQ::ResetCidStats
ARQ::ResetPumpStats
ARQ::setDbgDropProba
HARQ::Pump
HARQ::CidManager
HARQ::Cid
DLCS::synchronization
DLCS::acquisition
DLCS::gainControl
DLCS::freqControl
DLCS::mapDetection
DLCS::cmdProcessor
DLCS::irqProcessor
DLCS::syncProcessor
DLCS::sdcManager
DLCS::scan
DLCS::speedControl
DLCS::showPhyStats
DLCS::resetFreqStats
DLCS::setSpeedEstimator
DLCS::selectOperator
DLCS::setDozeThreshold
DLCS::resetDozeThreshold
DLCS::setSdcConfig
DLCS::setSdcDbgMode
DLCS::setScanninConfig
DLCS::setZoneConfig
DLCS::setMimoFeedbackConfig
DLCS::zoneConfig
DLCS::addSpuriousFrequency
DLCS::showSpuriousFrequency
DLCS::removeSpuriousFrequency
DLCS::enableDcCancellation
DLCS::setT21Timeout
MSS::Scheduler
UMSS::Config
UMSS::Scheduling
UMSS::Profiling
UMSS::MapParsing
UMSS::CidDataBase
UMSS::Cid
UMSS::Acid
UMSS::HarqDump
UMSS::resetStats
UMSS::setFragEnable
UMSS::enablePacking
UMSS::setConcatEnable
UMSS::setPiggybackEnable
UMSS::setBuildMargin
UMSS::dumpRecords
UMSS::clearRecords
UMSS::setSIMaxPacketQty
UMSS::setBwrPolicy
UMSS::setErtpsInactivityDetectionFactor
UMSS::lastMap
UMSS::fecStats
UQSS::QoSScheduler
UQSS::CidManager
UQSS::CidDataBase
UQSS::Cid
UQSS::enableUlCid
RNGS::Config
RNGS::CurrentState
RNGS::Statistics
RNGS::showRPD133State
RNGS::alterRanging
RNGS::setConfig
RNGS::enableRPD133
RNGS::disableRPD133
UPCS::configuration
UPCS::controller
UPCS::forcetPowerControlModeChange
UPCS::setConfiguration
SBCS::CurrentState
SBCS::Statistics
PKMS::showConfig
PKMS::showRsa
PKMS::showAuth
PKMS::showSa
PKMS::setConfig
REGIS::CurrentState
REGIS::Statistics
REPS:ump
DSX::config
DSX::factory
DSX::showSsInfo
DSX::enableDsx
DSX::dropDsa
FWD::Notice
DMC::Classifier
DMC::CidManager
DMC::CidDataBase
DMC::Cid
RTM::dataFlow
RTM::resetDataFlow
RTM::CidManager
RTM::CidDataBase
RTM::Cid
RTM:iscardPackets
RTM::showDiscardPackets
ETM::dataFlow
ETM::resetDataFlow
ETM::setFilteringEnable
ETM::setFilteringSource
ESF::Collector
THTP::CommandInfo
THTP::CommandReset
NBSD::Manager
NBSD:ispatcher
NBSD::addBs
NBSD::getBsInfo
NBSD::deleteBs
NBSD::deleteBsFromMacAddress
MOBS::Manager
MOBS::setConfig
MOBS::reset
HOSS::Config
HOMS::config
HOMS::manager
HOMS::setConfig
SLPS::manager
SLPS::showInfo
SLPS::resetStat
SLPS::notifyBsScan
DREGS::ssDRegReq
IDLS::showConfig
IDLS::showInfo
IDLS::setDefaultPagingCycle
DLAS::LinkAdapter
DLAS::setDcdCheck
DLAS::setReuseFrequency
PSMS::disablePllOff
PSMS::enableSleepAuto
PSMS::enableIdleAuto
PSMS::enableDozeMode
PSMS::enableWakeOnHost
PSMS::changeSleepAutoDelay
PSMS::changeIdleAutoDelay
PSMS::showConfig
PSMS::showInfo
PSMS::showIdleHoConfig
PSMS::resetStat
PSMSwerDown
PSMS::config
CBE::showMacUl
CBE::showMacDl
CBE::showMacFrame
CBE::showMacStatsRx
CBE::showSsCaps
CBE::showCaps
CBE::setCaps
CBE::setHarqCategory
CBE::showSf
CBE::createSf
CBE::changeSf
CBE::deleteSf
CBE::setSfEnable
CBE::showPhsSf
CBE::createPhsSf
CBE::deletePhsSf
CBE::setMii
CBE::showMii
CBE::showTime
CBE::filterLog
CBE::enableLog
CBE::disableLog
CBE::enableThpLog
CBE::showLog
CBE::enableSniffer
CBE::setSnifferVerbose
CBE::setSnifferParams
CBE::disableSniffer
CBE::showSniffer
CBE::clearSnifferFilters
CBE::createSnifferFilter
CBE::Sniffercommand
CBE::deleteSnifferFilter
CBE::setSniffDump
CBE::ShowSniffDump
CBE::showMacAddress
CBE::setFatalErrorMode
CBE::showFatalErrorMode
CBE::dumpCoop
CBE::resetCoop
CBE::showPkmCs
CBE::setPkmCs
CBE::showNeighborBs
CBE::showPsc
CBE::createPsc
CBE::changeSleepId
CBE::modifyPsc
CBE::deletePsc
CBE::activatePsc
CBE::deactivatePsc
CBES::setQosRedUlDefaultProfile
CBES::setQosRedUlMaxLatencyProfile
CBES::setQosRedUlDefault
CBES::showQosUl
CBES::showSsPhyStatsDl
CBES::startSs
CBES::stopSs
CBES::resetSs
CBES::showSs
CBES:erformHandover
CBES::requestPowerModeChange
CBES::showSsAuth
CBES::resetSsAuth
CBES::showSa
CBES::showRfRx
CBES::showRfTx
CBES::showRfConfig
CBES::showLinkAdaptationDl
CBES::setLinkAdaptationDl
CBES::showPhyStatsRx
CBES::setRfTx
CBES::showPacketFlow
CBES::resetPacketFlow
CBES::displayedition
CBES::showversion
CBES::setPowerMode
CBES::showGpiosState
CBES::setGpiosState
CBES::showAuthorizedGPIO
CBES::setIdleMode
CBES::showProvisionedPsc
CBES::setProvisionedPsc
CBES::modifyProvisionedPsc
CBES::setDebugAsicOutput
CBES::setScanning
CBES::showScanning
CBES::setHandover
CBES::showHandover
CBES::showNeighborBsStat
CBES::setIotMode
CBES::showIotMode
CBES::setDeviceMode
CBES::showDeviceMode
CBES::addChannelToScanner
CBES::showScanner
CBES::removeChannelFromScanner
CBES::clearScannerChannels
CBES::showHomeNsp
CBES::setHomeNsp
CBES::showProvisionedNAPs
CBES::addProvisionedNAP
CBES::removeProvisionedNAP
CBES::clearProvisionedNAPs
CBES::showProvisionedNSPs
CBES::addProvisionedNSP
CBES::removeProvisionedNSP
CBES::clearProvisionedNSPs
CBES::showNdssConfig
CBES::setNdssConfig
CBES::showDurationTimeout
CBES::setDurationTimeout
CBES::showHoldingTimeout
CBES::setHoldingTimeout
CBES::forceScanning
CBES::showPlatform
CBES::setPin
CBES::setWatchDog
CBES::showWatchDog
THSP::setRxDropRate
THSP::setTxDropRate
THSP::setRxDropCount
THSP::setTxDropCount
THSP::setPayloadDump
THSP::setLogEnabled
THSP::SetMcState

>>>>>>>>>>>>>>>>>>
OUTPUT

3rd

ulet daw po... sa mga nagpm at nagpm ulet at isa pa ulet eto na po ulet... ang kukulet.. pero ok lang po yon no problem
ipagpalagay po natin na nakalogin na kayo sa bm662i via telnet
type nyo po ito

ATP>cmd : <enter>
ang lalabas po dyan limited command na nagsisimula sa "CBE" o CBES" limited po yata sa 117 commands lang
para po makapasok tayo sa 497 list ng command na available eto po
ATP>cmd setuser super <enter> eto ung command para po maging superman kayo
or
ATP>cmd setuser normal <enter> eto po para po maging regular lang kayong mamayan... wala po kwenta tong commab na to kaya wag nyo bigyan pansin...
ATP>cmd CMD::SetUserMode isSuperUser <enter>
pagkatapos po nyan
ATP>cmd : <enter>
ayan mapapansin nyo po na isang damukal na command yan na wala naman talagang kwenta kasi po dito tayo dapat magFOCUS ummm ano ba tawag dito 19robbie68 ?
ayun "linux like shell" daw po... hehe english yon pre...
dito po wala pong 95% na help limitado po ang my help dito so
advice lang po TAKE ALOT OF CARE daw.... english na naman po yon...
ATP>shell <enter>
/bin # <<eto po makikta nyo dapat...

/# <<kung eto po ang lumabas sa screen nyo ibig po sabihin nyan kulang po kayo sa SEX...
/# cd bin <<<eto po ang itype nyo tapos po enter
/bin # <<<ayan po ang output

may sumingit... unix shell daw po ito di daw po linux.
pasensya na po kami po ay natagay ng konti na meyo naparami na kaya ang kulet na nila

/bin # hwvconfig <enter>

to be continued tagay po muna tayo...

4th

kulang pala po habol ko na to mga bossing

eto po ung last
/bin # hwvconfig <enter> <tama po ba? o ako ang may tama na..

kung gusto nyo po makita ung setmacaddr at setserialnum...
at eto rin po para po ang command para makakuha kayo ng kacybersex...

/bin # equipcmd help

eto na po ang lalabas dyan

equipcmd swversion display == equipcmd 1
equipcmd adsl info == equipcmd 2
equipcmd chiptest adsl == equipcmd 3
equipcmd chiptest lanswitch == equipcmd 4
equipcmd usbtest == equipcmd 5
equipcmd wlanled on == equipcmd 6
equipcmd wlanled off == equipcmd 7
equipcmd wpsled on == equipcmd 8
equipcmd wpsled off == equipcmd 9
equipcmd setboardnum == equipcmd 10
equipcmd setmacaddr == equipcmd 11
equipcmd setserialnum == equipcmd 12
equipcmd setouinum == equipcmd 13
equipcmd boardnum display == equipcmd 14
equipcmd macaddr display == equipcmd 15
equipcmd serialnum display == equipcmd 16
equipcmd ouinum display == equipcmd 17
equipcmd setuserpwd == equipcmd 18
equipcmd setssid == equipcmd 19
equipcmd setwlpwd == equipcmd 20
equipcmd userpwd display == equipcmd 21
equipcmd ssid display == equipcmd 22
equipcmd wlpwd display == equipcmd 23
equipcmd setAssemblydisable == equipcmd 24
equipcmd setAssemblyenable == equipcmd 25
equipcmd settr064pwd == equipcmd 26
equipcmd tr064pwd display == equipcmd 27
equipcmd elabel display == equipcmd 28
equipcmd loadelabel == equipcmd 29
equipcmd backupelabel == equipcmd 30
equipcmd restoredefault == equipcmd 31

5th

use at your own risk...
sa mga unit po namin dito at ng mga tropa ok naman
meron nga lang po ibang unit na WRECK SHIT!!! na talaga

SetUserMode << eto po para maging admin o root o si superman ang login
set <<eto po para malaman kung tagumpay ang pagtawag mo kay superman
# set
HOME='/'
IFS='
PPID='4095'
PS1='# '
PS2='> '
PS4='+ '
PWD='/'
TERM='vt102'
USER='root' << eto po confirmation na si superman at hindi si batman ang natawag mo
ethaddr='00:E0:92:XX:XX:XX'

equipcmd setmacaddr 78:1D:BA:XX:XX:XX <<< d2 sineset ang mac
Set HWaddr success! <<< confirmation po na tagumpay ang katarantauhan nyo sa katawan

equipcmd setserialnum 5008101180100XXXXX<<d2 sineset ang sn
Set sn success!<<< confirmation na tagunpay ulet ang kalokohan nyo sa katawan

equipcmd swversion display <<<eto pangpahaba ng post

software version: V100R001PHLC08B025 <<<
pcb version: 16843009 <<<
cfe version: BM622i <<<
display version success! <<<

equipcmd restoredefault <eto ung command na kapareho ng restoredef ng bm622
#

equipcmd 15 << eto ewan ko kay 19robbie68 kung para saan to
Enable assembly success <<<whahahaha

>>>>>>> g_stMsgCtx.lSock < 0 ,return !
ATP_MSG_Send error! <<< ganto po ang msg na nalabas pag sumablay ang kalokohan mo

don po sa nag pm ayaw po bumukas ng inbox ng symbianize...
try ko po ulet mamaya i-open

6th

Modification from animalitycomz shell commands:
-------------------------------
-----Welcome to ATP Cli------
-------------------------------

Login: wimax
Password:
ATP>cmd SetUserMode super <enter>
cmd setuser normal <enter>
cmd CMD::SetUserMode isSuperUser <enter>
ATP>cmd : <enter>
/ # cd bin <enter>
/bin # hwvconfig <enter>
/bin # telnetd <enter>
/bin # svi dhclient stop
/bin # net stop
/bin # ip link set eth0 address xx:xx:xx:xx:xx:xx(newmac)
/bin # net start
/bin # svi dhclient start

 

[naruto01]

jax5d, masakit ulo ko jan...

 

[toypitz14]

Boss jayx5d, ito naba lahat ng compilation ng command???

THANKS!!

 

[anakbulan]

kay ganda ng umaga thank you SB

 

[trezkey]

nandyn na lahat pala hehe ayos tagay pa!

 

[jrwakka]

anu na po balita?may ngtagumpay na po ba?

 

[efren386]

http://www.mediafire.com/?mmqdzn2dtzz ----> tftp2.exe

ito gamit nang flash nang image nang firmware.

dapat meron tayo copy firmware yun upload natin.

 

[ke_nji_666]

incompatible mac pala yan. ha ha ha

<<< still not changing your mac add.

Need ba natin ng compatible mac from legit bm622i????

 

[Jayred8]

yun simulan na ang tagay!!!salamat!

 

[egayzhel]

feedbacks...

 

[neolicious29]

screenshots nman mga bossing para di nkatunganga kaming mga abangerz hehehehe

 

[Jamie06]

screenshots nman mga bossing para di nkatunganga kaming mga abangerz hehehehe

sir no luck talaga tau.. kahit dun sa kabila hindi ko pa din makuha.. sana totoo nga ung sinasabi nila na 2 commands lang daw pagtapos ng shell at cd bin.... hayyy.. daming oras na nasayang sa kakahintay at kakatest dito..