ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

[tawingkurimaw]

Para sa mga nag try mag Unlock ng SmartBro ZTE Mf190 nila na nag

" NO SIM "

or nag

" RED LIGHT "

or na Detect ng QPST na

" DEAD " ^_^

may pag asa na para ma BUHAY ulit ang MODEM nyo...hehehe...

Step 1.

Bago mo umpisahan ang pag BUHAY sa PATAY ^_^ uninstall mo muna lahat ng Dashboard at Sotwares nung ginamit mo sa pag UPGRADE gaya ng " ETISALAT " " BEETEL " at syempre ung sa
" SmartBro"

Step 2.

Run CCleaner para ma tanggal lahat ung naiwan na temp. files at registry. http://www.filehippo.com
dito ka DL para sa Latest Version ng CCleaner.

Step 3.

Saksak muna ung DEAD ZTE MF190 mo... Detect - Install Drivers - Install Software - Install Dashboard - Wait until mag Initiallize at lumabas ang DASHBOARD tapos CLOSE mo lang.

Step 4.

DL mo eto http://www.mediafire.com/download.php?o30haa6nb02b10h

then RUN mo lang ung PROGRAM...antayin hanggan matapos...

ma papansin mo habang nag ruRUN ung PROGRAM mag yeYELLOW ung LIGHT ng MODEM mo...hehehe...may PROGRESS at PAG-ASA na babangon mula sa KAMATAYAN ung MODEM mo...

Step 5.

Pagkatapos na magRUn ung program tanggalin mo ung MODEM then saksak mo ulet...Install mo ung Drivers at Program / Dashboard ng MODEM... MOVISTAR ung bagong DASHBOARD mo...Wait until finish at mag initialize tapos close mo lang...

Step 6.

then DL mo ETO http://www.mediafire.com/download.php?0qgg51ttqhzjgdb

QPST Program yan install mo lang alam mo na siguro kung paano gamitin yan ^_^...na DEADS mo nga ung MODEM mo ehhh....hahaha...

1. open QPST CONFIGURATION click PORTS.
2. right click MY COMPUTER click MANAGE then DEVICE MANAGER then click ports ( COM & LPT ) hanapin mo dun kung anung PORT ung MODEM mo...
3. click ADD NEW PORT sa QPST and unCHECK show serial and USB/QC then add mo ung PORT kung saan ung MODEM mo...parang may " SURF " ung name pag tamang PORT na CLICK mo.

Step 7.

Click start clients then EFS EXPLORER click mo ung MODEM mo then OK lang....

Case Sensitive: DELETE mo ung FILES na HINDI naka FOLDER...

pag naka FOLDER wag mo iDELETE ha...

then DL mo eto http://www.mediafire.com/download.php?pbxe5oc6nok81km

Original DASHBOARD ng SmartBRO ZTE MF190 yan...

1. Extract mo then open mo ung EXTRACTED FOLDER...
2. SELECT all FILES maliban muna sa ZTEMODEM.ISO then copy mo sa EFS EXPLORER ng QPST...seconds lang copying nyan...
3. after matapos macopy ng files ung ZTEMODEM.ISO naman i copy to EFS EXPLORER ng QPST...medyo matagl yan about 5 minscguro...hehehe...depende sa utak ng PC mo...hahaha...
4. after ma COPY lahat close mo lang ung EFS EXPLORER then may lalabas jan press " YES " lang para mag restart ung MODEM mo...
5. after ma detect ung MODEM...

Case Sensitive: wag nyo muna i install ung PROGRAM / DASHBOARD ang SmartBRO...

1. UnInstall nyo muna ung MOVISTAR ng PROGRAM / DASHBOARD...
2. run CCleaner erase temp. files and repair REGISTRY...
3. OPEN mo na ung SmartBro then install PROGRAM / DASHBOARD...wait until finish installing and initializing...

Step 8.

close mo ung DASHBOARD mo at tanggalin ung MODEM...SALPAK ka na ng ibang SIM kung anung gusto mo...then SALPAK balik sa PC mo...

Case Sensitive: DONT FORGET to EDIT your " NETCONFIG " para sa APN ng CONNECTION mo...

Ex.:
GLOBE
*99***1#
http.globe.com.ph

Step 9.

kung OK na mag BROWSE ka na at mag INTERNET to sawa kana...hahaha...

TESTED BY ME 100% WORKING...sana makatulong...palapit na PASKO...

salamat sa pag BASA at PAGSUNOD...PATIENCE lang kailangan...

REFER to OTHER POST nalang wla kasing SS dami nagkalat jan memorize mo lang...hahaha...

 

[youngBoo]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

xenxa na pa ss nmn up lang mamaya.. tnx poh....

 

[rus_trizero]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

masubukan nga ito, sure kya ito bro? nadead kc zte mf190 ko sa pag oopenline eh! di na madect sa pc kahit sa qpts..

 

[conan0018]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

waiting for feedbacks...

 

[boy_dapa]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

ayos to ts! d p dead mf190 ko kaso just in case mamatay, me pag asa p mabuhay.
pa- bm muna for future use, hehe..

 

[hades19]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

salamat dito

 

[yayow0128]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

thanks pa bm muna...try ko maya....

 

[fingerpuff]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

sir !!! sun broadband kze ung mf190 ko,,, pede ko b din b ma-unlock toh gamit yan tutorial muh ????

 

[lonto08]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED

Yung sakin naman na cancel ang update hahaha ayun! hindi na gumana at hindi na umiilaw XD

 

[offspeed]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED

Yung sakin naman na cancel ang update hahaha ayun! hindi na gumana at hindi na umiilaw XD

Parehas tayo amo dina nailaw ditect siya qpst as q/qcp download mga master pa tulong naman kami....

 

[Xen T]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED

panu ung dna mdetect TS? sanhi ito nung pg update ng firmware e bgla nlng nwala

 

[nexusnex21]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

para sa mga nag try mag unlock ng smartbro zte mf190 nila na nag

" no sim "

or nag

" red light "

or na detect ng qpst na

" dead " ^_^

may pag asa na para ma buhay ulit ang modem nyo...hehehe...

Step 1.

Bago mo umpisahan ang pag buhay sa patay ^_^ uninstall mo muna lahat ng dashboard at sotwares nung ginamit mo sa pag upgrade gaya ng " etisalat " " beetel " at syempre ung sa
" smartbro"

step 2.

Run ccleaner para ma tanggal lahat ung naiwan na temp. Files at registry. http://www.filehippo.com
dito ka dl para sa latest version ng ccleaner.

Step 3.

Saksak muna ung dead zte mf190 mo... Detect - install drivers - install software - install dashboard - wait until mag initiallize at lumabas ang dashboard tapos close mo lang.

Step 4.

Dl mo eto http://www.mediafire.com/download.php?o30haa6nb02b10h

then run mo lang ung program...antayin hanggan matapos...

Ma papansin mo habang nag rurun ung program mag yeyellow ung light ng modem mo...hehehe...may progress at pag-asa na babangon mula sa kamatayan ung modem mo...

Step 5.

Pagkatapos na magrun ung program tanggalin mo ung modem then saksak mo ulet...install mo ung drivers at program / dashboard ng modem... Movistar ung bagong dashboard mo...wait until finish at mag initialize tapos close mo lang...

Step 6.

Then dl mo eto http://www.mediafire.com/download.php?0qgg51ttqhzjgdb

qpst program yan install mo lang alam mo na siguro kung paano gamitin yan ^_^...na deads mo nga ung modem mo ehhh....hahaha...

1. Open qpst configuration click ports.
2. Right click my computer click manage then device manager then click ports ( com & lpt ) hanapin mo dun kung anung port ung modem mo...
3. Click add new port sa qpst and uncheck show serial and usb/qc then add mo ung port kung saan ung modem mo...parang may " surf " ung name pag tamang port na click mo.

Step 7.

Click start clients then efs explorer click mo ung modem mo then ok lang....

Case sensitive: Delete mo ung files na hindi naka folder...

Pag naka folder wag mo idelete ha...

Then dl mo eto http://www.mediafire.com/download.php?pbxe5oc6nok81km

original dashboard ng smartbro zte mf190 yan...

1. Extract mo then open mo ung extracted folder...
2. Select all files maliban muna sa ztemodem.iso then copy mo sa efs explorer ng qpst...seconds lang copying nyan...
3. After matapos macopy ng files ung ztemodem.iso naman i copy to efs explorer ng qpst...medyo matagl yan about 5 minscguro...hehehe...depende sa utak ng pc mo...hahaha...
4. After ma copy lahat close mo lang ung efs explorer then may lalabas jan press " yes " lang para mag restart ung modem mo...
5. After ma detect ung modem...

Case sensitive: Wag nyo muna i install ung program / dashboard ang smartbro...

1. Uninstall nyo muna ung movistar ng program / dashboard...
2. Run ccleaner erase temp. Files and repair registry...
3. Open mo na ung smartbro then install program / dashboard...wait until finish installing and initializing...

Step 8.

Close mo ung dashboard mo at tanggalin ung modem...salpak ka na ng ibang sim kung anung gusto mo...then salpak balik sa pc mo...

Case sensitive: Dont forget to edit your " netconfig " para sa apn ng connection mo...

Ex.:
Globe
*99***1#
http.globe.com.ph

step 9.

Kung ok na mag browse ka na at mag internet to sawa kana...hahaha...

Tested by me 100% working...sana makatulong...palapit na pasko...

Salamat sa pag basa at pagsunod...patience lang kailangan...

Refer to other post nalang wla kasing ss dami nagkalat jan memorize mo lang...hahaha...

can you please write it down on plain english, i don't understand a lot.

Thanks bro!

 

[ybobbs]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED

kailangan sya matabunan

 

[clief]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED

Salamat dito sir BM poh

 

[cynel006]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

RIP naba talaga ang mf190 ko? d lang ma detect yung auto run pero na detect pa sa USB

 

[badtrip09]

Re: ZTE MF190 FIX after nag Firmware Upgrade " NO SIM or RED LIGHT ".

tns ts napakinabangan ko pa smartbro ko hahahaha