Re: All about Printer Problems/Questions (like regarding CISS)..Pasok..pagusapan nati
boss need help my canon ip2770 akung printer hidi ko mapasok ung service mode nia boss patulog namna pls thnx.
pag set ko ung service mode nia boss resume button lng ang umiilaw hndi nagseservice mode boss
boss..ano bang procedure na ginawa mo..?
pa post naman..
ts pahelp naman
printer: canon pixma e510
problem: paulit ulit yung paper jam error kahit wala ng papel sa loob
when: 1week ago pinaayos ko na sa service center tapos pagkuha ko knina bumalik ulit problem
boss..parang may dis-align sa loob ng printer mo...kailangan yang buksan...kailangan mo paring ipa service yan boss..
1. CANON;
2. MP287 with CISS;
3. pangit na ng print ng images. may mga lines. mga ilang beses ko ng triny ung deep cleaning. wala pa ding nagbago. tsk
4. simula nung nagkaerror. at nireset onti onting pumapanget ung print quality ng colored.
Grabe na ung pangit ng printing ng images. nagiging stripes na ang image na ipriprint. i mean, stripes na green sa bawat image.
pahelp nman po. :/
boss..try mo to..
1. hanap ka ng tissue;
2. kuha ka ng tabo
3. lagyan mo ng mainit na tubig, hangang gitna;
4. alisin mo yung cartridge mula sa printer;
5. lubog mo yung head ng cartridge sa mainit na tubig;
6. alugin mo yung head habang nakalubog yung head sa mainit na tubig;
7. alisin si cartridge mula sa tubig;
8. repeat step 5 - 7;
9. pahiran yung flex ng cartridge gamit ang tissue;
10. pahiran yung head gamit ang tissue;
11. salpak ulit sa cartridge sa printer, testing kung ok na.
note: make sure na tuyo talaga yung flex bago i salpak ulit sa printer; at wag magtaka kung marami yung lumalabas mula sa cartridge, natural lang yan.
Goodevening po mga Tropa
EPSON STYLUS t1000
http://www.epson.com.ph/resource/philippines/product/inkjet/T1100-(550-x-310).png
Naka Ciss Ink po..
Ang Problema .. Error po yung ink kahit ni reset ko na po yung reset botton sa Ciss
ang sabi Ink not recognize.. mag avail raw po ako Genuine ink..
ano po kaya ang problema? Chips ng Ciss? or Head?
boss..try mo to..
alisin si cartridge gamit yung software ni epson...alisin mo si cartridge, angat mo ( dapat mahwalay mo yung cartridge mula sa sinasalpakan nito sa pronter) tapos ibalik mo ulit si cartridge sa printer..then do the usual thing para ma maging normal yung printer mo..
pero kung wala parin..
hanap ka ng eraser..gamitan mo ng eraser yung chip ng cartridge at yung sinasalpakan ng cartridge ...
then slapak ulit si cartridge...
fb nalang kung hindi parin naayos yung problema mo..
Sir Good day
May resetter ka po ng Epson ME32, saka pano po maalis ung line sa print out ng color black pro sa colored ok naman wala silang mga line several times ko na sya pig head clean ung colored lang ata nalilinis salamat
http://www.4shared.com/rar/pDr3qawm/epson-m32-resetter.html
http://www.downloadonline.info/2013/03/18/epson-m32-resetter-free-download/
boss...wag mong sunudsunurin yung paghead clean..masisira kasi yung board ng printer mo..
ss ng external tank ng ciss mo..focus ka sa upper part at as ease kung kukunan mo ng pic..
pahelp po ts.
1. Brand name of the printer; CANON
2. Model; MP287
3. Your problem ; Pangit yung print out ng black, di buo, may linya. Nag cleaning na rin ako at deep cleaning pero ganon pa rin.
4. when and why/history before you got the problem ; nangyari after magrefill ng black ink
kasi naubusan ng black ink.
5. (for printing output problem) if possible provide screenshot of the output and the external tank of the CIS
Screenshot po ng printout
http://imageshack.us/a/img706/8378/ll5o.jpg
[url]http://img62.imageshack.us/img62/9743/0riw.jpg[/URL]
Screenshot po ng CISS tank.
[url]http://imageshack.us/a/img23/8248/b4dn.th.jpg[/URL]
[url]http://imageshack.us/a/img211/4959/vd4z.th.jpg[/URL]
Additional Info: Chineck ko yung tubes ng ciss may mga pagitan yung black ink o may hangin dun sa tubes, ng ipinacheck ko dun sa technician ng nabilhan ko ang sabi sira na daw yung cartridge kaya kailangan ng bumili ng bagong black cartridge, pero sa tingin hindi pa sira yung black cartridge gusto lang ako perahan ng buwayang yun(sana karmahin siya masyadong suwapang)
relax lang boss..hehe..malang para lang kumita sila..
try mo to.
1. hanap ka ng tissue;
2. kuha ka ng tabo
3. lagyan mo ng mainit na tubig, hangang gitna;
4. alisin mo yung cartridge mula sa printer;
5. lubog mo yung head ng cartridge sa mainit na tubig;
6. alugin mo yung head habang nakalubog yung head sa mainit na tubig;
7. alisin si cartridge mula sa tubig;
8. repeat step 5 - 7;
9. pahiran yung flex ng cartridge gamit ang tissue;
10. pahiran yung head gamit ang tissue;
11. salpak ulit sa cartridge sa printer, testing kung ok na.
note: make sure na tuyo talaga yung flex bago i salpak ulit sa printer; at wag magtaka kung marami yung lumalabas mula sa cartridge, natural lang yan.
at pakilinisan din yung air-filter nung nasa external tank ng black..
after mo gawin lahat fb nalang..
HP
2060 3in1
Naputol yung humihila sa ink. yung strip na transparent ( di ko alam tamang term)
May nabibili ba nun?
Sir pano ba baklasin yung 2060 sana may step by step procedure.
yung sa loob ba boss ng printer..?ss nalang para hindi tsyo naghuhula dito..
TS nagawa kona nga pala ung ilulubog sa mainit na tubig ung cartridge ko pero wala parin green parin ung pag print nya tapos parang low quality ung pag print kahit high quality naman!
boss..lasat option natin to..kung wala parin kailangan munang bumili ng bagong cartridge..barado talaga yung cartridge mo..
alisin mo yung cartridge mula sa printer, then, punasan mo ng maigi yung itaas nito..kung saan tayo ng rerefill ng ink (kung walang hose at external tank yung printer mo) pero kung meron dapat alisin muna natin yung hose mula sa cartridge at dapat kung aalisin mo yung hose mula sa cartridge dapat mas mababa yung external tank para hindi ka maliligo sa inkat sarado yung dalawang butas sa external tank..
tapos punasan mo ng maigi yung taas ng cartridge, at ihipan mo yung itaas ng cartridge, take note na may lalabas na ink sa head ng cartridge kaw na bahala kung paano mo pupunasan to..at ikaw nadin bahala kung ilang beses mo ii'hipan...then paki ulit yung paglubog nito sa mainit na tubig..then testing ulit...
Printer: Brother DCP-J125 (
http://www.trustedreviews.com/Brother-DCP-J125_Printer_review)
Naka CISS
Problem: Can't print. LCD screen shows error 49 (?)
When: about two weeks ago
ano pong possible solution neto? or papagawa na po ito?
boss..try mo nga to..
1. Press the Set/OK button, then Menu, then Mono Start followed by the up arrow key four times. These buttons have to be pressed independently and should be done in rapid succession. If you have done this stage right you should be presented with the word ‘maintenance’.
2. Using the Up/Down arrow keys select the number 8 and then press Set/OK. Then select the number 0 and then press Set/OK.
3. At this point we need to get in to the Purge option which, depending on the machine will either be a case of pressing Mono Start repeatedly or using the Up/Down arrow. We recommend trying one method and if it isn’t right for your machine turn the printer off and back on again, start the process from the beginning then try the second method.
4. Once PURGE is on the screen (usually the word purge will be followed by a reading indicating how much ink has been deposited) use the up/down arrows and the set/ok key again to enter the numbers 2, 7, 8 and then 3 on the screen.
5. The number after PURGE should now reset to zero. Press the Stop/Exit key to go back to the main maintenance mode menu.
6. Using the up/down and SET/OK keys enter 9 and then 9 again to exit maintenance mode.