Re: All about printer Problems, Questions (like CISS)..Pasok..pagusapan nat
try this procedure
Step 1 Click nyo yung initial settings.
Step 2
Click nyo yung "CHECK" button, then may mag pop-up na message na model number ng L120 nyo, ex: TP3K95891.
Then type nyo lang sa Product serial na box, then type nyo din sa Re-input. tapos click nyo yung "PERFORM"
May magpop-up na 2-3 messages, "YES" and "OK" lang ang i-click nyo.
"Attention!! mag EERROR talaga sa initial setting".
Then mag waste inkpad reset na kau, tapos restart nyo yung printer.
step 3 click nyo bi-d adjustment then lagay mo sa black vsd1 "16" vsd3 "12" and colored vsd1 "16" vsd3 "12"
tapos click mo ung input tapos yung finish.
Brand name of the printer; epson
2. Model; l120
3. Your problem : nag reset ako gamit ng epson ajustment tool pero after ng inizilizing ganun parin walang nag bago.
ha help
try this procedure
Step 1 Click nyo yung initial settings.
Step 2
Click nyo yung "CHECK" button, then may mag pop-up na message na model number ng L120 nyo, ex: TP3K95891.
Then type nyo lang sa Product serial na box, then type nyo din sa Re-input. tapos click nyo yung "PERFORM"
May magpop-up na 2-3 messages, "YES" and "OK" lang ang i-click nyo.
"Attention!! mag EERROR talaga sa initial setting".
Then mag waste inkpad reset na kau, tapos restart nyo yung printer.
step 3 click nyo bi-d adjustment then lagay mo sa black vsd1 "16" vsd3 "12" and colored vsd1 "16" vsd3 "12"
tapos click mo ung input tapos yung finish.