ARDUINO programming dito na kayo!!!

[deojadeandia]

tangna nkarequest ako last sem nito .hahaha bat ngayon lang 2

 

[vat13]

Mga bossing baka meron sa inyong sketch ng 2 digit counter up using push button.. pm po please.. willing pong magbayad

// Dual seven-segment LED Display with buttons
// Common Anode digit 1 pin 10
// Common Anode digit 2 pin 5

// CA1 G F A B
// | | | | | -> pins and segments they control
// --------- ---------
// | A | | A |
// F| |B F| |B
// |---G---| |---G---|
// E| |C E| |C
// | D | | D |
// --------- ---------
// | | | | | -> pins and segments they control
// D DP E C CA2

// Segments that make each number when lit:
// 0 => -FEDCBA
// 1 => ----BC-
// 2 => G-ED-BA
// 3 => G--DCBA
// 4 => GF--CB-
// 5 => GF-DC-A
// 6 => GFEDC-A
// 7 => ----CBA
// 8 => GFEDCBA
// 9 => GF-DCBA

// Arduino digital pins used to light up
// corresponding segments on the LED display
#define A 3
#define B 2
#define C 6
#define D 8
#define E 7
#define F_SEG 4
#define G 5

// Pushbuttons connected to pins 9 and 10
#define BTN1 9
#define BTN2 10

// Pins driving common anodes
#define CA1 13
#define CA2 12

// Pins for A B C D E F G, in sequence
const int segs[7] = { A, B, C, D, E, F_SEG, G };

// Segments that make each number
const byte numbers[10] = { 0b1000000, 0b1111001, 0b0100100, 0b0110000, 0b0011001, 0b0010010,
0b0000010, 0b1111000, 0b0000000, 0b0010000 };

int digit1 = 0;
int digit2 = 0;

void setup() {
pinMode(A, OUTPUT);
pinMode(B, OUTPUT);
pinMode(C, OUTPUT);
pinMode(D, OUTPUT);
pinMode(E, OUTPUT);
pinMode(F_SEG, OUTPUT);
pinMode(G, OUTPUT);
pinMode(BTN1, INPUT);
pinMode(BTN2, INPUT);
pinMode(CA1, OUTPUT);
pinMode(CA2, OUTPUT);
}

void loop() {

// check button1
int val1 = digitalRead(BTN1);
if (val1 == HIGH) {
digit1++;
digit1 %= 10;
delay(10);
}

// check button2
int val2 = digitalRead(BTN2);
if (val2 == HIGH) {
digit2++;
digit2 %= 10;
delay(10);
}

// display number
unsigned long startTime = millis();
for (unsigned long elapsed=0; elapsed < 600; elapsed = millis() - startTime) {
lightDigit1(numbers[digit1]);
delay(5);
lightDigit2(numbers[digit2]);
delay(5);
}
}

void lightDigit1(byte number) {
digitalWrite(CA1, LOW);
digitalWrite(CA2, HIGH);
lightSegments(number);
}

void lightDigit2(byte number) {
digitalWrite(CA1, HIGH);
digitalWrite(CA2, LOW);
lightSegments(number);
}

void lightSegments(byte number) {
for (int i = 0; i < 7; i++) {
int bit = bitRead(number, i);
digitalWrite(segs, bit);
}
}

 

[danjen]

mga ka-symbianize, help naman hehe kahit onting code lang about object follower, assuming may dalawang motor at 3 sensors, (car shaped yung project) yung 2 sensor sa harap nkalagay, den susundan nya yung madedetect nya, tapos yun isa pang sensor nkatutok nman sa taas, kapag may nadetect yung 3rd sensor, iiwas cya.
pahelp nmn po, project ng kapatid ko. salamat

 

[homaande]

kuya pwd po ako pahelp assignment po kasi nmin pwde po ako humingi ng code of any song using the arduino with speaker slamt po sa help

 

[wakokohekhek]

Arduino ay controller device siya. Ang arduino gawa siya sa turbo c#. Kung gsto mo mas malupit na idea. Sa taft avenue. Andun store nila. Pwede ka magtanong.

 

[xPeke012]

gawa tayo group sa fb. may konting alam ako. bka makatulong ako

 

[wakokohekhek]

TITLE ng thesis namin dati using ARDUINO is WEB BASED HOME AUTOMATION USING ARDUINO CONTROLLER.
lights and security. sayang di naman natapos to kasi sobrang gastos lang talga. mahal kasi device. tapos astig to
pag niproposed niyo as thesis. naka line agad kami sa best thesis. hahaha kaya lang sad di naman naituloy. no money na eh
para sa mga device na gagamitin namin.

 

[yhanlhee]

patulong po sa vending machine namin using arduino, 2 coin acceptor with 1 arduino... ung coin acceptor1 which is test booklets ung ididispnse niya(1 booklet = 5 pesos) pero ito inaacept niya 1 peso coin, pero dapat iexact niyang 5 pesos ung iinsert niya. coin acceptor 1 accepts 1, 5, and 10 peso coin same thing with coin acceptor2 (1 bond paper = 1 peso coin) so itong coin acceptor2 is pwede sa kahit anung value ng coin(exept cents)... salmat sa tutulong..

 

[malevolent16]

paano po ba gamitin yung multi tab ng arduino ide? para maorganize yung code.

 

[Android 20]

patulong po sa vending machine namin using arduino, 2 coin acceptor with 1 arduino... ung coin acceptor1 which is test booklets ung ididispnse niya(1 booklet = 5 pesos) pero ito inaacept niya 1 peso coin, pero dapat iexact niyang 5 pesos ung iinsert niya. coin acceptor 1 accepts 1, 5, and 10 peso coin same thing with coin acceptor2 (1 bond paper = 1 peso coin) so itong coin acceptor2 is pwede sa kahit anung value ng coin(exept cents)... salmat sa tutulong..

dalawang coin acceptor ??? bakit hindi nalang isang coin acceptor tapos merong dalawang push button para sa bondpaper at sa booklet???

 

[kingki2]

wow meron na plang ganito? hehehe geh basa lang ako... gusto ko din matutunan to nakita ko pd xa sa mga edrums etc.

 

[louin]

thesis namin arduino flight controller. wala na yata pagasang pumasa

 

[LeeYoh]

hello po mga sir/mam
baka po may makatulong sakin sa thesis sa pagcodes using PIR tska thermal sensor po kasi ung thesis ko.. sana po may makapansin papm po ako marami pong salamat

 

[pclogger]

up up up ..........

 

[Iyazen]

baka po may marunong dito nung water flow sensor + ethernet shield sa arduino. di ko po kasi makuha pero kapag water flow sensor+ arduino lang okay naman po. salamat po sa sasagot

 

[king09zeuz]

goodevening mga sir.. meron po ba kau n alam n seminar/training s arduino or raspiberry, TIA.

 

[dadiming]

pa tambay po dito ts..

 

[mtouch]

sino dto nka barebone na 328p

 

[bolasa]

sino po may alam kung pano e program ang arduino pra mka access sya sa isang database?

use pin 0-RX and 1-TX of arduino to connect through serial port... kaylangan mo ng ttl converter....kung VB.net gmit mo add ka lng serialport component...

 

[CodingSource]

Okay ito. Try niyo rin ang "Raspberry" hehe.