B593s-931 169.254.x.x ip FIX

[at0m]

Before we begin...set your lan to static...192.168.1.2,then its default subnet mask

do the telnet command...telnet 192.168.1.1...enter

BusyBox vv1.9.1 (2014-11-03 0901 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# lteat

First confirm, that it is in the equipment mode:

AAT^nvrd=52110
^@
^NVRD: 12,31 00 00 00 00 00 00 00 00 00 00 00


To change equipment mode back to normal

AAT^nvwr=52110,1,0

To confirm if its rewrited

AAT^nvrd=52110

^NVRD: 12,00 00 00 00 00 00 00 00 00 00 00 00

restart your modem...back to its default ip...hope it helps


credit goes who started AT commands...you know who are they...thanks to them....its up to you guys to continue what has begun

Some discovered AT cmd`s for B593s-931(standby for further additional usefull AT cmd)

AAT^CARDLOCK?=(3,0,0 for the result w/c is a permanent lock)i have tried all possible at cmd`s for unlocking,
(AAT^CARDLOCK="xxxxxxxx",AAT^CARDUNLOCK="hash reset counter",AAT^SIMLOCK,AAT^SIMUNLOCK,
AAT^DATALOCK,AAT^DATAUNLOCK....etc..etc)still no luck...but...there`s still a way,nvram id for the cardlock.
Like equipment mode to normal operation wc is located at 52110(like what i`ve posted above)or maybe it is in
52111,or in 8250.A long way to start from 0-65535(nvram read,AAT^NVRD=?)those who are interested for the
discovery....pls feel free to post......ty

AAT^WUUSER?=admin username
AAT^WUPWD?=admin password
AAT^NVRD=?
AAT^NVWR=?

 

[L.cloyd10]

Before we begin...set your lan to static...192.168.1.2,then its default subnet mask

do the telnet command...telnet 192.168.1.1...enter

BusyBox vv1.9.1 (2014-11-03 0901 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

Dumami na mga masters sa at commands..
# lteat

First confirm, that it is in the equipment mode:

AAT^nvrd=52110
^@
^NVRD: 12,31 00 00 00 00 00 00 00 00 00 00 00


To change equipment mode back to normal

AAT^nvwr=52110,1,0

To confirm if its rewrited

AAT^nvrd=52110

^NVRD: 12,00 00 00 00 00 00 00 00 00 00 00 00

restart your modem...back to its default ip...hope it helps


credit goes who started AT commands...you know who are they...thanks to them....its up to you guys to continue what has begun

Dumami na mga masters sa At commands. ako eto nag aaral prin haha

 

[gibo19781]

wala na yung brick ko eh...cno na naka testing neto? na unbrick ba sa equipment mode..???

 

[devzdust]

Before we begin...set your lan to static...192.168.1.2,then its default subnet mask

do the telnet command...telnet 192.168.1.1...enter

BusyBox vv1.9.1 (2014-11-03 0901 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# lteat

First confirm, that it is in the equipment mode:

AAT^nvrd=52110
^@
^NVRD: 12,31 00 00 00 00 00 00 00 00 00 00 00


To change equipment mode back to normal

AAT^nvwr=52110,1,0

To confirm if its rewrited

AAT^nvrd=52110

^NVRD: 12,00 00 00 00 00 00 00 00 00 00 00 00

restart your modem...back to its default ip...hope it helps


credit goes who started AT commands...you know who are they...thanks to them....its up to you guys to continue what has begun

boss maraming salamat dito

 

[marktattoo]

Before we begin...set your lan to static...192.168.1.2,then its default subnet mask

do the telnet command...telnet 192.168.1.1...enter

BusyBox vv1.9.1 (2014-11-03 0901 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# lteat

First confirm, that it is in the equipment mode:

AAT^nvrd=52110
^@
^NVRD: 12,31 00 00 00 00 00 00 00 00 00 00 00


To change equipment mode back to normal

AAT^nvwr=52110,1,0

To confirm if its rewrited

AAT^nvrd=52110

^NVRD: 12,00 00 00 00 00 00 00 00 00 00 00 00

restart your modem...back to its default ip...hope it helps


credit goes who started AT commands...you know who are they...thanks to them....its up to you guys to continue what has begun

nisemi brick ko pa modem ko matest lang to ayos working

 

[a4tech1964]

pwede ba to sa hindi equipment mode?sakin kasi hindi equipmed mode pero 169

 

[ranzhie07]

firmware ng tae meron po?

http://www.symbianize.com/showthread.php?t=1350910

 

[at0m]

up...for the help

 

[tiancris]

you can visit
http://www.symbianize.com/showthread.php?t=1344489

isa po ako sa ng try ito. and ngaun working na siya.

 

[cokefloat]

sa s22 na nakatambak dahil sa maling HEX EDIT nuong ilang taon na nakakaraan, nag flash ng Multicast tapos bricked na POWER ON nalang at 169 ip?

 

[at0m]

if we only know nvram entry for the cardlock...we can unlock our modem

 

[LHONGZKIE]

sana may spoon feed para mas madali makuha withh tung tut....

hina kasi ako sa telnet at at command

tagal na kasi nganga etong 931 ko nadali after nireset....

 

[freddy3k]

if we only know nvram entry for the cardlock...we can unlock our modem

i already post universal direct unlock via AT command.. same as 936 lang yan as long you can access the nvram by disabling the spoolprof watchdog fuse bit

 

[marktattoo]

Sana may magmagandang loob na mag post ng tutorial para maunlock na 931

 

[at0m]

i already post universal direct unlock via AT command.. same as 936 lang yan as long you can access the nvram by disabling the spoolprof watchdog fuse bit

my reference--> at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0----error on 931
AAT^NVRD=8268
result=^NVRD: 12,01 00 00 00 02 00 00 00 0A 00 00 00
test=AAT^NVWR=8268,12,1,0,0,0,2,0,0,0, a, 0,0,0----it enters without error...but w/c of w/c..ha ha

 

[freddy3k]

my reference--> at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0----error on 931
AAT^NVRD=8268
result=^NVRD: 12,01 00 00 00 02 00 00 00 0A 00 00 00
test=AAT^NVWR=8268,12,1,0,0,0,2,0,0,0, a, 0,0,0----it enters without error...but w/c of w/c..ha ha

as i said

disabling the spoolprof watchdog fuse bit FIRST

bago mo isalpak yang code nang unlock

 

[marktattoo]

as i said



bago mo isalpak yang code nang unlock

Alam mo ba pano gawin ung boss ?

 

[freddy3k]

Alam mo ba pano gawin ung boss ?

ang tanong alam mo ba kung ano ang

spoolprof watchdog fuse bit ?

 

[at0m]

they are also after on unlocking modems---> http://forum.ru-board.com/topic.cgi?forum=27&topic=21791&start=1500 a russian website

 

[marktattoo]

ang tanong alam mo ba kung ano ang

spoolprof watchdog fuse bit ?

Ikaw alam mo pano idisable?