Bm622m config problem solution here!!!!

mikelynnie · Jul 12, 2014

maraming salamat sa tut sir,,,malaking bagay po to,,sa wakas,,keep up the good work sir... :clap:

markista · Jul 13, 2014

ask ko lng po panu kung hindi naka open ung telnet my solution pa puba sa bm622m ung bagong model d ko kc ma open ung telnet nya my nabasa akong d2 sa SB na thread kaso nung nagwa ko na check ko ung telnet pero bilis nyang mag disable bakit ganun panu po gagwin ko

abidrei · Jul 13, 2014

mikelynnie said:
maraming salamat sa tut sir,,,malaking bagay po to,,sa wakas,,keep up the good work sir...

po!

markista said:
ask ko lng po panu kung hindi naka open ung telnet my solution pa puba sa bm622m ung bagong model d ko kc ma open ung telnet nya my nabasa akong d2 sa SB na thread kaso nung nagwa ko na check ko ung telnet pero bilis nyang mag disable bakit ganun panu po gagwin ko

sir downgrade mo ang unit mo to 2012 para hindi ka na mamroblema. Search the keyword "winspreader" yan ang makakatulong sayo.

dreamer012 · Jul 13, 2014

Re: Bm622m Config Problem Solution Here!!

pa try nito ts thanks

- - - Updated - - -

nice thread gumana nawla na vintage at mabilis na mag connect bm622m ko hindi na kalas kabit antenna ko :thumbsup:

abidrei · Jul 14, 2014

Re: Bm622m Config Problem Solution Here!!

dreamer012 said:
pa try nito ts thanks

- - - Updated - - -

nice thread gumana nawla na vintage at mabilis na mag connect bm622m ko hindi na kalas kabit antenna ko

po!

dreamer012 · Jul 14, 2014

Re: Bm622m Config Problem Solution Here!!

para kay ts up ito sa mga naghahanap ng solusyon :salute:

abidrei · Jul 15, 2014

Re: Bm622m Config Problem Solution Here!!

dreamer012 said:
para kay ts up ito sa mga naghahanap ng solusyon

Salamat po sa bump!

Genesispogi · Jul 15, 2014

Re: Bm622m Config Problem Solution Here!!

ok talaga to...eto lagi ginagamit ko kapag may problema ung 22m ko

kejay · Jul 15, 2014

ok to sir ahh....

big69 · Jul 15, 2014

X 3 ko na nagamit ito...... talagang effective para sa vintage issue......... salamat po ulit sa inyo TS

intella · Jul 16, 2014

abidrei said:

Paki run na lang po yung script after nyo maedit yung mga dapat iedit (yung mga naka red fonts). Ang purpose po nito ay burahin ang current config file ng bm622m nyo at i-load ang default config nito. Advisable po ito sa mga bm622m na nagsstuck yung Wimax Led, yung bang full bar pa rin kahit na disconnect na ang Mac at yung mga Vintage Problem kayang kaya rin nito. Yung mga bm622m na hindi magamit sa sniping dahil hindi nagcoconnect or hindi nag-iiba yung mac masusulusyonan din nito.

Code:

Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"color a"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"telnet 192.168.254.1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"Firefly"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"$P4mb1h1r4N4m4nT0!!"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"cd /etc"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"rm default.cfg"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset pw_static_model 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_ETH_PORT_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LEDBUTTON_TIMER_INTERVAL 125"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset VOIP_CH_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset SLIC_TYPE 321760"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_MAP 0,-1,2,15,24,12,11,25,10,-1,-1,-1,-1,-1,13,14"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_INVERSION 32772,0"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_SERVER_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_CLIENT_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL 3600"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC_ENCRY [COLOR="#FF0000"]346BDXXXXXX[/COLOR]"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC [COLOR="#FF0000"]34:6B:D3:XX:XX:XX[/COLOR]"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_MAC [COLOR="#FF0000"]34:6B:D3:XX:XX:XY[/COLOR]"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WMX_FREQ_LIST 2507500,2602000,2612000,2622000,2638000,2505000,2510000"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg reload"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"/factoryreset.sh"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

I-copy nyo lang po sa notepad at i-save ng .vbs para sa hindi alam gumawa ng script.

sir panu po ilagy yan script pa tut nmn po...salamat

abidrei · Jul 16, 2014

big69 said:
X 3 ko na nagamit ito...... talagang effective para sa vintage issue......... salamat po ulit sa inyo TS

walang anuman sir

intella said:
sir panu po ilagy yan script pa tut nmn po...salamat

nirurun po yan try mo po muna mag research about wimax kase not for newbie yan try reading about telnet both of pc and your modem, and other details about bm622m. start here http://www.symbianize.com/showthread.php?t=1046818

diamondevolution · Jul 19, 2014

View attachment 177522

bakit ganto?

knarfhackz · Jul 19, 2014

Re: Bm622m Config Problem Solution Here!!

maraming thank you sir okay na bm622m q kala q wla na paraan buti nabasa q to......salamat nagamot na vintage q more power sir....

elvinabella · Jul 19, 2014

thanks po dito...

abidrei · Jul 20, 2014

diamondevolution said:
View attachment 943767

bakit ganto?

ano problema sir? ok naman yan ah.. kaya lumabas "connection to host lost" kase magrereboot ang modem mo after ng script then kapag connected ang mac na nilagay mo ok na yan...

knarfhackz said:
maraming thank you sir okay na bm622m q kala q wla na paraan buti nabasa q to......salamat nagamot na vintage q more power sir....

elvinabella said:
thanks po dito...

po mga ka-SB!

jleonard · Jul 20, 2014

sir help naman after ko to nagamit sa 622m ko ayaw na magchange ng mac,pero ung vintage ay ok na

shnlord · Jul 21, 2014

Re: Bm622m Config Problem Solution Here!!

TS maraming salamat sayo ...........

fukuda · Jul 21, 2014

Re: Bm622m Config Problem Solution Here!!

bm muna for future ref.. :salute:

YHANIEQOH · Jul 21, 2014

abidrei said:

Paki run na lang po yung script after nyo maedit yung mga dapat iedit (yung mga naka red fonts). Ang purpose po nito ay burahin ang current config file ng bm622m nyo at i-load ang default config nito. Advisable po ito sa mga bm622m na nagsstuck yung Wimax Led, yung bang full bar pa rin kahit na disconnect na ang Mac at yung mga Vintage Problem kayang kaya rin nito. Yung mga bm622m na hindi magamit sa sniping dahil hindi nagcoconnect or hindi nag-iiba yung mac masusulusyonan din nito.

Code:

Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"color a"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"telnet 192.168.254.1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"Firefly"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"$P4mb1h1r4N4m4nT0!!"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"cd /etc"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"rm default.cfg"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset pw_static_model 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_ETH_PORT_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LEDBUTTON_TIMER_INTERVAL 125"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset VOIP_CH_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset SLIC_TYPE 321760"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_MAP 0,-1,2,15,24,12,11,25,10,-1,-1,-1,-1,-1,13,14"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_INVERSION 32772,0"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_SERVER_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_CLIENT_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL 3600"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC_ENCRY [COLOR="#FF0000"]346BDXXXXXX[/COLOR]"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC [COLOR="#FF0000"]34:6B:D3:XX:XX:XX[/COLOR]"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_MAC [COLOR="#FF0000"]34:6B:D3:XX:XX:XY[/COLOR]"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WMX_FREQ_LIST 2507500,2602000,2612000,2622000,2638000,2505000,2510000"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg reload"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"/factoryreset.sh"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

I-copy nyo lang po sa notepad at i-save ng .vbs para sa hindi alam gumawa ng script.

sir merun din po ba kayo para sa bm622 and bm622i?? pa pm naman po!! thanx in advance ganun din kac nangyare sa bm622 and bm622i ko ehh

Bm622m config problem solution here!!!!

Recruit

Amateur

The Patriot

Proficient

The Patriot

Proficient

The Patriot

The Loyalist

The Patriot

Apprentice

Amateur

The Patriot

Novice

Attachments

Apprentice

The Fanatic

The Patriot

Apprentice

Apprentice

Novice

Recruit

Similar threads