Hirap ba kayong mg.snipe ng bm622m macs? No problem, eto na ang tool pra sa inyo mga ka.SB!
s.s.
View attachment 151512
Instruction:
-you can use any globe wimax device for sniping...
-identify first the wan ip of your globe wimax device
-how? login using browser, under status, click WAN, and get the WAN IP
-for example your WAN IP is 10.10.10.26, then you can put in the mac sniper program under 'FROM = 10.10.10.1 and in the 'TO = 10.10.10.255 and then click START button.
-wait and it will show the mac address if it can found 1 or more in WAN MAC list.
-only the bm622m macs will be sniped!
Download link : https://hostr.co/uc5hUXwee4vy
mediafire link : https://www.mediafire.com/?33mw8yezcrbh3ae
Feel free to download and give feedbacks for bugs...
Note: Enable first your telnet client. how? click this -> http://www.symbianize.com/showthread.php?t=1111450
MSWINSCK error :
View attachment 151514
download this -> https://hostr.co/s0JVPOcKaP6O
-right click "reg.bat" and select run as administrator
ERROR Registering winsock control?
View attachment 151531
Solution:
-Extract the file in mswinsck.zip to any directory. In my case, i put it to "D:\temp"
-Click Start->All Programs->Accessories
-Right click on "Command Prompt" and select "Run as Administrator"
-Type "D:" without quotation and press enter
-Type "cd temp" without quotation and press enter
-Type "reg.bat" without quotation and press enter
-It will promt that registration succeeded.
-You can now open the mac sniper without error!
s.s.
View attachment 151512
Instruction:
-you can use any globe wimax device for sniping...
-identify first the wan ip of your globe wimax device
-how? login using browser, under status, click WAN, and get the WAN IP
-for example your WAN IP is 10.10.10.26, then you can put in the mac sniper program under 'FROM = 10.10.10.1 and in the 'TO = 10.10.10.255 and then click START button.
-wait and it will show the mac address if it can found 1 or more in WAN MAC list.
-only the bm622m macs will be sniped!
Download link : https://hostr.co/uc5hUXwee4vy
mediafire link : https://www.mediafire.com/?33mw8yezcrbh3ae
Feel free to download and give feedbacks for bugs...
Note: Enable first your telnet client. how? click this -> http://www.symbianize.com/showthread.php?t=1111450
MSWINSCK error :
View attachment 151514
download this -> https://hostr.co/s0JVPOcKaP6O
-right click "reg.bat" and select run as administrator
ERROR Registering winsock control?
View attachment 151531
Solution:
-Extract the file in mswinsck.zip to any directory. In my case, i put it to "D:\temp"
-Click Start->All Programs->Accessories
-Right click on "Command Prompt" and select "Run as Administrator"
-Type "D:" without quotation and press enter
-Type "cd temp" without quotation and press enter
-Type "reg.bat" without quotation and press enter
-It will promt that registration succeeded.
-You can now open the mac sniper without error!
Attachments
Last edited: