Cherry mobile fusion aura flashing

[ulrick08]

hindi... kinalikot ko yung flex ng screen... kapag binuksan mo yung likod makikita mo yun... ayun yung nasa upper left corner ng tab... ang opposite nya eh camera lens naman... dun ka lang magfocus... nung tinanggal ko kasi yun sabay binalik ko pero di ko nilock gumalaw yung screen kaya ginawa ko ginalaw ko ng ginalaw hanggang makuha ko yung tamang pyesto nya na gumagana yung screen... dont worry to fail pre... kasi mura lang naman pala screen mga 250 or 350 lang sa baclaran mall.. tawag sa screen eh digitizer... kaw na lang magpakabit kapag di mo na talaga kaya

 

[zilfer23]

hindi... kinalikot ko yung flex ng screen... kapag binuksan mo yung likod makikita mo yun... ayun yung nasa upper left corner ng tab... ang opposite nya eh camera lens naman... dun ka lang magfocus... nung tinanggal ko kasi yun sabay binalik ko pero di ko nilock gumalaw yung screen kaya ginawa ko ginalaw ko ng ginalaw hanggang makuha ko yung tamang pyesto nya na gumagana yung screen... dont worry to fail pre... kasi mura lang naman pala screen mga 250 or 350 lang sa baclaran mall.. tawag sa screen eh digitizer... kaw na lang magpakabit kapag di mo na talaga kaya

panu po ba buksan ung aura? 2 fusion aura kasi sa amin ganito problema, khapon lng sabay d gumana screen. ilang araw pa lng nakalipas ng bilhin sira na agad.

 

[kennconsuelo]

kuya TS.. success naman flashing ko kaso pagkareboot nya at napunta na sa first time boot.. yung touch screen ndi gumagana..

naka 10 flash na ako..

may solution ka po ba sa touch screen problem ng CM fusion aura ko.?

salamat po.!

okey naman saken eh,..

phoenix suit lang dapat gamit,..

 

[svendjay1]

okey naman saken eh,..

phoenix suit lang dapat gamit,..

bakit po pa ulit2x lang siya mag found new hardware d sya ma read ng phoenix pa help naman po

 

[kaener]

talaga pa lang my error sa bagong labas ng cherry mobile na yan.ganya din prob. ng akin ayaw ma touch ung screen.

 

[belbecake]

http://www.4shared.com/rar/btfqRaiace/Fusion_Aura.html

http://www.4shared.com/rar/WFlZZhK1ce/phoenix_suit_108.html?locale=en

1. Open Phoenix suite,click on firmware,select image,then click upgrade..

2. Press and hold volume up,insert USB cable,then press power about ten times.

3. Wait till flashing is done..

4. after flashing is done,a message will pop up,just click ok

then wait till the unit reboots itself

say thanks na lang okey na

sir paano ko ba madadownload itong fusion aura, ACCESS DENIED ako sa 4shared, baka meron kang ibang link na hindi 4shared...plsss lang tol nid ko lang nito may tanggap kasi ako, tnx po

 

[shaiken17]

http://www.4shared.com/rar/btfqRaiace/Fusion_Aura.html

http://www.4shared.com/rar/WFlZZhK1ce/phoenix_suit_108.html?locale=en

1. Open Phoenix suite,click on firmware,select image,then click upgrade..

2. Press and hold volume up,insert USB cable,then press power about ten times.

3. Wait till flashing is done..

4. after flashing is done,a message will pop up,just click ok

then wait till the unit reboots itself

say thanks na lang okey na

1000000000000000000%%%%%%%%%%%%%%%%%% working po boss. thanks po ng marami

 

[kemekem]

Re: Fusion aura touchscreen problem help

hindi ko matouch yung touch screen, gumagana pa xa at nagchacharge pero hindi xa gumagana kapag itouch ive trieeseting it, hard reset etc but it still won't work help....

ganyan din po skin . nagloloko na lahat. Kaya nag palit nlng ako ng cp hehehee

 

[jjzigen]

mga sirs, baka may latest version kau ng firmware ng fusion aura? 05.14.2014 ata un.

 

[gl3nborj]

hu hu, non working na yung link.

 

[zeonhelper]

http://www.4shared.com/rar/btfqRaiace/Fusion_Aura.html

http://www.4shared.com/rar/WFlZZhK1ce/phoenix_suit_108.html?locale=en

1. Open Phoenix suite,click on firmware,select image,then click upgrade..

2. Press and hold volume up,insert USB cable,then press power about ten times.

3. Wait till flashing is done..

4. after flashing is done,a message will pop up,just click ok

then wait till the unit reboots itself

say thanks na lang okey na

Boss broken link po and download page po please po paki update

 

[gl3nborj]

Salamat TS, gumagana sakin, Phoenix Suit v1.10, windows 10 pro 64 bit

 

[Yoki]

ts close muna natin ang thread, paki open nalang once updated na ang mga link sa first page