This is for those Hypers that are really messed up that you can't fix with just recovery mode because you messed up the software of your phone and the only thing you can access is the Bootloader ([####] Fastboot Bootloader...). Or maybe it just died by itself and somehow, only the software was broken.
WARNING: PLEASE READ CAREFULLY AND PATIENTLY AS THIS PROCESS COULD BE RIDICULOUSLY HARD AND/OR LONG DEPENDING ON THE LEVEL OF THE KNOWLEDGE OF THE READER, AND THE SIZE OF THE TEXT OF THIS TUTORIAL IS VERY SMALL COMPARED TO THE IMAGES AND WILL BE EASILY OVERLOOKED. SO PLEASE RELAX AND GIVE IT SOME TIME.
Note: It's not for sure that this method will actually fix your phone, but since your phone is already messed up anyway, and fastboot is your only way to revive it now (other than the service center, or so i think it is), there is no danger anymore in trying. Or at least that's what I think.
Assuming you haven't installed Fastboot and Drivers yet, just follow the steps and we will continue with the reviving.
ADB and FASTBOOT Files:
http://www.mediafire.com/?vl2pzpvb41er2xa
Hyper Drivers:
http://www.mediafire.com/?m9g6gne0e4m1c9x
Alternative Hyper Drivers:
- for XP SP3 to Windows8
- 32bit and 64bit
http://www.mediafire.com/download/1hyamu10zxa040q/CM-Hyper+PCdrivers.zip
Step 1.) Download the Fastboot from below and extract it to C:\Android\Tools
http://www.mediafire.com/?vl2pzpvb41er2xa
Screenshot 1:
http://goo.gl/ROqoeq
Step 2.) Download the Drivers from below and extract it to C:\Android\Drivers
http://www.mediafire.com/?m9g6gne0e4m1c9x
Screenshot 2:
http://goo.gl/Po53tj
Step 3.) Connect your Hyper while on Bootloader (Turned on while pressing volume Up). Your PC will try to install a new device. Double click the icon and click that Skip obtaining driver software from Windows Update. Then wait for it to succeed or fail. If you have tried/done this before, skip to Step 4.
Screenshot 3:
http://goo.gl/tIfJFK
Screenshot 4:
http://goo.gl/9qw6eq
Step 4.) Then go to Device Manager and right click on the not-installed device and click Update Driver Software and choose Browse my computer for driver software. Browse to the folder where you extracted the drivers and click next. If it says Windows can't verify the publisher, click Install this driver software anyway and sing ABCD until it finishes installing.
Screenshot 5:
http://goo.gl/TzQUgl
Screenshot 6:
http://goo.gl/4Dhx8G
Screenshot 7:
http://goo.gl/JTxpDW
Screenshot 8:
http://goo.gl/YTdOWy
Screenshot 9:
http://goo.gl/KQnBOe
Step 5.) Set up the environment variables.
For Windows XP,
1.) Right click on My Computer, and then click Properties.
Screenshot 10:
http://goo.gl/phX2Qr
2.) Click the Advanced tab. Then, click Environment variables.
Screenshot 11:
http://goo.gl/f1TFsk
3.) On the User Variables, click New. On the Variable name, write 'PATH'. On the Variable value, write the path to where you extracted the tools, ex. C:\Android\Tools
Screenshot 12:
http://goo.gl/TjQ6Bx
4.) Click OK and your done.
For Windows 7,
1.) Right click on Computer, and then click Properties.
Screenshot 13:
http://goo.gl/phX2Qr
2.) Click Advanced system settings.
Screenshot 14:
http://goo.gl/llhxIa
3.) Click the Advanced tab. Then, click Environment variables.
Screenshot 15:
http://goo.gl/f1TFsk
4.) On the User Variables, click New. On the Variable name, write 'PATH'. On the Variable value, write the path to where you extracted the tools, ex. C:\Android\Tools
Screenshot 16:
http://goo.gl/TjQ6Bx
5.) Click OK and your done.
Reviving Hyper By Means Of FASTBOOT
Assuming you have already installed fastboot and drivers, continue on. If not, please read above.
Step 1.) Download a boot, a recovery, and a system that is appropriate for your Hyper from below.
********************************************************************************
Version v19
=========
Note:
-Flashable on Stock Recovery and TWRP
-Flashing intrucstions can be found below.
SYSTEM IMG v19
http://www.mediafire.com/?9bb1ss431a74p7w
BOOT IMG v19
http://www.mediafire.com/?2p5p5macde8r1s4
=========
=========
Version v15
=========
Note:
-Flashable on Stock Recovery and TWRP
-Flashing intrucstions can be found below.
-This System dump has a modded Google Play Store, you can replace it from the link below.
SYSTEM IMG v15
http://www.mediafire.com/?8e3rbmqncpeyk2q
Google Play Store
http://www.facebook.com/groups/CherrymobileHyper/doc/157142454478598/
BOOT IMG v15(7-16-2013)
http://www.mediafire.com/?wmbtqr1jgt7392c
==============
==============
Inverted Screen Fix
==============
Inverted Screen Fix for V19
http://www.mediafire.com/?e868b5i27zben4i
Note:
-Use this only if your screen became inverted after flashing SYSTEM IMG V19
-Flashable on Stock Recovery and TWRP
-Flashing intrucstions can be found below.
========
========
mmcblkp20
========
mmcblkp20 file
http://www.mediafire.com/?uhp0qfd2mo6qqav
Note:
-Use this only if you flashed a splash.img or a rom from CM Flare.
-Pair this with system img and boot img of your phone.
-Flashable on Stock Recovery and TWRP
-Flashing intrucstions can be found below.
===========
===========
RECOVERY IMG
===========
Info:
This is the RECOVERY.IMG of your HYPER, no need to flash this, unless you are on a custom recovery and want to revert back to stock recovery or you have a defective stock recovery.
RECOVERY IMG
http://www.mediafire.com/?62h9876nmn257n4
Note:
-Do not perform "Wipe Data/Factory Reset"
-Flashable on Stock Recovery and TWRP
-Flashing intrucstions can be found below.
Flashing RECOVERY IMG on Terminal Emulator:
1. Extract recovery.img and place it on your external sdcard
2. Open Terminal Emulator and type this
commands:
su [ENTER]
dd if=/mnt/sdcard/recovery.img of=/dev/block/mmcblk0p16 [ENTER]
reboot recovery [ENTER]
Note:
[ENTER] = Enter key on your keyboard.
**************************************************************************
Step 2.) Extract each zip. Each zip will have a .img file inside. Since we only need those, extract only those files. Put them in C:\Android\Tools
Screenshot 17:
http://goo.gl/zNGzM4
Step 3.) While your Hyper is on bootloader (Turned on while pressing volume Up), in the command prompt, type the following in order.
fastboot -i 0xd324 flash boot boot.img
fastboot -i 0xd324 flash recovery recovery.img
fastboot -i 0xd324 -w flash system system.img
Screenshot 18:
http://goo.gl/ExP3FX
(Supposedly, you would not need to include the full path if you extracted the .img files in C:\)
And we're done!
If it doesn't work, then its really time to go to the Service Center. If they say they can't fix it, then test how far you can throw a CM Hyper into the sea.
Credits to Hyper FB Groups
