CM FLARE..deadboot >>>QpST restart solution!! COMPILATION

[yuridrew]

CREDITS AND salamat sa original threader nito!!!!!!!!!!!!!!!

GUSTO KO LANG MAKATULONG!!!!!!!!!! BECAUSE I experience the same kind of problem recently

QPST PROBLEM CM FLARE SOLUTION

follow lang po ninyo ung steps na yan ayan din po ung ginawa ko sa flare ko ung na deadboot po xia pde din po yan sa hard brick as long as na dedetect pa xia nang computer


Follow this guide carefully and you can revive your dead Karbonn A9+/ CM Flare after Jelly Bean Upgrade.

Tools Needed:

Dead Phone (When u connect to PC it should install Qualcomm HS-USB QD Loader 9008 Driver) http://www.mediafire.com/download/pba9wajnehr9qwg/Qualcomm+USB+Drivers.rar
QPST.2.7.399 http://www.mediafire.com/download/iq7de51esjl6yja/QPST-2.7.399.rar
Flare Revival kit Link http://www.mediafire.com/download/29q1dg6a2x91gyi/FlareRevival.rar
PC with 32 bit Windows (XP/Vista/7/8) (64bit casus problem in QPST installation)

Connect ur phone to PC and let the driver install
Install QPST

Open QPST Configuration (in Win XP compatibility mode) ->Add new port -> Select the com port of your device ->exit.

Go to Start -> All Programs -> QPST eMMC Software Download open the tool -> Check program boot loaders -> Browse for the device com port

Extract Flare Revival Kit on desktop
If Phone is not detected , Click Browse

In flash programmer file name type MPRG8X25.hex -> in Boot Image type 8X25_msimage.mbn in SPC ->000000

Click Load XML def and browse for rawprogram0.xml in Flare Revival Kit

Click Load Patch def and browse for patch0.xml

Check the search path 2 and browse for the folder flare repair files

Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver

ALTERNATIVE PROCEDURE


Solution For Deadboot


Download first this Files bago tayu mag simula

QPST 2.7 build 399 -
http://www.mediafire.com/download/8f5546c8ckw5s70/QPST-2.7.399.rar


JB drivers -
http://www.mediafire.com/?8dbfehhtb8ak328http://www.mediafire.com/?8dbfehhtb8ak328

Jelly Bean BP Firmware
http://www.mediafire.com/?1axjuk693fcrbza



WARNING : Supported ito sa mga flare na nadedetect pa ng Pc if hndi ito ma detect sa pc dont do this anymore

Install QPTS (alam ko pamilyar kayo jn.. ginagamit yan sa mga broadband stick..)
install lahat ng drivers para walang aberya


Install drivers

1. Connect deadboot flare to PC / Laptop.

2. Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. If the item is there, you are done with driver install. If it does not exist, proceed to step3.

3. If there is no item under PORTS (COM & LPT), check device manager under OTHER DEVICES > Unknown Device

4. Double click UNKNOWN DEVICE > UPDATE DRIVER > BROWSE MY COMPUTER > browse to the folder where you saved extracted the ICS / JB drivers. It will install the driver, if it prompts for unsigned drivers, press INSTALL ANYWAY.

5. It should now be listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.

Run QPST and reprogram EMMC (dito tayu mag sisimula)

1. Run EMMC SOFTWARE DOWNLOAD.

2. Press BROWSE, it will detect your phone. Look for the PHONE TAB that says DOWNLOAD. Press OK.

3. Put check mark on PROGRAM BOOTLOADERS, PROGRAM MMC DEVICE, TRUSTED.

4. Under FLASH PROGRAMMER FILENAME, enter MPRG8X25.hex

5. Under BOOT IMAGE, enter 8X25_msimage.mbn

6. Press LOAD XML DEF > navigate to your extracted JB firmware > select rawprogram0 > press OPEN.

7. Press LOAD PATCH DEF > navigate to your extracted JB firmware > select patch0 > press OPEN

8. PRESS DOWNLOAD



9. An warning message may appear, TIME OUT WAITING etc etc or COOKIE NOT RECEIVED. If the error is TIME OUT WAITING, press OK and then press SWITCH DEVICE TO DLOAD. Check the flare, it will show RESET FOR ENTRY QPST.


10. Exit EMMC SOFTWARE DOWNLOAD. Proceed to flash Jelly Bean BP Firmware and then flash Jelly Bean img dump.

11. IF ERROR IS COOKIE NOT RECEIVED, sorry it is still bricked


PROCEDURE 3

GO TO THIS LINK!!!

https://www.facebook.com/media/set/?set=a.451139748289143.98869.390023244400794&type=3

 

[darcho]

bro tanung ko lng sana kung ano ung qpst??
d ko ksi magets bro new lng aq sa android at flare rn gamit ko thnk u ts

 

[malamigx]

kulang tut mo sir buti may nahanap ako na kumpleto thanks parin...

 

[shankxx18]

.pwde ba to xa cm flare 2.0,?.

 

[yuridrew]

bro tanung ko lng sana kung ano ung qpst??
d ko ksi magets bro new lng aq sa android at flare rn gamit ko thnk u ts

QPST stands for Qualcomm Product Support Tool.
It is a program that you use in conjunction with a data cable to reprogram certain things on your phone.
This is generally for service centre access only and not used by the average user. It is used for things like software upgrades and unlocking etc

it means ito ung ginagamit na program sa lahat ng qualcomm devices na software para mag program ng qualcomm phones like cm flare
basta qualcomm processor ito ang gagamitin na program para sa mga brick phones or upgrading

 

[novdrol]

The problem is ERROR IS COOKIE NOT RECEIVED . Baka meron na kayong solution para dito. Salamat...

 

[shankxx18]

pwdpa.to xa cm flare 2.0

 

[yuridrew]

as of now pag cookie not received ang prblem its more on harfware na ang cra...pero try pa din ninyo..ganun din sa akin sa cmula pero kumagat din

 

[yuridrew]

pde din sa cm flare 2.0 kac qualcomm din processor nia kaso quad core try ko mag hanap ng process about 2.0

 

[shankxx18]

pde din sa cm flare 2.0 kac qualcomm din processor nia kaso quad core try ko mag hanap ng process about 2.0

Cge poh wait aku..kc na etry kuna yan kagabe n0t recieve cokies ang sinabi eh

 

[bibby123]

may solution pa ba sa cookies no recieved?

 

[shankxx18]

ulit2x dw angang kumagat

 

[malamigx]

boss natry ko n lahat ng procedures sablay lang pagdating sa paginstall ng jb rom after cherry mobile logo hindi n sya tumutuloy... anu solution d2?

 

[yuridrew]

boss natry ko n lahat ng procedures sablay lang pagdating sa paginstall ng jb rom after cherry mobile logo hindi n sya tumutuloy... anu solution d2?

try mo mag install recovery download ka ng jb custom rom or use aio flasher

 

[algera21]

Sir Pwede Bayan Sa Cherry Mobile Burst Ko!!! Ayaw kasi mag Bukas!!!!!

 

[agentxpolpol]

bkt po failed to register ung qpts?

pahelp po

 

[jheyehm17]

sir deadboot po ba kapag white screen? or iba pang problem un? at wat po cause ng white screen? can this be fix?

TIA sir

 

[satch vai]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

ate, pwede din po ba to ipinost nyo gawin sa brick ko na flare 2.0? PLEEASSSE??? A I NEED SOME ANSWERS... EPEKTIB PO BA TO GUIDE NYO?

 

[yuridrew]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

ate, pwede din po ba to ipinost nyo gawin sa brick ko na flare 2.0? PLEEASSSE??? A I NEED SOME ANSWERS... EPEKTIB PO BA TO GUIDE NYO?

hmm pwede din kaso mag hahanap pa ng software and rom na suitable sa flare 2.0 dont worry pag aaralan ko din yan kasi nka flare 2.0 na din ako nanakaw kasi ung dting flare ko eh T_T

 

[onattano]

Re: CM FLARE..deadboot >>>QpST restart solution!! COMPILATIO

pwede ba to sa window 7? :3