DUAL WAN tutorial - WIMAX+WIMAX or WIMAX+USB 3g

[raisenknight]

hirap intindihin sir sana picture nalang po heheh

 

[rianne2129]

hirap intindihin sir sana picture nalang po heheh

oo sana may picture hehe para mdali makuha
---parang 1 connection lang nggamit ko pano kaya to nka dual wan naman na

 

[Android45]

uu epektib sya pinaka murang DUAL wan 1380 lang san ka pa

sir need pa ba iflashed yan? UNG BAGO NG CDRKING o ready to use na?

 

[rianne2129]

sir need pa ba iflashed yan? UNG BAGO NG CDRKING o ready to use na?

ready to use na..yan gamit ko pero dko madali yung dual wan

 

[Android45]

ready to use na..yan gamit ko pero dko madali yung dual wan

ganun ba sir, gusto ko try ung bago ang gamit ko kc ngyn yung isa ok nman smartbro+smartbro sa speedtest isa lang talaga pero sa download 1+1 = 2. ano sir gamit mo wimax+wimax?

 

[Kuro07]

i bought the 1380 dual wan router at hindi gumagana yung load balancing sakin.

Wimax + pldt dsl pppoe setup.

Help nmn po setup.

 

[aremarc]

Waiting

 

[areal]

ang gusto ko malamang dito sa router na to kung mapapagana ang VPN gamit ko na to tagal na ok na ok nga to...

 

[syntaxerror00100]

^
may vpn feature bro di ko nga lang nasubukan.

@Android45
tingin ko bro nagpapatong lang yung connection kapag pareho ng ISP yung dalawang connection. sa akin kasi smart + wimax hindi nagpapatong yung dl speed pero balance naman yung connection kahit nag da download mabilis parin browsing at stream nang hindi bumabagal download speed.
​

 

[pylorus]

SETUP for WIMAX+WIMAX

WAN1 - SELECT DHCP - put it in at INTERNET PORT of tomato router wimax1
WAN2 - SELECT DHCP - put it in LAN4 port of tomato router wimax 2

pano yan ts? yung WAN2 lalagay sa LAN4 at wimax2?

 

[alazaful]

boss TS,, may CDrking CW-5354U akong router, kaso ayaw tanggapin yung default user and pass para maacces ung homepage ng router, i've tried resetting it through button but to no avail, mukhang disabled ung button, balak ko kasi iflash ng fw na may dual wan support.. may ibang way pa po ba kayong alam para mareset ito..

i've tried googling this pero same problem but no guaranteed solution ung lumabas,, puro ibalik na lang daw sa cdr-king and ask for replacement..

TIA....

 

[agent0range21]

teka hanapin ko ung command

pede pa yata yan itelnet nakalimutan ko lang

 

[agent0range21]

boss TS,, may CDrking CW-5354U akong router, kaso ayaw tanggapin yung default user and pass para maacces ung homepage ng router, i've tried resetting it through button but to no avail, mukhang disabled ung button, balak ko kasi iflash ng fw na may dual wan support.. may ibang way pa po ba kayong alam para mareset ito..

i've tried googling this pero same problem but no guaranteed solution ung lumabas,, puro ibalik na lang daw sa cdr-king and ask for replacement..

TIA....

try this

*Un-brick/Fix your CW-5354 or CW-5354U:

1. Download the right firmware to C:/
2. Manually change your computer's IP to 192.168.1.33, subnet mask 255.255.255.0, and default gateway 192.168.1.1
3.go to cmd mode (START>RUN>cmd) and change directory to c:\ (cd c:\)
4. type in command "tftp -i 192.168.1.1 put xxxxxx.trx" or "tftp -i 192.168.1.1 put xxxxxx.bin"(depends on the firmware's name) "DO NOT PRESS enter YET!!"
5. Unplug the power, then Press re-set button while plug the power back in
6. When the LAN or WAN port light start to on, release reset button, then press enter
Then You should see the LAN port LED light flash, then below command line will show up. and "Transfer successfull" will show up. Wait 3-4 mins, and it;s done.
PS: if it shows "timeout occured" it means something goes wrong. you can try several times!

or this

*Using Default firmware or Dualwan version, which RESET button might NOT work, please do the following command to fix*

telnet 192.168.1.1 root/admin
nvram set btn_reset=7
nvram commit
reboot

(you should also do the command after every successful RESET because Nvram will be clear)

 

[agent0range21]

SETUP for WIMAX+WIMAX

WAN1 - SELECT DHCP - put it in at INTERNET PORT of tomato router wimax1
WAN2 - SELECT DHCP - put it in LAN4 port of tomato router wimax 2

pano yan ts? yung WAN2 lalagay sa LAN4 at wimax2?

uu tama sir sa LAN4 slot mo ilalagay ung 2nd WAN mo

 

[rianne2129]

i bought the 1380 dual wan router at hindi gumagana yung load balancing sakin.

Wimax + pldt dsl pppoe setup.

Help nmn po setup.

same tyo sir sana matulungan tyo n ts..
1 connection lang nggmit ko

 

[wubuzhidao]

may ganyan akong router.. try ko mamaya.. thanks..

 

[ryan_mempco]

ts, working b yan kc plan ku bibili mamaya s cdr king.. may 2 bm622 aku dito plan ku i dual wan para tataas ang DL speed ng modem kc heavy downloader aku.. TIA

 

[adzen07]

kapag smartbro canopy+wimax paano ang config nun mga sir?

saka anung ratio nila? pag sinet ko kasi ng dual wan na at nakaenable sila pareho si smart lang ang pumapasok, fail over, pag test ko sa speedtest, smart lang din gumagana, di man lang tumulong si globe sa upload

 

[agent0range21]

ts, working b yan kc plan ku bibili mamaya s cdr king.. may 2 bm622 aku dito plan ku i dual wan para tataas ang DL speed ng modem kc heavy downloader aku.. TIA

wimax + wimax gamit ko ngaun e

kung ayaw gumana try nyo irenew sa tomato router ung ip address
o kaya try nyo iclear ung NVRAM meron option dun sa ADMINISTRATION-CONFIGURATION

 

[adzen07]

newbie question po ung sa akin, kabibili ko lang kasi ng dual wan router