ill be making a short tutorial for the benefits of ka SB
RIGHT NOW WIMAX 1mb+3G GANTIMPALA SIM
downloading average 150-200kb/sec sa IDM hehe
d ko pa natry pag madaling araw itestdrive
MATUTUWA KYO SA TOMATO ROUTER
1. DUAL WAN
2. LOAD BALANCING
3. BITTORRENT = kht alang PC pede torrent
4. SAMBA file sharing
5. WIFI
6. DSL ROUTER
lets START
needed items
WARNING: HINDI PO GAGANA UNG FIRMWARE NA NASA LINK KO DUN SA TIG 1380 NA BINEBENTA NA BAGO NG CDRKING.
1. Cheapest Router with loadbalancing of 2WAN Tomato Flashed
only 1580
CDrking CW-5354U <===click here
2. Wimax and wimax or wimax and 3g broadband usb
AFTER BUYING THE ROUTER We need to Flashed it to DUAL WAN tomato firmware
DOWNLOAD THE FIRMWARE <====
after flashing it with the new firmware its now a DUALWAN capable loadbalancing router SO CHEAP
PROBLEM 1 = TOMATO ROUTER has same router IP with WImax 192.168.1.1 so theres a conflict we need to change the Tomato Router ip address to 192.168.2.1
SET YOUR DEFAULT IP ADDRESSES
WIMAX1 = 192.168.1.1
WIMAX2 = 192.168.3.1
ROUTER = 192.168.2.1
problem1 SOLVED
PROBLEM 2 = EACH router Has 2 DHCP SERVER again this is CONFLICT so we need to disable the DHCP server of TOMATO ROUTER
Problem 2 SOLVED
PROBLEM 3 = ENABLED THE USB SUPPORT FOR 3G
SELECT USB AND NAS- CHECK THE USB CORE SUPPORT
FLASHING THE TOMATOR ROUTER TO ENABLE DUAL WAN
1.Now plug the TOMATO ROUTER to your computer
put the UTP cable to the back port of your CPU then at the Tomato router LAN1-LAN4 port any port will work
note this is the 1st tym to config the router
2. GO TO YOUR BROWSER TYPE 192.168.1.1
username: admin password:admin
3.select ADMINISTION - UPGRADE
ok now select the TOMATO FLASH DUALWAN that we downloaded
then click ok
CONFIGURING THE TOMATO ROUTER
1.Now plug the TOMATO ROUTER to your computer
put the UTP cable to the back port of your CPU then at the Tomato router LAN1-LAN4 port any port will work
2. GO TO YOUR BROWSER TYPE 192.168.1.1
username: admin password:admin
3. GO to BASIC-NETWORK
SETUP for WIMAX+WIMAX
WAN1 - SELECT DHCP - put it in at INTERNET PORT of tomato router wimax1
WAN2 - SELECT DHCP - put it in LAN4 port of tomato router wimax 2
Under "LAN"
uncheck DHCP server
change IP address to 192.168.2.1
at the bottom click SAVE
SETUP for WIMAX+3G USB
WAN1 - SELECT DHCP - put it in at INTERNET PORT of tomato router wimax1
WAN2 - 3G - put the 3g broadband at the USB slot port of the tomato router
config the 3g
DIAL NUMBER - *99#
APN - http.globe.com.ph
modem port - 0
Under "LAN"
uncheck DHCP server
change IP address to 192.168.2.1
at the bottom click SAVE
CONFIGURING LAN ADAPTER OF PC TO STATIC IP
IPaddress 192.168.2.XX XX=2-255
default gateway - 192.168.2.1
DNS gateway - 192.168.2.1
NOTE: if you want to access the GUI of your tomato router
you need to type 192.168.2.1 after the configuration
and for wimax 192.168.1.1 still the same
finish sensya mablisan lang para magkaidea kyo
Status
heto SS
HEHE sa mga mababait dyan pahiram naman ng 2mb mac thankss
pa bm muna ts tnx.
cw-5356u na lang yung akin nag auautobalance rin kaya yun.....