E153 U1, U2 at U3 UNLOCK ---Free---

[xenon v12]

@Xenon

wait 10-15 seconds to click OK

wag gumamit ng dashboard habang nag pa-Flash mag e-error yan.

Connect ka Via Dial-up Connection Go sa Network Connections doon ka mag connect.

boss bkit kpag click ko ung SELECT FIRMWARE lumalabas e "extract from exe at parse from hmf?pno rin po mg connect sa dial-up connection?pa step by step nman po...

 

[tsibs23]

paano po ba magconnect nang hindi nagcoconect sa dashboard? panu yung dial up? pahelp naman oh bago lang kasi ako dito

 

[tsibs23]

thank you, na-unlock na ung sakin

 

[delubyoh]

Maraming Salamat Sir!
Check ko lang po kung OK na to. My nakalagay ng Smart sa Dashboard ko pero parang iba ata ung Firmware version ko. natural lang ba to?

Device name: E153
Application port: COM6
Serial number: BAA7NA1131109933
IMEI: XXXXXXXXXXXXXX
Hardware version: CD1E153M
Firmware version: 11.609.13.03.158

SALAMAT!

 

[Nash01]

Maraming Salamat Sir!
Check ko lang po kung OK na to. My nakalagay ng Smart sa Dashboard ko pero parang iba ata ung Firmware version ko. natural lang ba to?

Device name: E153
Application port: COM6
Serial number: BAA7NA1131109933
IMEI: XXXXXXXXXXXXXX
Hardware version: CD1E153M
Firmware version: 11.609.13.03.158

SALAMAT!

Try to insert other SIM (Globe or Sun), then try to check if your smartbro will accept it. You can verify it on the bottom portion with signal bar and carrier name. Ganyan din nangyari sa akin, unlock na sya. Congrats.

 

[BeerGinSinceBirth]

maraming salamat dito TS! sana gumana sa dongle ko.

 

[delubyoh]

Try to insert other SIM (Globe or Sun), then try to check if your smartbro will accept it. You can verify it on the bottom portion with signal bar and carrier name. Ganyan din nangyari sa akin, unlock na sya. Congrats.

Salamat sa reply Nash! oo meron! naginsert muna ako ng ordinaryong smart sim. may signal bar nakalagay at 3G SMART Buddy . at OK naman lahat sa Diagnostic! So open na pala! salamat!

 

[Failed!]

Permanent Na Pong Unlock yong Modem KO?

 

[ydissac]

para san un link ng firmware?
gagamitin din ba yun kasi sa
tutorial di naman sya ginamit...

nageerror kasi yun sakin pag
dating sa huawei flashing,
pagpinipindot ko yun extract
EXE nalabas error on windows
string...

paggagamitin ko naman yun
firmware update nghihinge ng
PASSWORD..


sakit sa bangs...

 

[conroe]

ok lang po ba ito kasi nawala yung serial number ng modem ko....

pakicheck po kung saan ako nagkamali...

 

[autocad09]

walang mali sayo bro unlock na yan hindi ka nag.iisa nawalan ng serial number ok lang yan

 

[moonshane]

nasunod ko nmn po ang problema bakit edge lang ang me signal,,, kapag wcdma wala po signal,,, edge lang ang na openline panu po to?pg switch ko s wcdma only wala signal..nga pla sun broadband ito inoponenline ko e153u-1 elp po

 

[hitler9885]

Sir Base sa Area yung Signal nyo.

 

[marlboroo]

thanks for sharing !

 

[mecloud50]

sir MARAMING salamt!@

na UNLOCK ko na po

may SERIAL AT IMEI

SALAMT

 

[optimumgiant]

ala b tutorial para sa windows 7 64 bit..

kc sakin lagi tack-up sa 8 bin...

tapos inugot ko kc napakatagal.

 

[mecloud50]

sir,,, sa bin 8. just wait lang po/// hayaan mo lang mag error sya.. tapos replug and yun flow na nxt inst.

 

[mecloud50]

Up for this

 

[val020194]

bakit broadband ko naopenline na pero mga 1week locked na ulit sa globe.??

 

[tytroz79]

pwedi ba to sa smartbro e153u-3?may naka pag unlock naba ng smartbro e153u-3?paki sagot naman po...thanks