E153 U1, U2 at U3 UNLOCK ---Free---

[bachquims]

ts.hndi po ba ito temporary unlock???

 

[aeron13]

wala pa bang solution sa mga bricked modem? huhuhu

 

[lian27]

bat sakin read info fail palagi..

 

[SEw910i]

sir lian
tingnan mo sir yung port ng modem sa flasher.
check mo kung tugma sila sa dev.manager
pag hindi ma fail tlaga yan..




siesta mga dre

 

[juichimeyku]

Sir what if naka temporary unlock tong broadband ko now pwede ba to? naka vpn kasi ako pang smart just asking
need ba talaga ng connection ng flasher huhu

 

[vrgl1214]

will try this ll8ter,marami n kc positive FB..tnx otor!

 

[razar14]

Sir what if naka temporary unlock tong broadband ko now pwede ba to? naka vpn kasi ako pang smart just asking
need ba talaga ng connection ng flasher huhu

yap pwede yang temporary unlock using smarty sim + vpn. . .ganyan ginawa kong process. . .basta't pag may nagpopup pagkatapos nung flash modem > > >normal mode. . .magbilang ka ng 10 seconds or more bago mo iclick ung OK para hindi sya

READING INFO FAIL

 

[juichimeyku]

Ahh sige po hehe

 

[juichimeyku]

Sir bakit ang detected nya sa flasher e yung PC UI Interface na number?

Naguguluhan ako ang ibaback up kasi yung Application Interface eh ang nadedetect sa flasher PC UI Interface? bat failed sakin :'( help haha sori ah naguguluhan talaga ko kelan lang ba iko close yung dongle? hay xenxa na po
Nareread nmn xa kapag hindi connected? lalala

 

[lian27]

sir lian
tingnan mo sir yung port ng modem sa flasher.
check mo kung tugma sila sa dev.manager
pag hindi ma fail tlaga yan..





siesta mga dre

pwede bang 2 modem nakasalpak yung isa kasi nakakonek sa net smart bro ngaun iunlock ko tong e153u-2 ko pwede ba yun?

laptop gamit ko eh


same kami nasa taas ko ui interface ang nadedetect nung flasher

 

[soultuner]

Update naman dyan ts para sa mga bricked na modem.

 

[hitler9885]

Sir bakit ang detected nya sa flasher e yung PC UI Interface na number?

Naguguluhan ako ang ibaback up kasi yung Application Interface eh ang nadedetect sa flasher PC UI Interface? bat failed sakin :'( help haha sori ah naguguluhan talaga ko kelan lang ba iko close yung dongle? hay xenxa na po
Nareread nmn xa kapag hindi connected? lalala

how to back-up using QPST thread ni TS http://www.symbianize.com/showthread.php?t=819100
bago magback-up close muna yung dashboard.

kung gagamit naman ng Flasher wag mag connect sa dashboard mag e-error yan Close mo at Connect ka Via Dial-up Connections Go sa Network Connections.

 

[hitler9885]

pwede bang 2 modem nakasalpak yung isa kasi nakakonek sa net smart bro ngaun iunlock ko tong e153u-2 ko pwede ba yun?

laptop gamit ko eh


same kami nasa taas ko ui interface ang nadedetect nung flasher

Yang 3G ui interface talaga made-detect ng Flasher..

 

[rmlambino]

thanks!na open line nga globe tatto 153 ko.try ko naman sa smartbro ko na 153 din.mabuhay!

 

[chococookiecrusher]

Do this at your own risk.

Software Needed
1. QPST http://www.x-drivers.com/catalog/flash/mobile_phones/companies/qualcomm/models/qpst/12051.html
2. Huawei Flasher Salamat sa tao na gumawa nito. http://www.francesco-pompili.it/index.php/component/jdownloads/summary/3/45.html
3. E153 Downgrde Firmware http://www.dc-files.com/files/huawei/modems/E153/firmware_update/E153Update_11.609.18.00.00.B427.zip


1. Backup NVitem (very important)
*Follow nyo nlng kung paano mag backup ng NVitems using QPST sa thread nato.
http://www.symbianize.com/showthread.php?t=819100
2. Downgrading firmware using Huawei Flasher
*Plug your modem, Close dashboard
*Run "Huawei Flasher" (No need to install). Dapat my internet connection para gumana ang Flasher.
*See kung detected ang port ng modem

*Click "Select Firmware" at e point nyo sa na download na firmware
ganito ang mangyayari. Dapat 6246_K ang makikita ninyo dyan.

^ e uncheck nyo po yung ika 6 na bin. (kailangan hindi maisama yan para hindi mag error)
*Click "Flash Modem" then "Normal Mode" may popup na lalabas "Press OK if modem is connected" wait 10 sec bago e press ang "OK". Pag na press na ang OK mag lo-load na yung mga bin except bin6 kasi ina uncheck yun.

^hayaan nyo lng hangang matapos, it itakes several time para matapos yung ika 8 bin. mag error po yan sa huli ng bin 8 pero ok lang yan just replug modem with other sim. Wag nyo muna open dashboard kasi hindi pa yan tapos, mag restor muna.

3. Restore NVitems - pag hindi ninyo ito ginawa hindi successfull ang unlocking ninyo, mawawala pa IMEI ninyo. (A must)
Re-insert lang po yung modem at gamitin ang QPST para ma restore yung NVitems na kinuha natin. Browse nyo lng po kung saan nyo tinago ang backup.

pag tapos na na ma restore re insert modem with other SIM.


SS

Globe

Smart

BTW, parang pwede rin to sa ibang model ng huawei e try ko pa ito.

Wag nyo po akong E PM pag meron kayong tanong, post nyo lng po dito..

Say"thanks" lng ang bayad...

Your Free to update this kind of trick.

PARA SA MGA NA BRICK NA MODEM, WAG MAG ALALA MAY HINAHANDA PO AKO JAN...WAIT LNG KAYO..
WAG NA NINYONG PAG EXPERIMENTUHAN YAN DAPAT DETETED PA YUNG "3G APPLICATION INTERFACE"


Para sa mga modem na na semi brick at detected pa yung "3G UI Interface". Ito gawin nyo para back to Normal ang Modem nyo.
(Credits to Sir Badiding)

1.plug your bricked modem
2.open device manager.Ports(PORTS & LPT)
3.check if your huawei 3g pc ui interface(com#) is detected..take note of the com port #.
4.close globe dashboard
5.connect to internet using another connection(most preferred:smartbro modem or wimax..kz pg globe broadband gmitin mo minsan nagddc xa.if no other means just try to use another globe broadband as long as hnd xa mag dc.
6.open huawei flasher.wait until it detect your bricked modem(checked com port # if it corresponds with the one listed in device manager.
7.select firmware..point to the firmware you downloaded.
8.just uncheck bin 6
9.now this is important..press Flash Modem..then resurrect mode..wait until it reach bin 8 to load until it says failed.
10.close huawei flasher..wait until your modem is detected.and dashboard appear.then close dashboard..unplug modem..
11.reconnect your modem..now check device manager..3G PC UI interface detected and 3G Application interface detected..if both 2 interface are detected..your now ready to flash again your modem but beware plz follow sir moklo tutorials on first page but instead of unchecking bin 6 alone..unchecked nio rin yung bin 8..sa observation ko depende kz sa modem..yung iba ok yung mag error s bin 8..kya yung mga na brick when flashing at hnd na uncheck yung bin 8
plz uncheck bin 8..

AFTER SUCCESFULLY FLUSHING YOUR MODEM.UNPLUG IT AND RECONNECT AGAIN(no sim) .RESTORE MO NA YUNG BACKUP FILES MO..im sure alam mo how to restore back up files.

Pra sa mga nawalang imei eto how to write your imei:
1.QPST tool
2. Qpst configuration
3.add port.check device manager what com port # ang 3g pc ui interface.at yun ang i add mo
4.highlight it..then press Star Client..RF NV item manager..chec mo sa lower right kung tama ba ang com port #..kung hnd click mo yung Setting.,Comport then type yung com port # ng 3g pc ui interface mo.
5. click file.read supported nv items..click #550 NV_UE_
6.may pop up yan sa right corner.click hex.then input your old imei # (printed yan either sa loob or back portion ng modem mo)
ganito ang pag input ng old imei mo (credits to sir moklo):


example IMEI 357289041212679

1st box - just input "8"
2nd box - add letter "a" to the first number 3a
3rd box - invert - "75"
4th box - invert - "82"
5th box - when the next # is 0 like 90 just input "9"
6th box - invert "14"
7th box - invert "12"
8th box - invert "62"
9th box - invert "97"

pg wlang error mareceive ibig sbihin ok na nag imei..unplug modem.
insert mo na smart sim.plug modem and check if your imei is ok sa diagnostics ng broadband mo..






Positive feedbacks

salamat kosa!!!! nabuhay mo ang namatay ko na modem

 

[juichimeyku]

how to back-up using QPST thread ni TS http://www.symbianize.com/showthread.php?t=819100
bago magback-up close muna yung dashboard.

kung gagamit naman ng Flasher wag mag connect sa dashboard mag e-error yan Close mo at Connect ka Via Dial-up Connections Go sa Network Connections.

ahaha ganun pala yun via dial up lng para makakonek thanks po

 

[aizirc]

ts panu don sa "selec firmware...........na select q n un kasu panu n po dun ung........""""""e point nyo sa na download na firmware
ganito ang mangyayari. Dapat 6246_K ang makikita ninyo dyan""""".'?d q kc makuha 2..tnx..

 

[juichimeyku]

Ala lang nakaka ELIBz lang nyahaha

 

[j3boy]

TS succes.,

 

[lian27]

Yang 3G ui interface talaga made-detect ng Flasher..

ok sir try ko bukas pagod na ko eh hehehe dial up magkokonek hindi sa dashboard para madetect tama ba?