ERROR CODE 006 (Canon ip2770)

[the yuz]

MGA MASTERS PA TULONG NAMAN PO!

Ire-reset ko po sana itong printer na canon ip2770

bale nagdownload na ako ng resseter
then na set ko na sya sa service mode . . yung pinepress yung resume button 4x times bla bla bla
tapos pag nirereset kuna sya using the resseter palagi lumalabas ung ERROR CODE 006!

 

[the yuz]

up ko lang po

 

[the yuz]

up ko ule

 

[kraemner15]

try mo po kaya six time sa pag pasuk sa service mode..

 

[eonelorenzo]

sir may sensor yan sa cartridge yung cvolored try mo e taas yung sensor bka di mo napansin pag ka alis mo ng cartridge na bumaba yun

 

[Penjstriker2014]

MGA MASTERS PA TULONG NAMAN PO!

Ire-reset ko po sana itong printer na canon ip2770

bale nagdownload na ako ng resseter
then na set ko na sya sa service mode . . yung pinepress yung resume button 4x times bla bla bla
tapos pag nirereset kuna sya using the resseter palagi lumalabas ung ERROR CODE 006!

Try nyo po ito:
1. try to uninstall po yung driver ng printer
2. tapos install it again
3. do the resetting steps with the sevice tools of your printer
4. do the printing
5. and then your printer is fix...

 

[carloariscon]

hello mga master,

i've tried everything that is found in the internet on how to reset the counter. the problem now is i can no longer access the service mode after pressing reset button 5 times. it just shows steady orange light after pressing reset button 5 times and releasing the power button.

nung una naa-access ko ung service mode pero nagna-not responding ung service tool ko after clicking "MAIN" button. so tinanggal ko ung printer from usb port ng pc then magrespond sya ulit pero ofcourse disconnected na printer ko. did this 4 times, then after nun ayun na ang problema. orange light na lang after pressing reset button 5 times (not 4 times). sabi sa net corrupted na daw eeprom ko and needs to replace the board.

nakakapag print nmn po ako kasi laging nagpa-popup ung "ink absorber is almost full" message. tapos wala pang pink color. yellow, black and blue are okay.

is there any alternative to fix my problem?

TIA

 

[carmelo007]

mali po ang enter mo ng service mode...5x po yung resume button.

 

[jaysonalfiler26]

mali po ang enter mo ng service mode...5x po yung resume button.

na fix na po ba itong error 006? kung na fix na po anu solution? ganito rin yung samin eh thanks po

 

[xperiajko]

waiting for solution..
same problem here, please fix fix fix
tia

 

[gieroncastiel]

new ip2770 is 5x hindi po 4x.patry muna boss

 

[String2016]

pag hindi ma reset laging error logic board na sira nyan

 

[juanreset]

up po. same problem sa G3000 ko.

 

[guitars16]

ts 5 times ang alam ko papuntang service mode nyan kapag ganun pa din sira na yung board ng reset mo 500 sa odion mall ka papagawa ko lang nung akin hindi na kasi ma reset sana naka tulong ako sa opinion ko

 

[jaysonalfiler26]

Wala parin po ba solutiondito sa error 006, replace booard po ba agad? ako 5x ginawa ko sa resume button nag steady yung orange light nya, pero pag napasok sa service mode kaso nga lang my error 006

 

[juanreset]

up for this. may solusyon na b a sa error 06?

 

[gentiles]

same problem po sa akin steady lang lumalabas any solutioin kya