- Messages
- 106
- Reaction score
- 0
- Points
- 26
Fluxion 3 link: https://github.com/FluxionNetwork/fluxion
How it works
1. Scan the networks
2. Capture a handshake (can't be used without a valid handshake, it's necessary to verify the password)
3. Use WEB Interface
4. Launch a FakeAP instance to imitate the original access point.
5. Spawns a MDK3 process, which deauthenticates all users
connected to the target network, so they can be lured to connect to the FakeAP and enter the WPA password.
6. A fake DNS server is launched in order to capture all DNS requests and redirect them to the host running the script.
7. A captive portal is launched in order to serve a page, which prompts the user to enter their WPA password.
8. Each submitted password is verified by the handshake captured earlier.
9. The attack will automatically terminate, as soon as a correct password is submitted.
Requirements
A Linux-based operating system. We recommend Kali Linux 2 or Kali 2016.1 rolling. Kali 2 & 2016 support the latest aircrack-ng versions. An external wifi card is recommended.
----------------------------------------------------------------------------------------------
Usb adapter supported in kali linux.
Link: http://www.wirelesshack.org/best-kali-linux-compatible-usb-adapter-dongles-2016.html
Download Kali Linux here: https://www.kali.org/downloads/
=====================================
NOTE: This is not about fluxion 3 installation it's about hacking Wi-Fi using fluxion 3.
Instructions:
1. Make sure your usb wifi adapter was supported in Kali Linux so that you can enable the monitor mode & the fake AP.
2. Make sure you update & upgrade your kali linux before you can perform successfully the attacks of fluxion 3 copy this command in your terminal window > apt-get update -y && apt-get full-upgrade -y <
3. choose where do you to save the fluxion installer example > cd Desktop < & copy this command to download the fluxion 3 > git clone --recursive https://github.com/FluxionNetwork/fluxion.git <
4. change directory to fluxion folder type > cd fluxion <
5.change permission of your fluxion.sh copy this > chmod a+x fluxion.sh
6.run the fluxion.sh copy this > sudo ./fluxion.sh
================================================== ==================================================
For more info. Watch My Video Demo link below:
SUBSCRIBE To My Youtube Channel For More Ethical Hacking Videos: https://www.youtube.com/nxtechHacks
If you have More Question Message of My FB: https://www.facebook.com/nxtechHacks/
View attachment 329899
Video Demo Link: https://youtu.be/Y_CI8cr8ZyA
(Updated 2018) Video Demo here: https://youtu.be/WNskgqhXLL4
How it works
1. Scan the networks
2. Capture a handshake (can't be used without a valid handshake, it's necessary to verify the password)
3. Use WEB Interface
4. Launch a FakeAP instance to imitate the original access point.
5. Spawns a MDK3 process, which deauthenticates all users
connected to the target network, so they can be lured to connect to the FakeAP and enter the WPA password.
6. A fake DNS server is launched in order to capture all DNS requests and redirect them to the host running the script.
7. A captive portal is launched in order to serve a page, which prompts the user to enter their WPA password.
8. Each submitted password is verified by the handshake captured earlier.
9. The attack will automatically terminate, as soon as a correct password is submitted.
Requirements
A Linux-based operating system. We recommend Kali Linux 2 or Kali 2016.1 rolling. Kali 2 & 2016 support the latest aircrack-ng versions. An external wifi card is recommended.
----------------------------------------------------------------------------------------------
Usb adapter supported in kali linux.
Link: http://www.wirelesshack.org/best-kali-linux-compatible-usb-adapter-dongles-2016.html
Download Kali Linux here: https://www.kali.org/downloads/
=====================================
NOTE: This is not about fluxion 3 installation it's about hacking Wi-Fi using fluxion 3.
Instructions:
1. Make sure your usb wifi adapter was supported in Kali Linux so that you can enable the monitor mode & the fake AP.
2. Make sure you update & upgrade your kali linux before you can perform successfully the attacks of fluxion 3 copy this command in your terminal window > apt-get update -y && apt-get full-upgrade -y <
3. choose where do you to save the fluxion installer example > cd Desktop < & copy this command to download the fluxion 3 > git clone --recursive https://github.com/FluxionNetwork/fluxion.git <
4. change directory to fluxion folder type > cd fluxion <
5.change permission of your fluxion.sh copy this > chmod a+x fluxion.sh
6.run the fluxion.sh copy this > sudo ./fluxion.sh
================================================== ==================================================
For more info. Watch My Video Demo link below:
SUBSCRIBE To My Youtube Channel For More Ethical Hacking Videos: https://www.youtube.com/nxtechHacks
If you have More Question Message of My FB: https://www.facebook.com/nxtechHacks/
View attachment 329899
Video Demo Link: https://youtu.be/Y_CI8cr8ZyA
(Updated 2018) Video Demo here: https://youtu.be/WNskgqhXLL4
Attachments
Last edited:
