[GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 update)

[bongbong22]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

mag boss . anu po kaya nangyari sa FUBO ko pag gcng ko nlang di ko xa mbuksan ayaw dn mag charge ni reflask ko ayaw pdn . di ko po alam kung anu nangyari iniwan ko nman un na my charge pa help nman po

 

[xxxraymond]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

Mga bossing, may nakakaalam po ba kung san pwede magpa replace ng bagong battery ng fusion bolt? Less than 30mins nalang kasi tumatagal ang buhay nitong unit ko. More than 1 year na rin sya sa akin kaya understandable na bumigay na ang battery nya. Advice naman po. Salamat

 

[vheryoness]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

Mga bossing, may nakakaalam po ba kung san pwede magpa replace ng bagong battery ng fusion bolt? Less than 30mins nalang kasi tumatagal ang buhay nitong unit ko. More than 1 year na rin sya sa akin kaya understandable na bumigay na ang battery nya. Advice naman po. Salamat

may mga shop na sa mall na nag aayos ng fubo sir, try mo na lng mag inquire sa kanila, meron sa baclaran eh, add mo sa facebook yung fubo fan page madami dun mga technician ng fubo sir

 

[bongbong22]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

Mga bossing help nman po ayaw na bmks at mgcharge fubo ko anu po gagawn ko ?

 

[dominique2007]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

Pagtulong naman po mga master yung sakin pagdating ng 10% nageeror na ano po kaya pwede kong gawin at bakit po hanggang 10% lang salamat po god bless

 

[Jinjuriiki]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

tnx d2 nabuhay q ung fubo q heheh kaso naging intsik panu ganun ba tlaga un chinese language inaus q nlng sa setting

 

[jumpfuds]

Re: [GUIDE] Fusion bolt upgrade to Official Ainol Novo7 Venu

nice, latest ainol nako, tanong lang, bat sa firomi, pagkaflash, derecho ako twrp recovery, at pag boot system pinili ko sa twrp, no os installed daw, paano po kata ito, tnx

 

[jatrix]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

Mga boss patulong naman po bakit ang tagal po sa 5%???.. please help ano po problema kapag ganito?? sinunod ko naman ng tama yung instruction.. di ko sinama yung vendor apk kasi wala naman sa instruction.. please help

 

[vheryoness]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

Mga boss patulong naman po bakit ang tagal po sa 5%???.. please help ano po problema kapag ganito?? sinunod ko naman ng tama yung instruction.. di ko sinama yung vendor apk kasi wala naman sa instruction.. please help

sir download mo ulit yung firmware, madaming beses na nangyari dito yan nag sstock dahil corrupted yung file, so download mo lang ulit then repeat the process

 

[luiscordero]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

Magkaiba po ba fubu sa fusion bolt?

 

[vheryoness]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

Magkaiba po ba fubu sa fusion bolt?

same lang sir fubo yun, fussion bolt, fubu bastos yun haha

 

[luiscordero]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

I made it easily! thanks ts!
New Notification scrooling bar it has and other

- - - Updated - - -

bakit wala po dito ang thanks button? thank you ts!!!
kaso pag nag create partition lin2sd at success then reboot, kaso nag rereformat syang kusa at bumabalik sa dati at reformatted ulit, bakit po ganun? pero tinry ko kasama sa flash ang vendor nag ok naman ang partition ni link2sd kaso dami apps na tsekwa

- - - Updated - - -

problem fixed

 

[ppangilinan]

Re: [GUIDE] Flashing/Upgrading CM Fusion Bolt (new 2014 upda

Working po itong guide na ito ts slamat ng mrami nakasave ako ng mahigit 1month sa pagpaparepair sa service center dahil dito nag reset factory seting lang ako na tulala na yung fubo ko buti nakita ko itong thread mo slamat tlaga.

 

[jomhar2012]

latest firmware jan 2014

disclaimer
i am not responsible if your tablet gets bricked, by following the process you are voiding your warranty and significant damage may be caused to your device.
If you are naive enough to screw somewhere, then it is your responsibility.
Software are unpredictable in nature, one may/may not act as predicted especially in case of rooting (personal experience). Hence my friend, treat with ultra care.
In short,
i am not responsible for any damage to your tablet
(please read through before starting any process)

make a backup of all your files inside your tablet. The flash/upgrade process will format your tablet, deleting everything.

1.download the two archive files here:
new firmware update tool version 1.05.02
firmware update tool
latest firmware

• 4.2.2 jan 2014 http://yadi.sk/d/iqtkqbpyfyhn3

previous firmware

• 4.2.2 0523 http://d-h.st/zpp
• 4.2.2 firmware hdmi fix http://d-h.st/wkv
• 4.1.2 0428 firmware: http://d-h.st/ujv
• 4.1.1 0328 firmware http://d-h.st/v0u
• 4.1.1 0203 firmwarehttp://d-h.st/mlq
• owl player http://d-h.st/hxj

2. Shutdown fusion bolt and then disconnect from pc
3. Hold key "volume+", then connect pc usb port and wait few seconds
4. Pc will ask for unknown device drivers, select the path to folder "\hero 4 nuclear upgrade tool\driver\" from "firmware update tool" and let install them
5. Start the firmware update tool and open the jellybean_atm7029_7_a_130328.fw file
6. Important: Select all the three .img files (misc.img, rec.img, system.img) if you forget anything to select the fusion bolt will not boot anymore!
7. Click down button and wait until successful 100% flashing done
8. Disconnect from usb and let the venus startup, first start may takes some minutes more than usually
9. Enjoy your new ainol novo venus

Video tutorial by cloud deter http://www.youtube.com/watch?feature=player_embedded&v=9ozkcdkg1gy

credits to:
http://forums.zzkko.com/
http://www.slatedroid.com
http://dragondevs.com

feedbacks

ok ba yung latest?

 

[ppangilinan]

ok ba yung latest?

ok sakin boss mabilis nmn at wlang bugs so far.

 

[xachie]

Re: [GUIDE] CM Fusion Bolt upgrade to Ainol Venus Lite firmware 0203

ok nmn lahat po. pero bkt po na istuck sa 5% ung pagflash..? any help?

 

[rham13]

Re: [GUIDE] CM Fusion Bolt upgrade to Ainol Venus Lite firmware 0203

skin boss hanggang 5% lng din po..pa help mo mga bossing..thanks

 

[vheryoness]

Re: [GUIDE] CM Fusion Bolt upgrade to Ainol Venus Lite firmware 0203

ok nmn lahat po. pero bkt po na istuck sa 5% ung pagflash..? any help?

skin boss hanggang 5% lng din po..pa help mo mga bossing..thanks

download nyo lang ulit.. corrupted lang yan, nangyari din sakin yan eh..

 

[rayne02]

sir ung CM fussion bolt q po na drain xa e ndi q po ma charge anu alternative sollution bukod sa DC power supply? wla q nun e

 

[argon1204]

Latest Firmware Jan 2014

Disclaimer
I am not responsible if your tablet gets bricked, by following the process you are voiding your warranty and significant damage may be caused to your device.
If you are naive enough to screw somewhere, then it is your responsibility.
Software are unpredictable in nature, one may/may not act as predicted especially in case of rooting (personal experience). Hence my friend, treat with ULTRA care.
In short,
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR TABLET
(Please Read Through Before Starting Any Process)

Make a backup of all your files inside your tablet. The flash/upgrade process will format your tablet, deleting everything.

1.download the two archive files here:
new Firmware Update tool version 1.05.02
Firmware Update Tool
Latest Firmware

• 4.2.2 Jan 2014 http://yadi.sk/d/IqtkqbPyFyHN3

Previous firmware

• 4.2.2 0523 http://d-h.st/zpp
• 4.2.2 Firmware HDMI Fix http://d-h.st/WKV
• 4.1.2 0428 Firmware: http://d-h.st/uJV
• 4.1.1 0328 Firmware http://d-h.st/v0u
• 4.1.1 0203 Firmwarehttp://d-h.st/MLQ
• Owl player http://d-h.st/HXj

2. shutdown Fusion bolt and then disconnect from PC
3. hold key "volume+", then connect PC USB port and wait few seconds
4. PC will ask for unknown device drivers, select the path to folder "\Hero 4 nuclear upgrade tool\Driver\" from "Firmware Update Tool" and let install them
5. start the Firmware Update Tool and open the jellybean_atm7029_7_a_130328.fw file
6. Important: select all the three .img files (misc.img, rec.img, system.img) if you forget anything to select the Fusion bolt will NOT BOOT anymore!
7. click DOWN button and wait until Successful 100% flashing done
8. disconnect from usb and let the Venus startup, first start may takes some minutes more than usually
9. enjoy your new Ainol Novo Venus

Video Tutorial by Cloud Deter http://www.youtube.com/watch?feature=player_embedded&v=9OZKCdkg1GY

credits to:
http://forums.zzkko.com/
http://www.slatedroid.com
http://dragondevs.com

feedbacks

\


Boss, ask ko lang po sana kung pwede rin po ba to sa Fusion Storm ....? kc po mag hang logo sya...... pls...pls... pls