[help] asked lang about electronics(battery)

[ranzz]

Good day mga ka-sb at sa mga magagaling na electronics dyan

asked lang po about sa battery(amphere)
.
Meron po kasi akong ginawang project,
tapos ang hardware po ay kailangan nang atleast 12v - 34v 2 amphere
.
Wala po kasi akong makita na battery na 2 amphere.
.
Tanong ko po pwede po bang gagamit ako nang mataas na amphere?
Hindi po kaya sasabog tong hardware ko?
.
.
.
.
Thanks in advance po sa mag-reply.


Paki lipat nalang po if mali yung section....

 

[zeus001]

Good day mga ka-sb at sa mga magagaling na electronics dyan

asked lang po about sa battery(amphere)
.
Meron po kasi akong ginawang project,
tapos ang hardware po ay kailangan nang atleast 12v - 34v 2 amphere
.
Wala po kasi akong makita na battery na 2 amphere.
.
Tanong ko po pwede po bang gagamit ako nang mataas na amphere?
Hindi po kaya sasabog tong hardware ko?
.
.
.
.
Thanks in advance po sa mag-reply.


Paki lipat nalang po if mali yung section....

depende sa hardware mo,
kung me minimum yan me maximum allowable capacity yan...

 

[ranzz]

depende sa hardware mo,
kung me minimum yan me maximum allowable capacity yan...

thanks sa reply boss ito po yung specs/feature nang hardware

Features:

Driver: L298N Dual H Bridge DC Motor Driver IC
Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V
Driven part of the peak current Io: 2A
The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)
The logical part of the operating current range: 0 ~ 36mA
Control signal input voltage range:
Low:-0.3V
High: 2.3V
Enable signal input voltage range:
Low: -0.3
High: 2.3V
Maximum power consumption: 20W (when the temperature T = 75 Deg C)

 

[zeus001]

thanks sa reply boss ito po yung specs/feature nang hardware

Features:

Driver: L298N Dual H Bridge DC Motor Driver IC
Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V
Driven part of the peak current Io: 2A
The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)
The logical part of the operating current range: 0 ~ 36mA
Control signal input voltage range:
Low:-0.3V
High: 2.3V
Enable signal input voltage range:
Low: -0.3
High: 2.3V
Maximum power consumption: 20W (when the temperature T = 75 Deg C)

hmmmm..

kung ako maghahanda ako ng isa pang board na yan ung isa ididirect ko sa batt
ung isa lalagyan ko ng regulator,,

 

[ranzz]

hmmmm..

kung ako maghahanda ako ng isa pang board na yan ung isa ididirect ko sa batt
ung isa lalagyan ko ng regulator,,

ok boss thank you....

boss bka may circiut diagram ka sa voltage regulator dyan ^_^