[HELP] Hindi ko mapagana Dual Graphics

[imbaako123]

Eto po specs ko:

OS: Windows 10 64 bit
CPU: A8-7600
GPU: Asus r7 240 2Gb Low Profile
RAM: 1866MHz 2x 4GB Hyperx Fury
SSD: Kingston SSDNow V300 240GB
HDD: Generic Toshiba HDD 500GB
MoBo: EMX-A70FM2+iCafe
Casing: Neutron Colt 9022
PSU: ATX PS2? (600W pagkakaalala ko)

AMD Driver: 16.3

Naka-enable na po yung surround view sa bios at naka force narin yung IGD.

Eto po mga natry ko nang gawin:
Palitan yung RAM speed from 1333, 1600 and 1866 (with dual channel), ginawa ko narin ang lahat ng ito with single stick.
Ioutput yung video sa MoBo and sa VCard.

Pahelp po kung paano paganahin ang dual graphics dito

Eto po screenshot:
View attachment 280048
View attachment 280057
View attachment 280062

 

[nubbest]

did you enable it from crimson?

 

[imbaako123]

did you enable it from crimson?

Iba ba yung amd radeon na software? Dinownload ko drivers and software from amd site.

 

[2fast2run]

sir di po yan gagana.. buti kong nka videocard ka na install, ang pagkakaalam ko single graphic lng gagana pagnka onboard

 

[imbaako123]

sir di po yan gagana.. buti kong nka videocard ka na install, ang pagkakaalam ko single graphic lng gagana pagnka onboard

What do you mean po? Asus r7 240 yung video card ko, idual-graphics ko siya with A8-7600 APU, sabi naman sa specs sa amd compatible ang a8-7600 at r7 240 para sa dual graphics

 

[sub_zer0]

di po ako familiar sa apu pero pa check ng thread na ito , baka po makatulong

 

[imbaako123]

di po ako familiar sa apu pero pa check ng thread na ito , baka po makatulong

Nasubukan ko na po pero wala paring dual graphics option sa amd radeon software.

 

[nubbest]

hanapin mo tong setting na to.

View attachment 280046

 

[imbaako123]

hanapin mo tong setting na to.

View attachment 1142869

Wala siya boss

 

[nubbest]

its under "additional settings" in preferences tab.

 

[imbaako123]

its under "additional settings" in preferences tab.

Wala parin.

 

[nubbest]

plug your cable to your dgpu then boot to windows and upload a screenshot of device manager with the display adapters expanded.

 

[ride_bmx_mhell]

check mo total ng video memory sa dxdiag kpg nka onboard ,tpos check mo ulit kpg nka gpu kpg lumagpas ng 2gb,,gnyan ung sa tropa ko msi nga lng board ,kpg nka igd mbaba sa dxdiag vc mem,,kpg nka gpu asa 4gb yta un di q maalala qng 3 or 4 basta nag add ung onboard at gpu sa vc mem sa dxdiag weirdo nga eh,wla din gnyan options un,OS nya win8 64x ,kpg nka win7 64x di nag aadd,,tnamad n kmi kalikutin umandar na kc dota nya

- - - Updated - - -

yung sa tropa q lumabas nmn sa device manager ung gpu at sa a8 nya,wla nga lng din enable dual sa crimson,action taken gya ni ts palit d2 palit duon,change os win7 64x gnun p din ,palit win8 64x nging 4gb something ung vc memory s dxdiag,na instol nmn maayos ung drivers both gpu/a8 vc driver,,same spec ke ts maliban sa mobo

 

[imbaako123]

plug your cable to your dgpu then boot to windows and upload a screenshot of device manager with the display adapters expanded.

uploaded na po sa post. still no option boss.

 

[nubbest]

ilang gb yung r7 240 mo? go to bios and upload a picture of your frame buffer size. i want to see if you did it correctly.

 

[imbaako123]

ilang gb yung r7 240 mo? go to bios and upload a picture of your frame buffer size. i want to see if you did it correctly.

2Gb, nasa post na po screenshot

 

[nubbest]

plug your cable to your mobo and set igp as primary/preferred video device. boot to windows and check again your "additional settings"

 

[imbaako123]

plug your cable to your mobo and set igp as primary/preferred video device. boot to windows and check again your "additional settings"

still no luck. walang nagbago.

 

[nubbest]

download mo na lang ccc na pre-crimson. use ddu to erase the previous drivers.

 

[imbaako123]

download mo na lang ccc na pre-crimson. use ddu to erase the previous drivers.

Ito po ba yun? http://support.amd.com/en-us/kb-articles/Pages/latest-catalyst-windows-beta.aspx