help sa usb mode ng b315s-936

[cezaldz14]

patulong naman mga boss, may nbili ako b315s-936 dati, openline na sya, pero gusto ko sna magkafull admin access para mai LTE ko cgnal, kaso sa mga tutorial na nabasa ko, sinunod ko naman ng tama mga yun, di pa rin ako makapasok sa usb mode/green led, hanggang blue led lang ako lage, may paraan ba para maka usb mode ako at mkproceed sa debranding? TIA!

- - - Updated - - -

nagamit ko na ung dalawang method sa mga tutorial, baka mga boss may alam kayong paraan?

 

[dellomc]

bka wala na sya usb mode. eto ts subukan mo hindi ako ang gumawa nyan copy paste ko lang nalimutan ko ung gumawa eh credits sa knya. hit thanks kung nkatulong



Preparation...

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset

3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,

7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,

at^sfm=0
at^reset



<request>
<mode>2</mode>
</request>


at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
AT ^ SYSCFGEX = "00", 3FFFFFFF, 1,2,800C5 ,,





View attachment 281862

 

[cezaldz14]

bka wala na sya usb mode. eto ts subukan mo hindi ako ang gumawa nyan copy paste ko lang nalimutan ko ung gumawa eh credits sa knya. hit thanks kung nkatulong



Preparation...

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset

3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,

7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,

at^sfm=0
at^reset



<request>
<mode>2</mode>
</request>


at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
AT ^ SYSCFGEX = "00", 3FFFFFFF, 1,2,800C5 ,,





View attachment 1180751

salamat boss pero di ko masyado naintndhan, need ko ba baklasin ung modem? tpos ano ung flasher at ung pic na nbanggit mo boss?

 

[dellomc]

malinaw nmn yan ts buksan mo lng ang isipan gamit ng brain.exe
buksan mo yang modem mo kita mo sa picture ? pag dikitin mo lng yan
gamit ka ng wire or aluminum foil pra mas mbilis isipit mo lng dun sa dlawang bilog sa picture pra magdkit sila tAPOS plug in mo modem mo kapag umilaw ibig sabhin hndi sya nag dikit ulitin mo lng . hangang sa hndi na sya iilaw kpag nka plug tapos rekta kna sa balong .

refer na sa thread na to
http://www.symbianize.com/showthread.php?t=1370265&highlight=936

 

[monmonxD]

Buksan mo nalang yung modem, Testpoint jump sir. Sure yan. Tired and toasted na yan.

 

[cezaldz14]

Buksan mo nalang yung modem, Testpoint jump sir. Sure yan. Tired and toasted na yan.

ok boss, nagawa ko na lahat, pero nahinto ako sa huawei r215, checking download mode lng sya, ayaw nya magtuloy..

- - - Updated - - -

bka wala na sya usb mode. eto ts subukan mo hindi ako ang gumawa nyan copy paste ko lang nalimutan ko ung gumawa eh credits sa knya. hit thanks kung nkatulong



Preparation...

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset

3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,

7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,

at^sfm=0
at^reset



<request>
<mode>2</mode>
</request>


at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
AT ^ SYSCFGEX = "00", 3FFFFFFF, 1,2,800C5 ,,





View attachment 1180751

okay na sir, salamat ng marami.. naayos ko na modem ko, full admin na din, polkomtel firmware na ginamit ko, mas okay ako dun e, thanks ulet mga boss.. mabuhay po kayo hehe

 

[nabizkit]

sir ts san po ma - Locate usblsafe-b315.bin?

 

[MrNoName3123]

ok boss, nagawa ko na lahat, pero nahinto ako sa huawei r215, checking download mode lng sya, ayaw nya magtuloy..

- - - Updated - - -



okay na sir, salamat ng marami.. naayos ko na modem ko, full admin na din, polkomtel firmware na ginamit ko, mas okay ako dun e, thanks ulet mga boss.. mabuhay po kayo hehe

idol... anu OS mo ? sakin kc sinunod ko naman kaso dun nalang sa usb to usb nadedetect kaso di naiinstall sa device manager lumalabas unsuccesful

 

[nabizkit]

bat hindi ko ma detect com port

 

[giodegracia]

bka wala na sya usb mode. eto ts subukan mo hindi ako ang gumawa nyan copy paste ko lang nalimutan ko ung gumawa eh credits sa knya. hit thanks kung nkatulong



Preparation...

Plug flasher baklasin mo yung modem tingnan mo yung pic pag dikitin mo yung 1&2
Plug Power pag d umilaw bitawan muna pero kung umilaw ibig sabihin d nag dikit yung dalawang bilog ulit ka
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
type ati
- at^sfm=1
- at^reset

3. open Multicast pili ka ng gusto mong FW
unplug adaptor run multicast plug adaptor
4.WAIT mo Green Mode
open cid reader
5.at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

6.AT ^ SYSCFGEX = "030201", 3FFFFFFF, 1, 2, 800C5 ,,

7.AT ^ SYSCFGEX = "0302", 3FFFFFFF, 1, 2, 800C5 ,,

at^sfm=0
at^reset



<request>
<mode>2</mode>
</request>


at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
AT ^ SYSCFGEX = "00", 3FFFFFFF, 1,2,800C5 ,,





View attachment 1180751

salamat sa clear instructions! tanong lang. may lumalabas na update available pag inoopen ko 192.168.8.1, okay lang po ba e update?

 

[gerald janua]

kung ok ka naman sa gamit mong firmware sir
wag ka na mag update tru gui.
kung gusto mo man mag update ng firmware
reflash ka na lang.

yung mga hirap ma detect ang modem sa usb mode
hanap kayo polkomtel madali ma detect yun
yun kasing evo firmware
may bug ata
ayaw ma detect ng ports sa usb mode kahit magdamag kang magtutuwad.