wew na update ko na ung N93i ko to new firmware
additional info sa TUTS ni TS:
THIS ONLY APPLY SA MGA NAG KA ERROR
DURING FLASHING NA::::::::::::
if may problem kayo like DP1 or usb cant read from phone something like that or error na lumalabas during FLASHING here's the solution:
1.try to uninstall NOKIA PC SUIT contol panel/addremove
uninstall nokia connectivity cable (
BUT DONT DELETE PC CONNECTIVITY SOLUTION)
2. after na delete na ung stated sa no.1 remove usb cable sa pc then restart your PC
3.connect phone usb cable (choose PCSUIT) then it will prompt driver installation( i try sa pc win xp pero may error sa driver installation, but tested sa laptop win7 it run smoothly) better if have internet connection para mahanap nya driver easily.....
4.wait for the driver to finished with the driver installation.. when all done installing the driver remove your usb cable....
5. install PHOENIX software ung nasa 1ST page sa ng THREADS ni TS
6. after done installing dont open Phoenix
7. download firmware package ok din po ung download using NAVIFIRM pero compllicated po. firmware package see 1st page.
rationale: ( why firmware package): kasi if firmware package pag ka install mo direct na cya sa destination folder, while navifirm need mo pa e set ung folder duon sa phoenix.... i advise download the package ung bigay ni TS sa 1st page link..
8. extract the firmware that you downloaded sa path nato c: nokia/phoenix/product....default na po ang location nyan if you will install the FIRMWARE.
6. if done installing the firmwaRE proceed na po kayo sa STEP 4 yung sa TUTS ni TS sa 1st page ng threads
sorry walang sreenshot cp mode lng po ako
and this work on my phone 100% po FB nlng sa mag try
maraming salamat po kay TS sa useful threads nya