HUAWEI B315s-936 SOLUTION FOR POWER LED LIGHT ONLY(ME/ZAIN/POLKO V21.300)

[pangkolpangx28]

Sir may pag asa pa po ba mabuhay ang 936 ko if ung umiilaw na lang po is signal at lan light nya pero detected pa po ng pc..169 na xa...salamat po sir...

 

[myphoneA888]

Re: HUAWEI B315s-936 Solution for Light Only PROBLEM

Wow the best ka idol!!! sa lahat na procedure na sinubuka ko ito lang ang kumagat... Power talaga toturial mo Idol.... Maraming salamat ...

 

[wayneseares]

nabuhay uli modem ko. Thanks

 

[roelrsa]

mga sir questions lang kung pwede bang iset ang call and txt forwarding using huawei 936? para direct recieved ang txt and call sa isang specified number using cellphone.

thanks in advance

 

[sleide01]

ts docperks ...
pwede po ba mahingi yong firmware na signature pic mo.
yang dota po. marami salamat po ts.

 

[pndotzkie]

sir saan ung link ng e3256 nalilito ako eh

 

[puge]

Re: HUAWEI B315s-936 Solution for Light Only PROBLEM

BootRom select mo yung kay balong na *usblsafe-b315.bin*.

san mkikita yang usblsafe-b315.bin ts? na download ko ung balong pero wla naman ganyan na kasama

okay na pala ts nakita ko na thanks

- - - Updated - - -

View attachment 335626


pa help naman dito. Okay naman drivers nya sa device manager eh , problem lang bakit hindi sya lumalabas sa E3256sBootRomDownloadTool? kahit re open ko yung application ganun padin. Pa help thanks

 

[pndotzkie]

Re: HUAWEI B315s-936 Solution for Light Only PROBLEM

naayos ko na modem ko ts..salamat dito

 

[mvnapa]

Thank you Ts ma try nga heheh

 

[qualifax]

Salamat pala kina sir Pedik / sir rexzero sa kakabackread ko nakakuha tuloy ako ng idea.

Note #1: pag 98% na lang sa E3256sBootRomDownloadTool-2s then medyo matagal ibig sabihin failed(minsan may time na success kahit matagal)
base sa feedback ng iba, minsan 98% lang pero successful at napagana ng maayos modem.
Note #2: pag nag namatay na blue light then na parang nag refresh sa device manager ibig sabihin success may lalabas na success sa E3256sBootRomDownloadTool-2s

Saktong sakto po ito sa mga na stuck na sa zain/middle east/polko na v21.300


tools need:
1.balong usb downloader
https://routerunlock.com/download-huawei-balong-usb-downloader-1-0-1-10-gui/
https://github.com/forth32/balong-usbdload/blob/master/usblsafe_b315s.bin
2.B315 service software(galing sa huawei website)
http://download-c1.huawei.com/download/downloadCenter?downloadId=86886&siteCode=za
3.huawei firmware v21.311
http://consumer.huawei.com/za/support/smart-home/lte-router/b315s-936-za-sup.htm or https://routerunlock.com/?s=b315s
POLKO FIRMWARE V21.311.03.00.69
https://routerunlock.com/download-firmware-huawei-b315s-22-update-21-311-03-00-69-polkomtel-poland/
B315s latest firmware
http://www.symbianize.com/showthread.php?t=1428585&highlight=936
4.kape

trick no. 1
1.testpoint/jumper(wag open si balong).
2.isaksak male to male usb connector.
3.install driver galing sa *B315 service software* galing sa huawei website(dapat pangalan ng sa port is *HUAWEI Mobile Connect - DownLoad port*).
4.open si E3256sBootRomDownloadTool-2s then check BootRom select mo yung kay balong na *usblsafe-b315.bin*.
check firmware select kahit anong v21.311 then click next.
5.click Scan and Upgrade, hintayin nyo lang wag mainip .
6.observe, tignan sa Note sa taas kung alin ang behavior ng application / device, pag namatay ang blue light.
7.alisin ang male to male usb connector at power adaptor.
8.saksak power adaptor, pag nag blink lang yung power led light punta ka sa trick no.2

trick no. 2
1.testpoint/jumper.
2.isaksak male to male usb connector.
3.install driver galing sa *B315 service software* galing sa huawei website(dapat pangalan ng sa port is *HUAWEI Mobile Connect - DownLoad port*)
4.open balong usb downloader load mo yung *usbloader.bin* kasama ng E3256sBootRomDownloadTool-2s(mapapansin nyo nag load pero di na detect sa PC)
5.alisin ang male to male usb connector pati power then testpoint/jumper ulit
6.open si E3256sBootRomDownloadTool-2s then check BootRom select mo yung kay balong na *usblsafe-b315.bin*.
check firmware select kahit anong v21.311 then click next.
7.click Scan and Upgrade, hintayin nyo lang wag mainip .
8.observe, tignan sa Note sa taas kung alin ang behavior ng application / device, pag namatay ang blue light.
9.alisin ang male to male usb connector at power adaptor.
10.saksak power adaptor

pag di umubra try this one
http://www.symbianize.com/showthread.php?t=1431241&highlight=936
View attachment 1203874View attachment 1203875View attachment 1203876View attachment 1203877View attachment 1203878View attachment 1203879View attachment 1203880



View attachment 1203687View attachment 1203881View attachment 1204158

Update lang po nito kuya. Kasi po may B315s pa po ako sa bahay. Need ko updated info kung gagana pa po itong mga infos na kailangan ko. Thanks po.

 

[kingpin3]

Re: HUAWEI B315s-936 Solution for Light Only PROBLEM

thanks dahil sa thread mo na ayus ko modem ko...step 1 palang ok na hehe

 

[killuapika]

Re: HUAWEI B315s-936 Solution for Light Only PROBLEM

Bookmark muna. Magagamit ko din to pag nasira 936 ko. Tia ts

 

[YingJie]

salamat sa thred na to
marami na akong naipasok na firmware power led parin
kahit naipasok ko na ang code for command still power led parin
sa step 2 ko nadali

 

[PA TONTON]

Boss salamat ng marami working na ulet b315 ko sa trick 2 cya gumana godbless po

 

[LORDSymbian]

WORKING!

Nanggaling ako sa DEADBOOT tapos napunta ako dito. ngayon working na yung dalwang alaga ko

 

[btrex2100]

sir,

applicable ba ito sa b310s-927 stc/GO?

na brick na sobra sir, power led na lang din sya.

 

[skippah]

Mga bossing ask ko lang pag ba naka polkom firmware ako at pag dinala ko ung modem ko sa saudi gagana ba mga sim ng saudi sa modem ko? Thanks po sasagot.

 

[zardos04]

Maraming salamat sa TS sa thread at tutorials mo. Galing! keep it up!

 

[jayz090]

Sir @docperks

paano ba mag updated from polkom 21.311.03.00.69 to B315s-936_UPDATE_21.321.03.00.372.BIN or HUAWEI B315s-22 Firmware (21.321.03.01.983).rar
Galing ito sa Power Led Only.

saka po sa Trick no.2 meron kulang eh hindi ko magets

5.alisin ang male to male usb connector pati power then testpoint/jumper ulit -

AALISIN NA PO

6.open si E3256sBootRomDownloadTool-2s then check BootRom select mo yung kay balong na *usblsafe-b315.bin*.
check firmware select kahit anong v21.311 then click next. -

HINDI NA NAIBALIK OR NASAKSAK DITO

7.click Scan and Upgrade, hintayin nyo lang wag mainip .
8.observe, tignan sa Note sa taas kung alin ang behavior ng application / device, pag namatay ang blue light.
9.alisin ang male to male usb connector at power adaptor.
10.saksak power adaptor

 

[MyN88]

not working sa akin... wew sayang 936 ko... issue ng 936 ko power led only wont install driver at ilang minutes iilaw lahat led lights