- Messages
- 95
- Reaction score
- 1
- Points
- 28
Tips lang mga ka Mobi!
Baka may mga namomroblema sa inyo ng ganitong unit HUAWEI Y6 Pro 2019 (MRD-LX2) Unlock the Device to Continue
Eto nakita kong solusyon, at natest ko na ito ng ilang beses at masasabi kong tested, but but but, take your own risk padin syempre
Pakisundan nalag po ang procedure eto naman yung guide na nasa description nya
How to Bypass FRP/Google Lock from Huawei Y6 Prime 2019 MRD-LXF1/LX2 model:
First thing first, you need to download this file: http://*** BANNED LINK - DO NOT POST ***/DRO1
1. Disassemble phone (take out SIM tray, remove back cover, disconnect fingerprint flex)
2. Disconnect BATTERY !!!
3. Open SP_Flash_Tool_v5.1824_Win and select DA, Scatter and AUTH file as shown in the video tutorial
4. Go to Format Options and Select Manual Format, input Begin Address and Format length - check Y6_2019_FRP_WIPE.txt
5. Connect Test Point and USB cable to phone (DO NOT connect the cable on PC/Laptop for now)
6. Click Start on Format Options and Connect USB cable on PC/Laptop - MediaTek USB Port will appear now and FRP partition will be wiped
- If you see MediaTek Preloader Port instead, this means Test Point is wrong or it timed-out - TRY AGAIN.
- DO NOT FORMAT any other Partition or DO NOT ATTEMPT to Upgrade/Download firmware if your phone has ONLY FRP/Google Locked.
- This FRP/Google Lock Bypass procedure is RISK-FREE (if you follow it properly). However, I WILL NOT be held responsible for any brick.
- DO THIS ON YOUR OWN RISK, OF COURSE!
Sana po makatulogn kahit kaunti mga boss
P.S sana wala akong maviolate na rules
Nagmamahal
PulangKwento
Baka may mga namomroblema sa inyo ng ganitong unit HUAWEI Y6 Pro 2019 (MRD-LX2) Unlock the Device to Continue
Eto nakita kong solusyon, at natest ko na ito ng ilang beses at masasabi kong tested, but but but, take your own risk padin syempre
Pakisundan nalag po ang procedure eto naman yung guide na nasa description nya
How to Bypass FRP/Google Lock from Huawei Y6 Prime 2019 MRD-LXF1/LX2 model:
First thing first, you need to download this file: http://*** BANNED LINK - DO NOT POST ***/DRO1
1. Disassemble phone (take out SIM tray, remove back cover, disconnect fingerprint flex)
2. Disconnect BATTERY !!!
3. Open SP_Flash_Tool_v5.1824_Win and select DA, Scatter and AUTH file as shown in the video tutorial
4. Go to Format Options and Select Manual Format, input Begin Address and Format length - check Y6_2019_FRP_WIPE.txt
5. Connect Test Point and USB cable to phone (DO NOT connect the cable on PC/Laptop for now)
6. Click Start on Format Options and Connect USB cable on PC/Laptop - MediaTek USB Port will appear now and FRP partition will be wiped
- If you see MediaTek Preloader Port instead, this means Test Point is wrong or it timed-out - TRY AGAIN.
- DO NOT FORMAT any other Partition or DO NOT ATTEMPT to Upgrade/Download firmware if your phone has ONLY FRP/Google Locked.
- This FRP/Google Lock Bypass procedure is RISK-FREE (if you follow it properly). However, I WILL NOT be held responsible for any brick.
- DO THIS ON YOUR OWN RISK, OF COURSE!
Sana po makatulogn kahit kaunti mga boss
P.S sana wala akong maviolate na rules
Nagmamahal
PulangKwento
