- Messages
- 4
- Reaction score
- 0
- Points
- 16
MGA SIR MAY KWENTO AKO!
may fabtab po ako at mejo makalikot ako pagdating sa gadgets. now i tried supercharging this unit (to know more about supercharging check this: http://forum.xda-developers.com/showthread.php?t=991276), it was successfully supercharged kaso 50% lang, yung other 50% ay involved ang PC. i tried supercharging it 100% and stuck ako sa process na dapat ay charging mode lang sya and since may mga nauna na akong phones na na-100% supercharge, i tried running the supercharged scripts on the tablet which bricked my tablet (boot loop and state) kasi galing sa ibang unit yung scripts na yun,(by the way kahapon nangyari to =D) so with all that frustrations, i tried to fix this tablet. now it's working and 4.2.2 na ang android version ko. =)
gusto ko po sanang i-share ang ginawa ko baka sakaling makatulong, baka lang nmn
PERO! THIS DOESN'T GUARANTEE THAT THIS WILL WORK ON ALL DEVICES BECAUSE I'VE NOT TRIED IT TO OTHER FABTAB QUADRO 7 DEVICES pero bricked na rin naman kayo haha so nothing to worry about. PERO IT'S UP TO YOU PARIN...
Requirements:
1. your bricked unit
2. usb cable
3. clip (for resetting, i assume alam nyo na yung location ng reset ng tablet natin in case hindi nyo pa alam, it's right on the top, yung maliit na hole dun)
4. FabTAB QUADRO 7 firmware + flashing tools + drivers: http://www.fabtablife.com/downloads/download/12
5. PC (i used windows xp, windows 8.1 NOT WORKING!!! i think this will work fine on windows 7)
6. patience at common sense. =)
note: dapat at least 50% charged yung unit nyo, kung di kayo sure kung charged o hindi, plug nyo muna sa charger nya.
PROCESS:
1. turn on your device. let it stuck on the boot loader.
2. connect it on your PC open the RKBatchTool. when your device is connected, may makikita kayong color violet sa 1 under connected device. click switch; mamamatay dapat yung screen ng tablet nyo pero hindi talaga to nakapatay, then install the drivers. (i assume alam nyo na gawin yan: yung pupunta sa device manager tapos titignan yung may exclamation mark, i-right click, tapos manually browse yung drivers na nasa files na dinowload nyo sa taas.)
3. reboot PC, disconnect your tablet and reset it using your clip.
4. repeat step 1 and 2 pero skip installing the drivers kasi nga na-install nyo na. dapat green na ang kulay nung 1 under connected device. when it's green it means your ready.
5. locate the firmware path by clicking the button on the upper right side (the one with 3 dots).
6. when it's successfully loaded, click restore and wait for the process to finish.
antay antay konti and you're done!! viola!!! restored na ang fabtab nyo! at 4.2.2 pa ang JB version nyo,
i hope makatulong.
may fabtab po ako at mejo makalikot ako pagdating sa gadgets. now i tried supercharging this unit (to know more about supercharging check this: http://forum.xda-developers.com/showthread.php?t=991276), it was successfully supercharged kaso 50% lang, yung other 50% ay involved ang PC. i tried supercharging it 100% and stuck ako sa process na dapat ay charging mode lang sya and since may mga nauna na akong phones na na-100% supercharge, i tried running the supercharged scripts on the tablet which bricked my tablet (boot loop and state) kasi galing sa ibang unit yung scripts na yun,(by the way kahapon nangyari to =D) so with all that frustrations, i tried to fix this tablet. now it's working and 4.2.2 na ang android version ko. =)
gusto ko po sanang i-share ang ginawa ko baka sakaling makatulong, baka lang nmn
PERO! THIS DOESN'T GUARANTEE THAT THIS WILL WORK ON ALL DEVICES BECAUSE I'VE NOT TRIED IT TO OTHER FABTAB QUADRO 7 DEVICES pero bricked na rin naman kayo haha so nothing to worry about. PERO IT'S UP TO YOU PARIN...
Requirements:
1. your bricked unit
2. usb cable
3. clip (for resetting, i assume alam nyo na yung location ng reset ng tablet natin in case hindi nyo pa alam, it's right on the top, yung maliit na hole dun)
4. FabTAB QUADRO 7 firmware + flashing tools + drivers: http://www.fabtablife.com/downloads/download/12
5. PC (i used windows xp, windows 8.1 NOT WORKING!!! i think this will work fine on windows 7)
6. patience at common sense. =)
note: dapat at least 50% charged yung unit nyo, kung di kayo sure kung charged o hindi, plug nyo muna sa charger nya.
PROCESS:
1. turn on your device. let it stuck on the boot loader.
2. connect it on your PC open the RKBatchTool. when your device is connected, may makikita kayong color violet sa 1 under connected device. click switch; mamamatay dapat yung screen ng tablet nyo pero hindi talaga to nakapatay, then install the drivers. (i assume alam nyo na gawin yan: yung pupunta sa device manager tapos titignan yung may exclamation mark, i-right click, tapos manually browse yung drivers na nasa files na dinowload nyo sa taas.)
3. reboot PC, disconnect your tablet and reset it using your clip.
4. repeat step 1 and 2 pero skip installing the drivers kasi nga na-install nyo na. dapat green na ang kulay nung 1 under connected device. when it's green it means your ready.
5. locate the firmware path by clicking the button on the upper right side (the one with 3 dots).
6. when it's successfully loaded, click restore and wait for the process to finish.
antay antay konti and you're done!! viola!!! restored na ang fabtab nyo! at 4.2.2 pa ang JB version nyo,
i hope makatulong.
Last edited: