- Messages
- 421
- Reaction score
- 0
- Points
- 26
Hyperhidrosis is defined as an excessive and non physiological amount of sweat produced by the body. It can be a generalized situation where excessive sweating appears all over the body or focal hyperhidrosis where the excessive sweating is situated in areas such as the hands, palms, armpits, feet or the face.
Guys , share nio naman mga remedies nio para dito,
Sobrang nakaka abala talga itong sobrang pagpapawis kong kamay at paa, lalo na sa trabaho ko, Ginawa ko na lahat tulad ng pagbabad ng kamay sa maligamgam na tubig na may asin, pag lagay ng tawas at iba pa.. at yung pag ihi sa kamay ..
Kung nalunasan mo ang ganitong problema, share mu nman dito
THANKYOU IN ADVANCED !
UPDATE: FOR MAKING IMPROVISED IONTHOPORESIS for PALMAR and PLANTAR HYPERHIDROSIS .
UPDATE: 11/17/2013
pandagdag ideas lang mga ka HH ! , sa paggawa ng home made iontophoresis, ideas for your VOLTAGE source.
View attachment 144746View attachment 144745View attachment 144747
Guys , share nio naman mga remedies nio para dito,
Sobrang nakaka abala talga itong sobrang pagpapawis kong kamay at paa, lalo na sa trabaho ko, Ginawa ko na lahat tulad ng pagbabad ng kamay sa maligamgam na tubig na may asin, pag lagay ng tawas at iba pa.. at yung pag ihi sa kamay ..
Kung nalunasan mo ang ganitong problema, share mu nman dito
THANKYOU IN ADVANCED !
UPDATE: FOR MAKING IMPROVISED IONTHOPORESIS for PALMAR and PLANTAR HYPERHIDROSIS .
To all with hyperhidrosis or excessive palmar/plantar sweating. One recommended cure to lessen sweating is through Iontophoresis wherein a small amount of low DC voltage and current is applied on the sole of your palm and feet for a duration of 30-60 minutes.
How to make a make a DIY Iontophoresis
Materials
1. AC/DC converter
Input 220 VAC
Output 3 - 12 VDC
Wattage 3.0A
2 Alligator clip (to be placed at end of each stranded wire)
4 meter stranded wire AWG #12 (2 meter for each + /- terminal)
2 pcs. stainless tray 32" x 22"
2 pcs. plastic insulator 28" x 18" (plastic chicken wire)
Procedures:
1. Connect each piece of 2 mts.stranded wire to positive(+) and negative (-) terminal of AC/DC Converter;
2. Attached the alligator clip at the end of each output wire;
3. Place the plastic chicken wire as insulator on top of stainless tray to prevent direct contact of skin on metal;
4, Pour tap water on both trays just enough to submerge the side of cuticle;
5. Connect the alligator clips on each side of the tray, (CAUTION: Do not let each tray to touch each other to prevent short circuit);
6. Plug the Converter to 220VAC outlet, adjust the output VDC to tolerable voltage (you may start at 6V increasing to 12 V;
7. Place each palm on each tray, placing both hands on separate tray will complete the electrical circuit;
8 While both hands are submerged on water, a prickling sensation will be felt at the bottom f your palm;
9.Change polarity of electricity per half of session , example 1st 15 mins left-positive right-negative 2nd 15 mins left negative, right positive;
10. Same process in curing feet (plantar sweating);
11. Treatment should be done 7-10 consecutive days for 30-60 mins.,result may be noticeable on the 5th session;
12. After the last session, a weekly maintenance is needed to maintain dryness.
My sweating was reduced to about 95% on the 5th session and to almost 98% after the 8th session at 12 VDC during the entire 60 minutes per session.
The only permanent cure for plantar sweating is surgery with the risk of compensating perspiration (CP) that may appear on other parts of the body.
Hope this help our brother and sister affected by this abnormalities.
Good luck to all
Alligator clip with wire
http://dinca.org/wp-content/uploads/2009/07/AlligatorClipLead5Color1602-3031_M3.jpg
Aluminum tray
http://img.diytrade.com/cdimg/743255/6108333/0/1213252215/aluminum_foil_tray.jpg
Eto naman yung ac/dc adapter
http://media.wholesale-electrical-e...10100918/44140b862d0384b42cf5f6df19fbffac.jpg
Putulin niyo lang yung dulo ng adapter at i-replace niyo yung alligator clip doon. RED po ang positive terminal at BLACK yung negative terminal.
Eto lang yung binili ko: 9V Eveready Battery, 2 pairs ng alligator clip(yung maliit lang), Solid wire (yung maliit lang), and Aluminum tray. Yung Alligator clip, battery, tsaka wire, sa electronics store mo bilhin. Yung tray meron sa grocery. Gusto ko sanang gumamit ng adapter kaso di ako sure sa current eh. Nasa 500mA kasi. Sabi sa internet 100 lang fatal na.
Edit: Bili na lang kayo ng Adapter. Mas mura at tipid pa. Sa electronics store din meron nyan. Below 200php lang yan.
After 4 days ng use eh nabawasan na ng konti. Kung dati eh tulo-tulo, ngayon parang moist na lang. Effective 'to!
Edit: Naliwanagan na din ako sa wakas! Safe naman pala gumamit ng adapter at mas makakatipid ka kesa paulit-ulit na bumili ng battery. Ganito kasi yun, yung adapter ay may adjustable na voltage. Usually from 3-24V tapos may current na 500mA. Naguluhan ako sa 500 na yan. Yun pala ay yan yung maximum na current na maidedeliver ng adapter. Yung actual na current na dadaloy ay depende sa resistance ng katawan natin. Example, ang resistance ng wet body eh nasa 17kiloohms, kung i-aaply natin yung ohm's law na I=E/R at ginamit natin yung 24V, 24/17,000=0.706 mA. Napakaliit nyan para maging fatal kasi nga nasa 100 ang fatal. BTW, Electronics Engineering student po ako.
UPDATE: 11/17/2013
pandagdag ideas lang mga ka HH ! , sa paggawa ng home made iontophoresis, ideas for your VOLTAGE source.
View attachment 144746View attachment 144745View attachment 144747
Attachments
Last edited: