Mga IT jan ng SMB (small medium business) company pasok!

[takash07]

anyone po na my alam para ma trace yung license ng windows 10 pro

try mo eto sa CMD (Run as Administrator)

slmgr /xpr

- - - Updated - - -

Mga sir pa help po ako new i.t lng po ako ask lng po sana ko anu free file sharing po gamit nyo na pde maglagay ng security sa documents like pagmy buburahin sa word documents or exel dapat si admin lng ang pde magbura or dapat my password pa ng admin para mabura..
Un tipong my restricted acces po sa mga ducuments sir anu kya pde gamitin sir ty.. parang tulad sa mga pos sa grocery sir pag my ivovoid need pa ng manager bago mavoid un item.. gnun un gusto sa office nmin mga boss any idea po? Ty

much better sir magPurchase na lang kayo ng NAS (2TB) mas ok pa gamitin kesa magCloud base ka na File Server. bsta meron kang Firewall at Managed Switch good ka jan sa NAS na yan.

 

[BakalngPersan]

meron ba kayo link para sa iperius backup mga sir

 

[batangmaligno]

Guys may nakuha na kong server, patulong naman sa implementation from scratch kaya lang need ko mag virtualize para madali yung recovery in the future kaya lang wala pa kong experience panu ba simulan to? need ko rin ng failover sa mga roles na nabanggit ko sa baba. meron ba kayong guide jan yung recommended plan? ex. 2x dhcp na magkaiba ng assigning range. At madali lang ba mag pass recovery ng cisco stacked switch mga sir?

Virtualization: Hyper-V
Roles needed: AD/DC, Printing server, DHCP at DNS
OS: win server 2012 standard edition (vol license)
HARDWARE: Dell R730 Intel Xeon 2609 v3 (1.90 ghz)
SAS: 6TB Enterprise Ed. 7200 rpm
RAM: 24 GB
NIC: 4 SLOTS

Spare 1: Dell R300 Edge with 6GB RAM, 200GB HDD at 2.40ghz
Spare 2:: Dell R300 Edge with 2GB RAM 200GB HDD at 2.40ghz

 

[ToyCar]

Guys may nakuha na kong server, patulong naman sa implementation from scratch kaya lang need ko mag virtualize para madali yung recovery in the future kaya lang wala pa kong experience panu ba simulan to? need ko rin ng failover sa mga roles na nabanggit ko sa baba. meron ba kayong guide jan yung recommended plan? ex. 2x dhcp na magkaiba ng assigning range. At madali lang ba mag pass recovery ng cisco stacked switch mga sir?

Virtualization: Hyper-V
Roles needed: AD/DC, Printing server, DHCP at DNS
OS: win server 2012 standard edition (vol license)
HARDWARE: Dell R730 Intel Xeon 2609 v3 (1.90 ghz)
SAS: 6TB Enterprise Ed. 7200 rpm
RAM: 24 GB
NIC: 4 SLOTS

Spare 1: Dell R300 Edge with 6GB RAM, 200GB HDD at 2.40ghz
Spare 2:: Dell R300 Edge with 2GB RAM 200GB HDD at 2.40ghz

dhcp na magkaiba ng range? mahirap yan baka magconflict ka pa since un expected mo na pupunta sa isang dhcp eh sa isang dhcp napunta.

better to do pdc (primary domain controller) then bdc (backup domain controller); install ad, dns, dhcp roles. have bdc be a backup/replication server of pdc. in this case, magoffline man si pdc, sasaluhin ka ni bdc.

print server pwede mo install kay bdc.

 

[batangmaligno]

dhcp na magkaiba ng range? mahirap yan baka magconflict ka pa since un expected mo na pupunta sa isang dhcp eh sa isang dhcp napunta.

better to do pdc (primary domain controller) then bdc (backup domain controller); install ad, dns, dhcp roles. have bdc be a backup/replication server of pdc. in this case, magoffline man si pdc, sasaluhin ka ni bdc.

print server pwede mo install kay bdc.

mag conflict pala,so pwede kong ilagay lahat ng roles sa pdc except yung print server? tapos yung bdc ko ibang physical server then lahat ng roles or mag conflict din yung dhcp nito?

 

[ToyCar]

mag conflict pala,so pwede kong ilagay lahat ng roles sa pdc except yung print server? tapos yung bdc ko ibang physical server then lahat ng roles or mag conflict din yung dhcp nito?

as long as replicated/backup setting si bdc kay pdc hindi mag conflict yan. since parehas ang laman nila.

pwede ka naman multi range sa dhcp server, then sa switch na lang using ip helper kukuha ng ip distribution

 

[batangmaligno]

as long as replicated/backup setting si bdc kay pdc hindi mag conflict yan. since parehas ang laman nila.

pwede ka naman multi range sa dhcp server, then sa switch na lang using ip helper kukuha ng ip distribution

salamat sa payo, nakapag try ka na ba mag password recovery ng switch? production switch pa naman walang nakakaalam ng password nun kahit sa headoffice.

 

[ToyCar]

salamat sa payo, nakapag try ka na ba mag password recovery ng switch? production switch pa naman walang nakakaalam ng password nun kahit sa headoffice.

hindi ba kaya reset to factory settings? then re-configure ulit bawat port?

 

[batangmaligno]

hindi ba kaya reset to factory settings? then re-configure ulit bawat port?

naka stack sya 4 ksama master, madali lang ba yun?

 

[ToyCar]

naka stack sya 4 ksama master, madali lang ba yun?

normally ang password is per switch naka set. so per switch mo sya ire-reset. kung enterprise switch yan, pwede mo ma reset through console command

 

[batangmaligno]

normally ang password is per switch naka set. so per switch mo sya ire-reset. kung enterprise switch yan, pwede mo ma reset through console command

baka mawala kasi yung configuration kaya di ako nag attempt same scenario nito pero never ko pa nagawa sa stacked sa standalone madali lang http://www.firewall.cx/cisco-techni...catalyst-3750-x-3560-x-password-recovery.html

 

[mabaskog]

Anyone na gumagamit na ng GPON at Sangfor HCI?

 

[justasking]

Question lang..

From 192.168.1.0 network, may way ba para makita ko ung mga assigned ip (most likely dhcp) ng clients sa 192.168.3.0 network?

192.168.1.0 network can ping 192.168.3.0 network. Ibig sabihin may route / connectivity sila.

Gumamit ako ng nmap / zenmap pero si 1.0 network lang nakikita ko.

View attachment 374011

 

[CBMyum]

Question lang..

From 192.168.1.0 network, may way ba para makita ko ung mga assigned ip (most likely dhcp) ng clients sa 192.168.3.0 network?

192.168.1.0 network can ping 192.168.3.0 network. Ibig sabihin may route / connectivity sila.

Gumamit ako ng nmap / zenmap pero si 1.0 network lang nakikita ko.

View attachment 1300069

check your subnet mask

 

[gersoncarlo]

pa bm, thanks

 

[galwan14]

Mga Master, anung gamet nyo na backup software for esxi vmware free edition, sana free backup software din, TIA

 

[ToyCar]

Mga Master, anung gamet nyo na backup software for esxi vmware free edition, sana free backup software din, TIA

veeam. meron yan free, yung community edition.

 

[galwan14]

thank you master

 

[Efi1000cc]

Guys need help kakalipat ko lang ng hosting ng website, now i created a new mail on the cpanel, upon testing the newly created email add
i recieved this error
This message was created automatically by mail delivery software.

A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:

[email protected]
host mail.domain.com
SMTP error from remote mail server after RCPT TO:<[email protected]>:
550-Please turn on SMTP Authentication in your mail client. mail.domain.com
550-:33358 is not permitted to relay through this server
550 without authentication.

 

[ToyCar]

Guys need help kakalipat ko lang ng hosting ng website, now i created a new mail on the cpanel, upon testing the newly created email add
i recieved this error
This message was created automatically by mail delivery software.

A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:

[email protected]
host mail.domain.com
SMTP error from remote mail server after RCPT TO:<[email protected]>:
550-Please turn on SMTP Authentication in your mail client. mail.domain.com
550-:33358 is not permitted to relay through this server
550 without authentication.

what exactly are you trying to accomplish?