New 936 Openline

[revlon0007]

parang ganito lang

View attachment 281521

w/telnet access

View attachment 281522

 

[redpoison12]

parang ganito lang

View attachment 1145283

w/telnet access

View attachment 1145284

galing talaga ni master digong... Idol!

 

[travisguyz]

parang ganito lang

View attachment 1145283

w/telnet access

View attachment 1145284

share boss please maraming salamat

 

[rixjin]

uhmmmmmmmmmmm,,,,,,,,,,,,,,

 

[John1329]

Un oh ilalabas na

- - - Updated - - -

Ilalabas na ata ah?

 

[smile]

Nailabas na sa fb ang tut

 

[mark laurence tanig]

Nailabas na sa fb ang tut

san po sir ?pa link po

 

[choichoi06]

up up up up

 

[cylinder]

Ilabas mo na tol wag puro pa asa

atat kana kasi

 

[dackonblakblade]

sana totoo para di madismaya mga naga-abang at umaasa...

 

[zhed1324]

pa subscibe..

 

[chukchanero]

up for TS hope this is true

 

[Roydan]

Preparation...

Plug flasher
Plug Power
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
- at^sfm=1
- at^reset
3. Multi Tools flashing ng gusto mong FW
4.WAIT mo Green Mode
sa AT command sender (Bilog)
5. at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
at^sfm=0
at^reset
6. Done

Hard reset

 

[knokphil-jake]

Preparation...

Plug flasher
Plug Power
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
- at^sfm=1
- at^reset
3. Multi Tools flashing ng gusto mong FW
4.WAIT mo Green Mode
sa AT command sender (Bilog)
5. at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
at^sfm=0
at^reset
6. Done

Hard reset

pre saan, pwede kukuha ng mga files?

 

[cristan0729]

Preparation...

Plug flasher
Plug Power
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
- at^sfm=1
- at^reset
3. Multi Tools flashing ng gusto mong FW
4.WAIT mo Green Mode
sa AT command sender (Bilog)
5. at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
at^sfm=0
at^reset
6. Done

Hard reset

boss pa link ng mga files please... mukhang ito na ang totoo.. hehe

 

[4mdvo]

Preparation...

Plug flasher
Plug Power
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
- at^sfm=1
- at^reset
3. Multi Tools flashing ng gusto mong FW
4.WAIT mo Green Mode
sa AT command sender (Bilog)
5. at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
at^sfm=0
at^reset
6. Done

Hard reset

eto na e2 na.... hahahaha,,, lumabas din,,, follow up ko lang,,, ung isang tut...
credit sa owner ng tut at files....

http://www.symbianize.com/showthread.php?t=1370045

 

[knokphil-jake]

preparation...

Plug flasher
plug power
plug usb


1. Open balong usb downloader
- click detect
- locate usblsafe-b315.bin
- load
- pag 100% na close.

2. Open firmware folder
- click go_hdlc
- enter

3. Open huawei r215 flash
- locate 3g pc ui interface (select)
- flash
- locate .hmf file
- antayin na may nakasulat na done/remove battery and put it again..
- close

4. Unplug power, unplug usb, unplug flasher

5. Plug power chord, plug lan cable

6. Sign in 192.168.8.1 admin/admin

unlocking sim

1. Open b315s toolbox
- admin admin
- api control
- api/device/mode
<request>
<mode>2</mode>
</request>
- write directly to api
- click debug, check kung ang response ay ok

2.open telnet
- telnet 192.168.8.1
- at^sfm=1
- at^reset
3. Multi tools flashing ng gusto mong fw
4.wait mo green mode
sa at command sender (bilog)
5. At ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
at^sfm=0
at^reset
6. Done

hard reset

CONFIRMED!!!! ito po ang tamang procedure...
Maraming salamat sa post na ito...

Nakita ko rin ang sagot... ^_^

 

[chivs94]

CONFIRMED!!!! ito po ang tamang procedure...
Maraming salamat sa post na ito...

Nakita ko rin ang sagot... ^_^

panu yung flasher boss?

 

[carlyl21]

Preparation...

Plug flasher
Plug Power
Plug USB


1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate .hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

5. Plug Power Chord, Plug LAN cable

6. Sign in 192.168.8.1 admin/admin

Unlocking sim

1. Open B315s toolbox
- admin admin
- API Control
- api/device/mode
<request>
<mode>2</mode>
</request>
- Write Directly to API
- Click Debug, check kung ang response ay OK

2.Open telnet
- telnet 192.168.8.1
- at^sfm=1
- at^reset
3. Multi Tools flashing ng gusto mong FW
4.WAIT mo Green Mode
sa AT command sender (Bilog)
5. at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
at^sfm=0
at^reset
6. Done

Hard reset

p Attached nman po ng FILES sir

slamat po ng marami..

 

[bhemboyshouse]

hmf