Good afternoon alam naman po nating lahat na ang mga android phones po natin ay hindi po nakaka connect sa default wifi ng mga windows 7 kaya po itong thread na ito ang tutulong sa inyo para maka konekta kayo
Anyway marami po'ng salamat kay HARSHA RAJ dahil sa kaniya ko ito natutunan
Tested ko na po ito sa akin pong SAMSUNG GALAXY S DUOS and SAMSUNG GALAXY SIII MINI
pasensya na po english po itong tutorial na ito dahil alam naman natin na hindi lang pilipino ang mga unggoy sa symbianize ay este tao hehe
1. Introduction:
-This guide is for those who do not have a Wi-Fi router in their network. The guide will teach you how to access the internet in your Android device, where by the internet is only accessible in your Laptop though LAN.
-Before when Galaxy S2 had Gingerbread, there was a modified WPA_Supplicant here. However it does not work with ICS and above and no one else have come up with a updated mod.
-However if you have Windows 7/8 [does not work in XP] then you can try setting up a Virtual Wi-Fi adapter which works as good as a WI-Fi access point.
-There are many other ways like Connectify and other softwares, but they have not worked for and more over why to bloat the system when there is a native feature support in PC.
-There is another alternate called reverse tethering. But that will require root and it only works for me sometimes. More like when I get lucky. You can try this app or this guide.
2. Requirements:
a. Windows 7/8
b. Administrative access for Windows PC
c. Wi-Fi enabled Laptop or an Desktop with Wi-Fi adapter
3. Steps:
Step 1:Press start and typecmdand right click on it click on "Run as Administrator"
Step 2:Typenetsh wlan set hostednetwork mode=allow ssid=NAMEkey=PASSWORD and press enter
Note:NAME is the name which you want to give for the WI-Fi accesspoint and PASSWORD is the security key which is required for accessing the Wi-Fi AP in Android device. Also the password should be at least 8 character long.
Now wait till you get three sets of line confirming the command as attached in screen shot. It sometimes may take around a minute
Step 3: Type netsh wlan start hostednetwork and press enter. You will again get a confirmation message. By this step the new Wi-Fi access point will be broadcasting and when you scan it in you Android device it will appear in the list
Step 4: There is one more step to make the internet pass through the newly created Wi-Fi access point. The internet should be shared via LAN adapter. To do that follow the steps as below:
a. Start -> Run (or press Windows key + R)
b. Type ncpa.cpl and press enter
c. You will see Network Connections now
d. Here you will find a new network adapter called "Microsoft Virtual WiFi Miniport Adapter". This one is created when the "Step 3" is done as above. Note down the connection name. In my case it is "Wireless Network Connection 2"
e. Now identify the one which is connected to your LAN network where internet is accessed (this can be LAN adapter, WiFi adapter or even dialup connection in case of tethering)
f. Double click on that connection identified under step (e)
g. Click on "Properties"
h. Click on "Sharing" tab
i. Tick on "Allow other network users to connect through this computer's Internet Connection"
j. Under the drop down list for "Home networking connection" select "Wireless Network Connection 2" [or which ever it is in your case]
k. Click on OK and close all the dialogue boxes
Step 5: Now scan for Wi-Fi in your Android device and you can find the Wi-Fi with whatever SSID you created. Connect to it and enjoy the LAN internet in your device.
Note: If you wish to turn off the Wi-Fi AP you created then you can type netsh wlan stop hostednetwork in the command prompt and press enter. The next time you restart your PC you can directly do the "Step 3" above and you are good to go.
Also you if you wish to change the SSID and/or password later do only the "Step 2" and "Step 3" as above.
Marami pong mga problems dito kaya ipost niyo lang ang problem at feedback kayo kung working sa inyo
PAKIREPUTE NA LANG PO AT FEEDBACK OKEY NA AKO
Anyway marami po'ng salamat kay HARSHA RAJ dahil sa kaniya ko ito natutunan
Tested ko na po ito sa akin pong SAMSUNG GALAXY S DUOS and SAMSUNG GALAXY SIII MINI
pasensya na po english po itong tutorial na ito dahil alam naman natin na hindi lang pilipino ang mga unggoy sa symbianize ay este tao hehe
1. Introduction:
-This guide is for those who do not have a Wi-Fi router in their network. The guide will teach you how to access the internet in your Android device, where by the internet is only accessible in your Laptop though LAN.
-Before when Galaxy S2 had Gingerbread, there was a modified WPA_Supplicant here. However it does not work with ICS and above and no one else have come up with a updated mod.
-However if you have Windows 7/8 [does not work in XP] then you can try setting up a Virtual Wi-Fi adapter which works as good as a WI-Fi access point.
-There are many other ways like Connectify and other softwares, but they have not worked for and more over why to bloat the system when there is a native feature support in PC.
-There is another alternate called reverse tethering. But that will require root and it only works for me sometimes. More like when I get lucky. You can try this app or this guide.
2. Requirements:
a. Windows 7/8
b. Administrative access for Windows PC
c. Wi-Fi enabled Laptop or an Desktop with Wi-Fi adapter
3. Steps:
Step 1:Press start and typecmdand right click on it click on "Run as Administrator"
Step 2:Typenetsh wlan set hostednetwork mode=allow ssid=NAMEkey=PASSWORD and press enter
Note:NAME is the name which you want to give for the WI-Fi accesspoint and PASSWORD is the security key which is required for accessing the Wi-Fi AP in Android device. Also the password should be at least 8 character long.
Now wait till you get three sets of line confirming the command as attached in screen shot. It sometimes may take around a minute
Step 3: Type netsh wlan start hostednetwork and press enter. You will again get a confirmation message. By this step the new Wi-Fi access point will be broadcasting and when you scan it in you Android device it will appear in the list
Step 4: There is one more step to make the internet pass through the newly created Wi-Fi access point. The internet should be shared via LAN adapter. To do that follow the steps as below:
a. Start -> Run (or press Windows key + R)
b. Type ncpa.cpl and press enter
c. You will see Network Connections now
d. Here you will find a new network adapter called "Microsoft Virtual WiFi Miniport Adapter". This one is created when the "Step 3" is done as above. Note down the connection name. In my case it is "Wireless Network Connection 2"
e. Now identify the one which is connected to your LAN network where internet is accessed (this can be LAN adapter, WiFi adapter or even dialup connection in case of tethering)
f. Double click on that connection identified under step (e)
g. Click on "Properties"
h. Click on "Sharing" tab
i. Tick on "Allow other network users to connect through this computer's Internet Connection"
j. Under the drop down list for "Home networking connection" select "Wireless Network Connection 2" [or which ever it is in your case]
k. Click on OK and close all the dialogue boxes
Step 5: Now scan for Wi-Fi in your Android device and you can find the Wi-Fi with whatever SSID you created. Connect to it and enjoy the LAN internet in your device.
Note: If you wish to turn off the Wi-Fi AP you created then you can type netsh wlan stop hostednetwork in the command prompt and press enter. The next time you restart your PC you can directly do the "Step 3" above and you are good to go.
Also you if you wish to change the SSID and/or password later do only the "Step 2" and "Step 3" as above.
Marami pong mga problems dito kaya ipost niyo lang ang problem at feedback kayo kung working sa inyo
PAKIREPUTE NA LANG PO AT FEEDBACK OKEY NA AKO
Last edited:
