question about undervolting.

[teamzz]

hello po kabibili ko lang po ng asus tuf fx505dt 512gb ssd, 8gb ram nvidia 1650 laptop tapos po inupgrade ko ng 1tb hdd at dinagdagan ko ram so total is 16gb ram at 512 ssd +1tb hdd
. kaso po nagtthrottle at times pagnaglalaro ako ng cs go ginawa ko na po lahat at bumili pa ko ng cooling pad pero wa effect so ang last resort ko is undervolting. ginawa ko na po ask ko lng po kung tama..


Ask ko lang po anong difference ng undervolt sa underclock. at tama po ba ung ginawa ko? may nagturo po sakin pero ask ko lng baka po pwede pa iundervolt pa. View attachment 381042View attachment 381043

ang gamit ko po pangundervolt is msi afterburner and gpuz pangcheck. both set up po current while running heaven benchmark



salamat po sa makakatulong

 

[cornibus]

Throttling in CPU or GPU is basically caused by non other than - heat. Yan kung bakit naglabasan ang ibat-ibang klaseng fan-based and water-based cooler. Unfortunately in your case TS you're using a laptop. Not because it's called a "gaming" laptop doesn't mean it will be able to dissipate all the heat inside the way a real gaming desktop does. It just doesn't have the room for that.

Now to your question, "anong difference ng undervolt sa underclock?" Undervolting is as you know, kapag nilower down mo yung voltage ng isang component tulad ng CPU or GPU from its normal setting. Underclocking naman is kapag nilower down mo yung clock ratio, FSB, or frequency ni CPU or GPU. Both are normally just called "underclocking" since kapag nag undervolt ka, normally bumababa din yung clock speed.

Ingat lang TS kasi unlike sa overclocking kung saan kapag nasobrahan na si CPU (or GPU) magpifail lang sya at normally magrireset. Sa underclocking, when the component fails, in most cases it causes real damage sa chip mismo. That's why mas delikado mag underclock kesa mag overclock. And if you're going to do it on a CPU, the safest way would be through the BIOS.

 

[teamzz]

ganun po ba? ang nabasa ko po kasi sa lahat ng site at reference na nakita ko walang bad effect ang undervolting dahil pwede mareset pero ang overclock ung nakakasira kasi nga masnaggegenerate ng heat. Ask ko lng po. Ano po ba ung magandang setting for undervolting sa unit ko? actually umayos naman na ung unit ko. di ko po kasi alam saan ko iaadjust ung graph ko. di ko kasi alam kung saang voltage ako magsisimula magstop magincrease. sabi kasi nila 896v ang laptop gtx 1650 tapos 1395-1560 mhz freq.... dapat po ba jan lang maglalaro ung value ko sa graph?? sorry po noob tlga ko want ko lng magundervolt ayaw ko mag overclock

 

[cornibus]

ganun po ba? ang nabasa ko po kasi sa lahat ng site at reference na nakita ko walang bad effect ang undervolting dahil pwede mareset pero ang overclock ung nakakasira kasi nga masnaggegenerate ng heat... actually umayos naman na ung unit ko.

Obviously you did it right, kaya nasabi mo na ayos naman yung unit mo. Yung "bad effect" na tinutukoy ko is kapag nagkamali ka sa settings mo. Sa "over" kasi kapag nagkamali ka the chip should be able to reset back, because it's by design. Pero sa "under" kapag nagkamali ka, there's a high risk na masira sya since most modern chips are not designed to do that. Why? Because manufacturers knows around 98% of CPU/GPU tweakers do "over" and much less users does "under"