Re: Standalone network (pfsense/disk1 +lusca cache/disk2) =1
opo. mag kakaroon kasi ng error ung pfsense kung inde proper shutdown lagi. much better shutdown muna ung pfsense.
- - - Updated - - -
Perform this commands throught the diagnostics>execute command
1. shutdown proxy service by running in command prompt
squid -k shutdown
2. move & rename /Var/squid/cache to /var/squid/cache.old (to delete this later)
mv /var/squid/cache /var/squid/cache.old
3. Reinitialized Squid/Lusca with this command;
squid -z
(to check if the command worked, go to Diagnostics-->Edit File, browse /var/squid/cache, if you can see "cache & cache.old" folder then you have successfully reinitialized) otherwise if you can only see cache.old, use the method below
Navigate to Services--->Proxy Server -->Cache ManagementClick "Save" at the bottom and wait while the page is reloadingcheck again if cache folder exist, go to Diagnostics-->Edit File, browse /var/squid/cache, if you can see "cache & cache.old" folder then you have successfully reinitialized) youmay proceed to the next step
4. Run the Squid/Lusca service
squid
4. Delete the renamed cache directory (cache.old)
The old directory and its content will be deleted while your proxy server is still running.
rm -rf /var/squid/cache.old
5. If needed restart your pfsense server if it is not hitting anything
sana makatulong
cge po try ko yn. my dinadownload pa kc ung kpatid ko. . teka po. bgo po ba e restart ung pc. e shutdown ko muna ung VM ko? 1 lng kc pc ko.
opo. mag kakaroon kasi ng error ung pfsense kung inde proper shutdown lagi. much better shutdown muna ung pfsense.
- - - Updated - - -
cge po try ko yn. my dinadownload pa kc ung kpatid ko. . teka po. bgo po ba e restart ung pc. e shutdown ko muna ung VM ko? 1 lng kc pc ko.
nga po pla. pano po kong npuno na ung cache ko. pano e delete?
Perform this commands throught the diagnostics>execute command
1. shutdown proxy service by running in command prompt
squid -k shutdown
2. move & rename /Var/squid/cache to /var/squid/cache.old (to delete this later)
mv /var/squid/cache /var/squid/cache.old
3. Reinitialized Squid/Lusca with this command;
squid -z
(to check if the command worked, go to Diagnostics-->Edit File, browse /var/squid/cache, if you can see "cache & cache.old" folder then you have successfully reinitialized) otherwise if you can only see cache.old, use the method below
Navigate to Services--->Proxy Server -->Cache ManagementClick "Save" at the bottom and wait while the page is reloadingcheck again if cache folder exist, go to Diagnostics-->Edit File, browse /var/squid/cache, if you can see "cache & cache.old" folder then you have successfully reinitialized) youmay proceed to the next step
4. Run the Squid/Lusca service
squid
4. Delete the renamed cache directory (cache.old)
The old directory and its content will be deleted while your proxy server is still running.
rm -rf /var/squid/cache.old
5. If needed restart your pfsense server if it is not hitting anything
sana makatulong