- Thread Starter
- #321
Re: Unlock new ZTE MF627 FULL GUIDE MAS MADALI NAH....
Updated ko lng sa mga nd parin makakuha,.xenxa na ngaun lng ulit ako nkalog d2
try this,,...
Final
procedure..
if your Zte modem is version 0b04,
1: downgrade your modem from 0b04 to 0b02, use this tools and firmware( QPST at smartbro_v2l
note: kapag natapos nyo na idowngrade, tanggal at ibalik uli ang modem sa PC para sa sunod na procedure,
2: plug in the modem v 0b02, then open the UNLOCKER (note : don't hit the dwngrade tab) minimize nyo lang...
3: GOTO C:\Program Files\Windows Service\MF100newversion fo;der & DELETE ALL FILES...KAILANGANG WALANG MATIRA :-O
[/B]
4: DOWNLOAD this firmware PATCH FIRMWARE then extract AND COPY ALL FILES AND PASTE IT TO C:\Program Files\Windows Service\MF100newversion folder & and remember to close all folder before doing step 5......
5;TICK DOWNLOAD BUTTON AND WAIT TILL FINISH ,
(note) after finish, plug out the modem and uninstall all files of smartbro on your PC..
6: plug in the modem then install and test with other sim.
7: if you like the dashboard sandbox, follow this.......
open the QPST
eto ung SANDBOX DASHBOARD
STEPS:
1. run QPST configuration
2. tick add new port
3. tick USB/QC Diagnostic then tick OK
4. tick start clients choose EFS EXPLORER then tick OK
5. just delete and drag&drop the ZTEMODEM.ISO that you download before then close
then finish may bagong dashboard kana.........
palitan lang ung ZTEMODEM.ISO 100% unlocked m0dem nio..
Updated ko lng sa mga nd parin makakuha,.xenxa na ngaun lng ulit ako nkalog d2
try this,,...
Final
procedure..
if your Zte modem is version 0b04,
1: downgrade your modem from 0b04 to 0b02, use this tools and firmware( QPST at smartbro_v2l
note: kapag natapos nyo na idowngrade, tanggal at ibalik uli ang modem sa PC para sa sunod na procedure,
2: plug in the modem v 0b02, then open the UNLOCKER (note : don't hit the dwngrade tab) minimize nyo lang...
3: GOTO C:\Program Files\Windows Service\MF100newversion fo;der & DELETE ALL FILES...KAILANGANG WALANG MATIRA :-O
[/B]
4: DOWNLOAD this firmware PATCH FIRMWARE then extract AND COPY ALL FILES AND PASTE IT TO C:\Program Files\Windows Service\MF100newversion folder & and remember to close all folder before doing step 5......
5;TICK DOWNLOAD BUTTON AND WAIT TILL FINISH ,
(note) after finish, plug out the modem and uninstall all files of smartbro on your PC..
6: plug in the modem then install and test with other sim.
7: if you like the dashboard sandbox, follow this.......
open the QPST
eto ung SANDBOX DASHBOARD
STEPS:
1. run QPST configuration
2. tick add new port
3. tick USB/QC Diagnostic then tick OK
4. tick start clients choose EFS EXPLORER then tick OK
5. just delete and drag&drop the ZTEMODEM.ISO that you download before then close
then finish may bagong dashboard kana.........
palitan lang ung ZTEMODEM.ISO 100% unlocked m0dem nio..