vicidial/ goautodial voip server.. open natin to

[lohen]

opo pwede po sya pwede nyo idownload ang vicibox iso. Vici Isoinstall the OS then run vicidal-install it will guide in installing and assigning servers. May guide din po na pwedeng idownload s link n binigay ko you can also post your questions dito s thread n to http://www.symbianize.com/showthread.php?t=1218124 if you like .

dapat pa po bang iinstall ung vicibox express? at ano po ung ARCHIVE? ano po use nun?
Salamat po sa pagsagot.

 

[kojiromusashi]

dapat pa po bang iinstall ung vicibox express? at ano po ung ARCHIVE? ano po use nun?
Salamat po sa pagsagot.

Kung single server meaning lahat is in one box(Telephony server, database server, web mysql, ftp etc.) All you need to run is the vici express installation mas mabilis but if you are going to have a cluster or separate server like separate database server etc. use the normal installation. Archive server pwedeng backup server for your old files or old recordings po

 

[lohen]

Kung single server meaning lahat is in one box(Telephony server, database server, web mysql, ftp etc.) All you need to run is the vici express installation mas mabilis but if you are going to have a cluster or separate server like separate database server etc. use the normal installation. Archive server pwedeng backup server for your old files or old recordings po

salamat po.. taga san ka pala sir?

 

[kojiromusashi]

Valenzuela po

 

[lohen]

Valenzuela po

san ka sa valenzuela sir?
pano ko po ipapa allow sa Telco un? dba po kailangan ng public IP nun? naka router po kc ako na connected sa modem. naka set po sa server na IP is ung private IP na 192.168.x.xx.. mejo nalilito po ako eh.

 

[kojiromusashi]

san ka sa valenzuela sir?
pano ko po ipapa allow sa Telco un? dba po kailangan ng public IP nun? naka router po kc ako na connected sa modem. naka set po sa server na IP is ung private IP na 192.168.x.xx.. mejo nalilito po ako eh.

kung wla ka pong static n ip address from you r telco provider you can look for a Voip n pwede ang username and password authentication pero you need to make sure your router has a good firewall or your iptables are properly set or you can ask your telco sa static n public ip so you can have ip to ip authentication s voip provider mo po. Kung nakarouter k yung Vici-box mo po istatic mo po s router ung ip nya like 192.168.1.5 or whatever ip address you want to assign.

 

[lohen]

kung wla ka pong static n ip address from you r telco provider you can look for a Voip n pwede ang username and password authentication pero you need to make sure your router has a good firewall or your iptables are properly set or you can ask your telco sa static n public ip so you can have ip to ip authentication s voip provider mo po. Kung nakarouter k yung Vici-box mo po istatic mo po s router ung ip nya like 192.168.1.5 or whatever ip address you want to assign.

meron po ako static IP na binigay ng ISP namin. nalilito lng talaga ako kc pano nila iaallow ang calls kung nka public IP ang vicibox ko. kung papalitan ko naman gamit ang static IP ko, hnd ko naman maaccess c vicidial dahil connected ako sa router at ung ibang computer... kailangan po ba dalawa lan port ko? add ako PCI? para iset ung static sa PCI at public sa lan settings? cnxa na po nalilito talaga ako..

 

[kojiromusashi]

Ganito po ang setup n possible na gawin mo po kung single server k po


modem ----- router ---- Vicidial Server ---(switch)--- PC/Workstations

Since nkastatic k you can setup your router to be a dhcp server then connect mo yung Vicidial server s router then you can assign the ip for your server then set that ip to static yung mga pc mo connect mo s switch na connected s router. You can set port forwarding sa router mo po if needed ng Voip and setting the port forwarding is depende n po s router mo you can read the specific manual for your router. No need for you to add more NIC or lan card. Then if you want your Server to be access outside your network you can port forward port 80 to your Vicidial Server LAN IP

 

[lohen]

Ganito po ang setup n possible na gawin mo po kung single server k po


modem ----- router ---- Vicidial Server ---(switch)--- PC/Workstations

Since nkastatic k you can setup your router to be a dhcp server then connect mo yung Vicidial server s router then you can assign the ip for your server then set that ip to static yung mga pc mo connect mo s switch na connected s router. You can set port forwarding sa router mo po if needed ng Voip and setting the port forwarding is depende n po s router mo you can read the specific manual for your router. No need for you to add more NIC or lan card. Then if you want your Server to be access outside your network you can port forward port 80 to your Vicidial Server LAN IP

eto po ung diagram ng connection ko sir, pacheck nalang kung ano dapat baguhin. thanks

 

[kojiromusashi]

ok n po yan make sure that the Vici server and the workstations are on the same ip range and for security reason po next time don't post your public ip pwedeng xxx.xxx.xxx.xxx n lng po ang lagay natin to be safe.

 

[lohen]

ok n po yan make sure that the Vici server and the workstations are on the same ip range and for security reason po next time don't post your public ip pwedeng xxx.xxx.xxx.xxx n lng po ang lagay natin to be safe.

ay opo.. hehe... bale po ung Public IP ang ipapaallow ko sa Voip Provider para sa inbound at outbound, ung IP na .34 po ba o ung Gateway na .35?

 

[kojiromusashi]

yung .34 yung public Ip mismo po

 

[lohen]

yung .34 yung public Ip mismo po

Sir, hnd po ba pwede mag asterisk -r sa express na server? kahit sip show peers?
hnd kasi nagkokonek c Softphone. tama naman mga configs ko.

sir, san kita pwedeng kontakin maliban dto sa symb? kung hnd kc magwork sakin, ikaw na kunin ko magsetup kung sakali. pagusapan nalang natin.
Thanks

 

[kojiromusashi]

Sir, hnd po ba pwede mag asterisk -r sa express na server? kahit sip show peers?
hnd kasi nagkokonek c Softphone. tama naman mga configs ko.

sir, san kita pwedeng kontakin maliban dto sa symb? kung hnd kc magwork sakin, ikaw na kunin ko magsetup kung sakali. pagusapan nalang natin.
Thanks

Salamat po sa tiwala, as much as possible hanggat maari ayaw ko gumastos kayo, if pwede nman po ipost dito ang magiging issue para maresolve saka marami po tutulong sa ating d2. Post mo na lang po d2 yung error if ever. Salamat po muli.

 

[lohen]

Salamat po sa tiwala, as much as possible hanggat maari ayaw ko gumastos kayo, if pwede nman po ipost dito ang magiging issue para maresolve saka marami po tutulong sa ating d2. Post mo na lang po d2 yung error if ever. Salamat po muli.

nd po ba pwede mag asterisk -r sa express na server? kahit sip show peers?
hnd kasi nagkokonek c Softphone. tama naman mga configs ko.

 

[kojiromusashi]

nd po ba pwede mag asterisk -r sa express na server? kahit sip show peers?
hnd kasi nagkokonek c Softphone. tama naman mga configs ko.

pwede po mag asterisk -r or mas maganda asterisk -vvvvvvr para sa verbosity or pagdisplay ng info.
have you check the firewall or iptables ?
try to disable them first to see if it is the one causing the issue.

 

[lohen]

pwede po mag asterisk -r or mas maganda asterisk -vvvvvvr para sa verbosity or pagdisplay ng info.
have you check the firewall or iptables ?
try to disable them first to see if it is the one causing the issue.

wala po laman iptables ko sir,bagong gawa lang server.
nakonek ko na Eyebeam, eto pinasok kong code,

/usr/sbin/asterisk
Privilege escalation protection disabled!
See https://wiki.asterisk.org/wiki/x/1gKfAQ for more details.
Asterisk already running on /run/asterisk/asterisk.ctl. Use 'asterisk -r' to connect.

pero pagclick ko nung answer sa eyebeam, hung up lang xa

Errors:
View attachment 264396

View attachment 264397

 

[kojiromusashi]

Nice your almost there,

First try to run this command

/etc/init.d/asterisk start
/etc/init.d/dahdi start
/etc/init.d/mysql start

then run asterisk -vvvvvr

then try to login in again s vicidial
yung hung up pag answer me possible because or sip.conf settings or entry mo po or phone settings

pero try mo po muna ma open ang asterisk cli pr makuha natin ang error.

 

[justasking]

^Dre, may mga tutorials ka ba jan sa asterisk cli mismo? Gusto ko din pag aralan ung mga errors at iba pang ganap sa asterisk cli mismo.

 

[kojiromusashi]

^Dre, may mga tutorials ka ba jan sa asterisk cli mismo? Gusto ko din pag aralan ung mga errors at iba pang ganap sa asterisk cli mismo.

Meron n po ako nakapost s forums ntin. Asterisk Tutorial