Yung MATATAPANG ang pwedng pumasok... Windows server 2012

[micollr]

TANONG MGA MASTERS

GIVEN:

R1(cisco e1200-PLDT connected)= 192.153.153.1 R2(GLOBE modem) = 192.168.254.254
PC1 = 192.153.153.2
PC2 = 192.168.254.254

Windows server 2012 has double NIC connected both R1 and R2 and can ping both pc1 and pc 2

Note: what you see is what you get. (NO VLAN, LEVEL 3 switches)

QUESTION:
Can pc1 and pc2 ping each other?


*ginawa ko na ang lahat.. dko na kaya kayo na lang bahala d2 malakas eh..

 

[splankterdz]

TANONG MGA MASTERS

GIVEN:

R1(cisco e1200-PLDT connected)= 192.153.153.1 R2(GLOBE modem) = 192.168.254.254
PC1 = 192.153.153.2
PC2 = 192.168.254.254

Windows server 2012 has double NIC connected both R1 and R2 and can ping both pc1 and pc 2

Note: what you see is what you get. (NO VLAN, LEVEL 3 switches)

QUESTION:
Can pc1 and pc2 ping each other?


*ginawa ko na ang lahat.. dko na kaya kayo na lang bahala d2 malakas eh..

wla pang matapang ah... hmmmm... sir tanong?


R1 (pldt)
R2 (globe)
server= 2 NIC

R1 (wan or lan)>>>1 NIC (server)
R2 (wan or lan)>>>2 NIC (server)


san sir nakaconnect PC1 and PC2?

tama ba sir pagkakaintindi ko?

sorry sir baguhan kasi ako... gusto ko lang matuto...

 

[rannis]

try lang alam ko sa main ip kalng pwde mg ping 192.153.153.1 pero sa pc1/pc2 hindi

 

[cliffromz23]

bro.... e series mo yan ip mo sa MODEM1 at MODEM2...

yang given mo ay local ip add is external ip bali pde yan e change... e series mo sla example MODEM1 192.168.1.1 then MODEM2 192.168.1.2

soo bali ung PC1 add manual ip 192.168.1.1.3 and soo on... tapos gateway mo 192.168.1.1 or.2 para sa internet...

dalawa kac isp namin dalawang PLDT... kaya yan ang ginawa ko dito... hope u get wat i mean... just pm me if anu na?

 

[micollr]

try lang alam ko sa main ip kalng pwde mg ping 192.153.153.1 pero sa pc1/pc2 hindi

d po sya ma ping..

 

[cliffromz23]

d po sya ma ping..

di talaga yan mag ping... kac siparate network yung R1 at R2... learn to know what is IP in a network....

192.153.153.1 is isang network yong R2 naman ibang network

192.153.153.1upto254 yan

pag napalitan yan 192.153.xxx.1 ibang network again
pag napalitan yan 192.xxx.153.1 ibang network again


bro you need to know what is ip in a network,.... Learn Subneting,

search mo sa youtube what kind of ip address... my class yan class a, class b, class c....

para malaman mo


- - - Updated - - -

meron din namang google.com.... search search bro...

LEARN SUBNETTING....

 

[mark14344]

pre di mo talga mapiping yan magkaiba kasi sila network eh... mag multiple network knlang mas ok pa...

 

[micollr]

di talaga yan mag ping... kac siparate network yung R1 at R2... learn to know what is IP in a network....

192.153.153.1 is isang network yong R2 naman ibang network

192.153.153.1upto254 yan

pag napalitan yan 192.153.xxx.1 ibang network again
pag napalitan yan 192.xxx.153.1 ibang network again


bro you need to know what is ip in a network,.... Learn Subneting,

search mo sa youtube what kind of ip address... my class yan class a, class b, class c....

para malaman mo


- - - Updated - - -

meron din namang google.com.... search search bro...

LEARN SUBNETTING....

alam ko namn po ung subnetting i was hoping someone to answer.. about the server 2012 setup.. na pwede e route ng windows server ung different ip's.. thru trial and error na ping ko namn yung ibang pc thru wireless.. but how!! but sa isang pc lang but d sa lahat.. haist.. hahaha kaya mahirap eh..

 

[splankterdz]

ano po ba purpose sir ng server 2012 mo???
ano po bang ginamit mo pang ping???
anong router or IP po naping mo???


pansin ko rin sir, parehas ng IP ung R2 at PC2...
kya po tatanong ako sir kung san nkakabit ung mga R1>>server NIC1 tska R2>>>server NIC2

 

[biscuitz]

Use static ip address on both router but maintain default gateway. or connect two router using hub.

 

[verticancer]

R1(cisco e1200-PLDT connected)= 192.153.153.1 R2(GLOBE modem) = 192.168.254.254
PC1 = 192.153.153.2
PC2 = 192.168.254.254

Conflict ung IP.

 

[benedik]

Magulo yong setup , kahit sa packet tracer di ito gagana , yong IP plang conflict na. Aralin mo ts ung RIP command baka sakaling makatulong

 

[xenphobia15]

basic po sa network is same default gateway para magkita ang dalawang pc. dapat din same sila ng network ng server mo like. 192.168.1.x then ung IP ng 2 PC is 192.168.1-254 na IP. yan sir.

- - - Updated - - -

Try mo to sir. gawin mo default gateway ung IP address ng server mo sa both PC. magkikita na yan.

 

[Gamecore]

subnetting ?

 

[mikegemai]

TANONG MGA MASTERS

GIVEN:

R1(cisco e1200-PLDT connected)= 192.153.153.1 R2(GLOBE modem) = 192.168.254.254
PC1 = 192.153.153.2
PC2 = 192.168.254.254

Windows server 2012 has double NIC connected both R1 and R2 and can ping both pc1 and pc 2

Note: what you see is what you get. (NO VLAN, LEVEL 3 switches)

QUESTION:
Can pc1 and pc2 ping each other?


*ginawa ko na ang lahat.. dko na kaya kayo na lang bahala d2 malakas eh..

TS, ganito ba pag ka setup ng network mo? at hindi mo po pwedeng e assign sa PC2 ang IP Address na 192.168.254.254 kasi assigned sa modem na yan. and lastly, talagang hindi mag piping ang PC1 at PC2, very network basic yan.
View attachment 274463

 

[ciscoloverjoseph]

hindi ko po nagets...ibig sabihin ba nyan ung server mo (physical server) has two NICs one connectd to pldt and the other is on globe??
1st question) ung connection po ba ng globe and PLDT ay as in connection tlga sya ung binabayaran mo monthly?? or prang naming convention mo lng sa 2 routers
2nd question) if tlagng connection sya, VPN or DSL ba yan??
3rd) or lab set up lang ba yan??
4th) are u using hyper-V?

hindi ko alam kung directly connected ba ung dalawang routers, kasi ang nasabi mo lang kasi ung PC1 connected sya sa PLDT ung PC2 connected sa globe, so it is safe to assume na, gamit mo ung network ng two ISPs (globe and PLDT) pra magconnect ung PLDT and globe router, or else mali tlga setup mo, pero if naayos mo yang setup mo (kung lab envi nmn yan)
try mo to:
from R1 try mo magextended ping:
destination: 192.168.254.1 (interface R2 to PC2)
source:192.153.153.1 (interface R1 to PC1)
kung hindi nagping yan, sa routing may mali.... tska ano ip ng other interface ng pldt modem tska yang globe??

if ok kana

try mo to:

open command prompt as Admin and enter the following:


route add 192.168.254.0 mask 255.255.255.0 192.153.153.1 -p
route add 192.153.153.0 mask 255.255.255.0 192.168.254.1 -p

 

[bhemboyshouse]

TANONG MGA MASTERS

GIVEN:

R1(cisco e1200-PLDT connected)= 192.153.153.1 R2(GLOBE modem) = 192.168.254.254
PC1 = 192.153.153.2
PC2 = 192.168.254.254

Windows server 2012 has double NIC connected both R1 and R2 and can ping both pc1 and pc 2

Note: what you see is what you get. (NO VLAN, LEVEL 3 switches)

QUESTION:
Can pc1 and pc2 ping each other?


*ginawa ko na ang lahat.. dko na kaya kayo na lang bahala d2 malakas eh..

TS. change ip mo ang

R1(cisco e1200-PLDT connected)= 192.153.153.1

gawin mong 192.168.254.1
mag static config ka sa pc's mo.

pc1 -
192.168.254.2 - pc1lan ip
255.255.255.0 - subnet mask
192.168.254.1 - gateway (your r1)

pc2 -
192.168.254.100 - pc2 lan IP
255.255.255.0 - subnet mask
192.168.254.254 - gateway (your r2)

pwd mu ma ping router 1 and 2 gamit ang pc1 or pc2
pwd mu rin ma ping pc1 to pc2
same network nayan.

r1 to switch hub 192.168.254.1
r2 to switch hub 192.168.254.254

switch hub to pc1 - 192.168.254.2 gateway mo ang r1
switch hub to pc2 - 192.168.254.100 gateway mo ang r2

pwd ka rin mag dagdag ng kahit ilan pang pc's. static mulang para hindi mag conflict.

 

[jimvoi]

hindi mo yan maping mgkaiba network ip. except kung sa server ka ma ping mo kasi connect sila dalawa sa kanya.
ask lang ako anu purpose mo sa two net? kasi kahit sa server ka hindi mo sabay maping yan. halimbawa ng failover/loadbalance ka yung naka set sa port for pinging ang puidi mo lang maping or manually set ka sa server mo yung ano na net ang iping mo.

 

[odacrem]

TANONG MGA MASTERS

GIVEN:

R1(cisco e1200-PLDT connected)= 192.153.153.1 R2(GLOBE modem) = 192.168.254.254
PC1 = 192.153.153.2
PC2 = 192.168.254.254

Windows server 2012 has double NIC connected both R1 and R2 and can ping both pc1 and pc 2

Note: what you see is what you get. (NO VLAN, LEVEL 3 switches)

QUESTION:
Can pc1 and pc2 ping each other?


*ginawa ko na ang lahat.. dko na kaya kayo na lang bahala d2 malakas eh..

Hindi mo sya mapiping kasi di sya pareho ng network or default gateway even if your server is connected to R1 and R2. and pwede mo lang maping dyan eh server to pc1/pc1 to server or server to pc2/pc2 to server.

 

[jpgarcia123]

kung sa isang switch lang sila dumaan puide.

ex.

R1 192.168.15.100
R2 192.168.254.254

add kalang ng IP PC1 & PC2
View attachment 277924


Try lang mga bro ginawa ko na yan sa office namin