Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.
All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!
di ko pa na try yung yonip bat int2ext naba yonip baka data2ext lang yun pede mo din gawin dito yun. since ext2 support naman to sa case ko gusto automatic na internal parang andread
yun nga yata yun sir. pwede po ba step by step tut naman po how to flash the rom gingerblaze 1.2?
haha mahaba na po usapan natin baka makagalitan na tayo off topic na tayo punta ka nalang po sa thread ng gingerblaze very well explain yung tutorial dun isusubo nalang sayo hehe
sir rsp27ph, baka may link ka dyan sa flashable stock rom 2.3.5 ni sir bluerain. pwede ko pahingi? wala na kasi don sa personal site ni sir bluerain.
@rsp27ph
wala ka po ba nung openline hehe balik smart at sun ulit sim 1
but anyway thanks po sa tutorial haha its 100% working
Here is the link
http://199.91.153.106/7s7hz959ouig/bmahd9h0rvaj6ha/AlcatelOT918N_Stockv235.zip
good luck
matry to hahaTutorial on how to flash back your OT918N from version 918D 2.3.5 to version 918N 2.3.6 Gingerbread using Mediatek Flash Tool.
Requirements:
Attached file below,
Your 2.3.6 nandoid backup, (warning: be sure your nandroid backup is not corrupted)
Your phone alcatel OT918 from Sun.
Step 1: Download the file below and put it on your desktop (2.3.6 Gingerbread folder).
Step 2: Extract your nandroid backup (2.3.6) from your sd card to your desktop.
Step 3: From your nandroid backup place the "boot.img", “system.yaffs2” and “data.yaffs2” inside the 2.3.6
Gingerbread folder
Step 4: Open Flash Tool, click scattered loading and go to folder 2.3.6 Gingerbread folder and
select “MT6573_Android_scatter” file. Click option “USB mode” and Backup-format-download-restore NVRAM. Now Flash only the following files:
PRELOADER
DSP_BL
pro_info
Click “download” and with your phone turn off connect the usb cable and flashing will start.
Wait till it ends indicating “Download OK” disconnect usb cable. Momentary remove the
Battery.
Step 5: Close the flash tool and open it again and click scatter loading and this time select“MT6573_Android_scatter 918N” file. Click option “USB mode” and Backup-format-download-restore NVRAM. Flash the following files:
PRELOADER - preloader
DSP_BL - dsp_bl.img
UBOOT - uboot.img
BOOTING - boot.img
RECOVERY - recovery.img
SEC_RO - firmware.info
LOGO - logo.img
ANDROID - system.yaffs2.img
USRDATA - data.yaffs2.img
Click “download” and with your phone turn off connect the usb cable and flashing will start.
Be patient this will take 4 to 5min. At the end it will indicate “EBOOT ERROR10001).
Don’t be alarm were not done yet. Remove the usb and close the flash tool.
Step 6: Open the flash tool again and click scatter loading and select
“MT6573_Android_scatter 918N”. Click option “USB mode” and Backup-format-download- no action.
Flash the following files:
UBOOT - uboot.img
BOOTING - boot.img
RECOVERY - recovery.img
LOGO - logo.img
Click “download” and with your phone turn off connect the usb cable and flashing will start.
Wait till it ends indicating “Download OK”. Disconnect the usb cable.
Step 7: On your phone go to recovery by pressing vol+ and power button and do a nandroid restore.
Restore to your 2.3.6 backup wait till it end and reboot.
I will upload my nandroid 2.3.6 backup soon…good luck. :