Symbianize Forum

Most of our features and services are available only to members, so we encourage you to login or register a new account. Registration is free, fast and simple. You only need to provide a valid email. Being a member you'll gain access to all member forums and features, post a message to ask question or provide answer, and share or find resources related to mobile phones, tablets, computers, game consoles, and multimedia.

All that and more, so what are you waiting for, click the register button and join us now! Ito ang website na ginawa ng pinoy para sa pinoy!

Flash / upgrade your share mid-2330 safely, effectively, hassle free.

hi goodmorning, na brick yung android share tablet ko after ko mag install ng chainfire. then nag install ako ng firmware. okay naman pero d po gumagana yung wifi. but the rest is okay. pano ko po ba mapapagana yung wifi? hassle kasi pag walang wifi
 
hi goodmorning, na brick yung android share tablet ko after ko mag install ng chainfire. then nag install ako ng firmware. okay naman pero d po gumagana yung wifi. but the rest is okay. pano ko po ba mapapagana yung wifi? hassle kasi pag walang wifi

Same tayo bro. Ako rin ganyan eh. Lahat na ata ng compatible roms eh natry ko na pero lahat ndi gumagana ung wifi.
Try mo bro sa Adb or uberizer.

:clap:
 
hi goodmorning, na brick yung android share tablet ko after ko mag install ng chainfire. then nag install ako ng firmware. okay naman pero d po gumagana yung wifi. but the rest is okay. pano ko po ba mapapagana yung wifi? hassle kasi pag walang wifi

you must be on JB rom and you tried to install chainfire 3D ... tama ba? di kasi compatible chainfire 3D on any JB roms ... and it seems like dev has no plans of updating it ... anyway ...

kung alam mo yung wifi module for your tab ... check mo kung nasa /vendor/modules ... pag nandun ... insmod mo lang ... afterwards, check using lsmod kung na load yung module ... then test sa wifi settings ...
 
Last edited:
Same tayo bro. Ako rin ganyan eh. Lahat na ata ng compatible roms eh natry ko na pero lahat ndi gumagana ung wifi.
Try mo bro sa Adb or uberizer.

:clap:

ano kaya solution dito? okay na ba yung tab mo?



you must be on JB rom and you tried to install chainfire 3D ... tama ba? di kasi compatible chainfire 3D on any JB roms ... and it seems like dev has no plans of updating it ... anyway ...

kung alam mo yung wifi module for your tab ... check mo kung nasa /vendor/modules ... pag nandun ... insmod mo lang ... afterwards, check using lsmod kung na load yung module ... then test sa wifi settings ...

pano ko po malalaman yun? sensya na i'm new to android kasi. :help:

nag try ako sa uberizer. tnry ko yung bugreport eto po nakita ko

04-22 23:16:18.389 150 204 D WifiHW : start to isnmod 8192cu.ko
04-22 23:16:23.469 150 204 D WifiHW : faied to read proc/net/wireless

then nag lsmod ako

wala dun yung 8192cu.ko


pano ko po siya malalagay dun?
 
Last edited:
ano kaya solution dito? okay na ba yung tab mo?





pano ko po malalaman yun? sensya na i'm new to android kasi. :help:

nag try ako sa uberizer. tnry ko yung bugreport eto po nakita ko

04-22 23:16:18.389 150 204 D WifiHW : start to isnmod 8192cu.ko
04-22 23:16:23.469 150 204 D WifiHW : faied to read proc/net/wireless

then nag lsmod ako

wala dun yung 8192cu.ko


pano ko po siya malalagay dun?

You'll need a working ClockworkMod Recovery..
1. Place recovery.img on the internal SD card (/sdcard, not /extsd)
2. Install NovoTools 1.0, then open NovoTools
3. Press Flash Recovery. Wait until "Flash Recovery" notification appears
4. To enter CWM, press Boot to Recovery
NOTE: The MID-2330-S has no physical back button, so you'll have to reset the tablet each time. Hassle, I know.
recovery.img and NovoTools 1.0: http://www.mediafire.com/#wkb5caa7rw8yx

Taken from non-working components guide..
10. Reboot to recovery mode (CWM) using NovoTools.
11. Enter the following commands:
adb shell cat /dev/block/nandc > /sdcard/dump/boot.img
adb pull /sdcard/dump/boot.img c:/
12. Unpack boot.img in your C: using this guide: http://www.freeyourandroid.com/guide...ot-img-windows
13. Open the init.sun5i.rc file using Notepad++
14. Add this line to the drivers section:
insmod /vendor/modules/<filename>.ko
15. Repack boot.img using the guide.
16. Enter adb push c:/boot.img /sdcard/ to the command prompt.
17. Enter adb shell cat /sdcard/boot.img > /dev/block/nandc
 
type ===>>> /vendor/modules ... tapos ... ls ... check kung nandun yung 8192cu.ko ... kung nandun ... insmod then lsmod ... if not, hanap ka muna net ... tapos lagay mo sa /vendor/modules using root explorer ... then ... insmod ... lsmod ... test ...
 
type ===>>> /vendor/modules ... tapos ... ls ... check kung nandun yung 8192cu.ko ... kung nandun ... insmod then lsmod ... if not, hanap ka muna net ... tapos lagay mo sa /vendor/modules using root explorer ... then ... insmod ... lsmod ... test ...

sir san ko po yan ittype? sensya na talaga noob pa sa android

ayun nakita ko na po pala
 
Last edited:
eto pala yung firmware ko dati. d ako makahanap ng ganito CJ-31S-7601_nuclear_evb_20130419_0138
 
pano po ba mag install ng drivers via bat file? may nakita kasi ako na ganun ehh
 
Tignan mo yung mga zip files ni Toxicro. Edit mo yung run.bat nya then tignan mo kung ano laman. :thumbsup:

sir san ko makikita yung mga files ni toxicro? may nakita akong firmware, meron syang driver nung wifi ko by default. and JB na din sya. kaya lang ang hirap kasi mag dl sa 4shared ehh. bagal pa
 
techknow .. :) ... maliliit lang naman yung batch files ... sandali lang yun i-download ...
 
Ayan up na ulit. :excited:

sir san ko makikita yung mga files ni toxicro? may nakita akong firmware, meron syang driver nung wifi ko by default. and JB na din sya. kaya lang ang hirap kasi mag dl sa 4shared ehh. bagal pa

Pahingi ng link? :lol:
 
Back
Top Bottom