- Messages
- 474
- Reaction score
- 3
- Points
- 28
MYPHONE RAIN 3G CWM/ROOT AND CUSTOM ROM..
CREDITS PO KAY "SIR MIYER BERNABE" ..
SIYA PO YUNG GUMAWA.SHARE KO LANG PO YUNG GINAWA NIYA..
ROOT YOUR PHONE USING FRAMAROOT!
you can download it on google play..
CWM
first download this software
http://www.mediafire.com/download/n3pv6519ya4ovor/MtkDroidTools_v248.exe
HOW TO INSTALL CWM TO RAIN 3G
FIRST OF ALL YOUR PHONE NEED TO BE ROOTED
YOU WILL NEED THE FOLLOWING:
MTKDROIDTOOLS yung nasa taas downlaod niyo..
1. UNA ENABLE USB DEBUGGING SA RAIN 3G NYO
2. AFTER NUN CONNECT NYO SA PC AND OPEN MTKDROIDTOOLS
3. TUMINGIN SA LOWER LEFT CORNER NG MTKDROIDTOOLS
4. A. PAG BLUE IT MEANS THAT YOU ARE NOT ROOTED
B. PAG YELLOW IT MEANS THAT NAKA INSTALL YUNG SUPER SU PERO WALNG BUSY BOX
C. PAG GREEN AYUN ROOTED YUNG PHONE MO REKTA NA SA NEXT STEP
5. CLICK NYO YUNG “TO USE BOOT FROM PHONE”
6. THEN CLICK RECOVERY AND BOOT
7. MAY LALABAS DUN “MAKE CWM AUTOMATICALLY”
8. PRAY HARD AT TINGNAN KUNG LAHAT NG STEPS SA TAAS AY NAGAWA MO NA
9. MAY 4 o 5 PANG LALABAS NA DIALOGUE BOX JUST CLICK YES SA LAHAT NG LALABAS
10. WAIT A FEW MINUTES THEN
BOOM MAY CWM KANA!!
To check if you are using CWM Recovery already, the font should be blue, not orange..
CARBON STRIKE [ROM]
Features:
* Tweaked to improve performance and stability
* Removed built-in apps that are not often used by the user
* Pre-rooted
* Zip-aligned
* Deodexed
* Init.d Support
* Some kernel modifications
* Bundled with the Xposed Framework Installer
* Bundled with Gravity Box
* User has the option to Pre-Partition the device to get 2.67Gb of Internal Storage compared to the default 1Gb, but will reduce the size of your Phone Storage
* – This will maximize the number of apps that can be installed to the device
* User has the option to Pre-swap the Phone Storage with The SD Card storage. This will make your SD Card your Phone memory, thus increasing space for data needed by apps (OBB and DATA files).
* – This is best used with Re-Partitioning
Download: https://docs.google.com/file/d/0B5OYTnbjVEkfRmZUbUFIcF9zbmM/edit?usp=sharing
REMEMBER TO FOLLOW ALL INSTALLATION INSTRUCTIONS!!!
REMEMBER TO ACTIVATE/INSTALL XPOSED INSTALLER/FRAMEWORK AFTER FIRST BOOT. ON SECOND BOOT, GO TO XPOSED INSTALLER, CLICK ON MODULES, ACTIVATE GRAVITY BOX, THEN SELECT YOUR DESIRED OPTIONS.
Installation instructions:
Before anything else, BACKUP your existing DATA. I will not be held responsible for lost data. You have been warned.
1. Simply download the zip file
2. Open and install using CWM or TWRP
3. During install you will have the option to install also "Repartition"
4. If you choose "Repartition" your data will be FORMATTED and WIPED. However, after installation, go back to the recovery screen and wipe data again if you want to be sure.
5. After FIRST BOOT, open the launcher, search for "Xposed Installer", click on it to open.
6. Simply click on "Install/Update" to set up the Xposed Framework (Grant it root access)
7. After installing the Xposed Framework, don't reboot yet. Click on the "Modules" tab.
8. Put a check on GravityBox then click on GravityBox
9. Gravity Box is a set of tools/tweaks for the MT6572 chipset for added features. You may customize your own, but here is my personal configuration:
Lockscreen Tweaks - no choice
Statusbar Tweaks:
Statusbar QuickSettings tiles - checked all
Battery indicator style - circle battery with percentage
Auto-hide signal icons - check all
Power Tweaks: - Advanced power-off menu (checked)
Display Tweaks: - CRT screen off effect (checked)
Media Tweaks: - More music volume steps (checked), Safe headset media volume (checked)
Miscellaneous Tweaks - none
General fixes - Advanced developer options (checked)
10. Once configured, reboot
11. Start using your phone
"Note: I Am Not Responsible For Any Further Damage Of Your Device"
"Do Not Quote This Thread"
CREDITS PO KAY "SIR MIYER BERNABE" ..
SIYA PO YUNG GUMAWA.SHARE KO LANG PO YUNG GINAWA NIYA..
ROOT YOUR PHONE USING FRAMAROOT!
you can download it on google play..
CWM
first download this software
http://www.mediafire.com/download/n3pv6519ya4ovor/MtkDroidTools_v248.exe
HOW TO INSTALL CWM TO RAIN 3G
FIRST OF ALL YOUR PHONE NEED TO BE ROOTED
YOU WILL NEED THE FOLLOWING:
MTKDROIDTOOLS yung nasa taas downlaod niyo..
1. UNA ENABLE USB DEBUGGING SA RAIN 3G NYO
2. AFTER NUN CONNECT NYO SA PC AND OPEN MTKDROIDTOOLS
3. TUMINGIN SA LOWER LEFT CORNER NG MTKDROIDTOOLS
4. A. PAG BLUE IT MEANS THAT YOU ARE NOT ROOTED
B. PAG YELLOW IT MEANS THAT NAKA INSTALL YUNG SUPER SU PERO WALNG BUSY BOX
C. PAG GREEN AYUN ROOTED YUNG PHONE MO REKTA NA SA NEXT STEP
5. CLICK NYO YUNG “TO USE BOOT FROM PHONE”
6. THEN CLICK RECOVERY AND BOOT
7. MAY LALABAS DUN “MAKE CWM AUTOMATICALLY”
8. PRAY HARD AT TINGNAN KUNG LAHAT NG STEPS SA TAAS AY NAGAWA MO NA
9. MAY 4 o 5 PANG LALABAS NA DIALOGUE BOX JUST CLICK YES SA LAHAT NG LALABAS
10. WAIT A FEW MINUTES THEN
BOOM MAY CWM KANA!!
To check if you are using CWM Recovery already, the font should be blue, not orange..
CARBON STRIKE [ROM]
Features:
* Tweaked to improve performance and stability
* Removed built-in apps that are not often used by the user
* Pre-rooted
* Zip-aligned
* Deodexed
* Init.d Support
* Some kernel modifications
* Bundled with the Xposed Framework Installer
* Bundled with Gravity Box
* User has the option to Pre-Partition the device to get 2.67Gb of Internal Storage compared to the default 1Gb, but will reduce the size of your Phone Storage
* – This will maximize the number of apps that can be installed to the device
* User has the option to Pre-swap the Phone Storage with The SD Card storage. This will make your SD Card your Phone memory, thus increasing space for data needed by apps (OBB and DATA files).
* – This is best used with Re-Partitioning
Download: https://docs.google.com/file/d/0B5OYTnbjVEkfRmZUbUFIcF9zbmM/edit?usp=sharing
REMEMBER TO FOLLOW ALL INSTALLATION INSTRUCTIONS!!!
REMEMBER TO ACTIVATE/INSTALL XPOSED INSTALLER/FRAMEWORK AFTER FIRST BOOT. ON SECOND BOOT, GO TO XPOSED INSTALLER, CLICK ON MODULES, ACTIVATE GRAVITY BOX, THEN SELECT YOUR DESIRED OPTIONS.
Installation instructions:
Before anything else, BACKUP your existing DATA. I will not be held responsible for lost data. You have been warned.
1. Simply download the zip file
2. Open and install using CWM or TWRP
3. During install you will have the option to install also "Repartition"
4. If you choose "Repartition" your data will be FORMATTED and WIPED. However, after installation, go back to the recovery screen and wipe data again if you want to be sure.
5. After FIRST BOOT, open the launcher, search for "Xposed Installer", click on it to open.
6. Simply click on "Install/Update" to set up the Xposed Framework (Grant it root access)
7. After installing the Xposed Framework, don't reboot yet. Click on the "Modules" tab.
8. Put a check on GravityBox then click on GravityBox
9. Gravity Box is a set of tools/tweaks for the MT6572 chipset for added features. You may customize your own, but here is my personal configuration:
Lockscreen Tweaks - no choice
Statusbar Tweaks:
Statusbar QuickSettings tiles - checked all
Battery indicator style - circle battery with percentage
Auto-hide signal icons - check all
Power Tweaks: - Advanced power-off menu (checked)
Display Tweaks: - CRT screen off effect (checked)
Media Tweaks: - More music volume steps (checked), Safe headset media volume (checked)
Miscellaneous Tweaks - none
General fixes - Advanced developer options (checked)
10. Once configured, reboot
11. Start using your phone
"Note: I Am Not Responsible For Any Further Damage Of Your Device"
"Do Not Quote This Thread"
Attachments
-
602405_646343362054014_1984616235_n.jpg27.7 KB · Views: 376
-
1379600_10201698983103823_1446232605_n.jpg20.4 KB · Views: 337
-
Screenshot_2013-10-19-10-46-24.png226.1 KB · Views: 260
-
Screenshot_2013-10-19-10-47-14.png21.7 KB · Views: 293
-
Screenshot_2013-10-19-10-47-29.png192.6 KB · Views: 229
-
Screenshot_2013-10-19-18-23-21.png19.5 KB · Views: 232
Last edited: