- Messages
- 752
- Reaction score
- 0
- Points
- 26
I'm reopening this thread. Please refer to this for reference: http://www.symbianize.com/showthread.php?t=1090689&p=19096123&viewfull=1#post19096123
THIS POST IS STILL UNDERGOING EDITS. PLEASE BEAR WITH ME...
FOR 2013 firmware version or BM623m users, READ THIS:
Good for version 2013 firmware and BM623m din. WHY? Kasi hindi nyo na kailangan i-enable ang SSH everytime magtetest kayo kung working ang mac. Try lang kayo ng try ng mac until connected. Sa next reboot nyo na lang uli i-reenable ang SSH.
Sa sniper naman, diretso din kahit 2013 firmware or BM623m.
"Pwede" sa version 2013 Firmware but downgrading to 2012 recommended for ease of use. BM623m pwede din idowngrade sa BM622m 2012 firmware hindi mawawala ang wifi.
Search na lang kayo dito sa Symb How to downgrade from 22m-2013/23m to 22m-2012 via Winspreader kung gusto nyo mag downgrade sa 2012 firmware OR How to enable modem's SSH server kung ayaw nyo na galawin 2013 firmware nyo.
Try nyo nga pala to. May video how to use the shareware on BM622m-2013 or BM623m-2013 (thanks to carlsus):
http://www.symbianize.com/showthread.php?t=1142349
You must also have a properly working Internet Explorer (IE) browser installed in order for some features under "OTHER TOOLS" to work.
Nag-eevolve po ang program natin kaya basa-basa na lang po sa thread kung gusto nyo malaman konting history nito or makita ang link ng old downloadables. Yung latest version na lang po kasi ang itinitira ko dito sa first post.
Pag inopen nyo ang GUI sa browser, mapapansin nyo hindi napalitan ang mac na nakasulat pero SA LOOB NG MODEM AY PERMANENTLY NAPALITAN NA ANG MAC. Try nyo ireboot ang modem at magreregister na sa GUI ang last mac used.
Para maprove nyo:
- Magprepare kayo ng 2 macs. 1 connected and 1 disconnected.
- Iset nyo muna sa disconnected then reboot the modem. Makikita nyo sa GUI yung disconnected mac ang nakaregister.
- Then use the tool and set the connected mac without rebooting.
- Wait and observe...the modem will connect.
- Reboot modem and see that the (new) connected mac is now permanent.
-------------------------------------------
For all --> Download Shareware Version 2.04.04.04 @Mediafire
Limitations of shareware version: Sniping will stop after 3 live macs found.
To continue sniping...
1 "Incrementing/Decrementing" method - change the starting mac address
2. "By MAC List" method - change the list of macs (remove those already tested)
then click the [Snipe Now] button again.
Pwede po ang New at Old MAC Series dito.
* For 64-bit OS and Windows 7 or higher OS, set to run in Run as Administrator
* also try to run in Windows XP Compatibility Mode if not stable
* Problem reported on Windows 8 64-bit, try using VMware or downgrade your OS
For tuts on how to use the shareware, go here --> http://www.symbianize.com/showthread.php?t=1129138
(* Please wait for the thread starter to re-open it)
Or refer to the following instruction:
P.S. HINDI KO PO SINASAGOT YUNG MGA HINDI NAGBASA NG INSTRUCTIONS...
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
THIS PART AND THE REST OF THE POST IS FOR THE REGISTERED VERSION ONLY:
For registered users (latest "multi-snipe" or "browse-while-snipe" version) --> Download Registered Version 3.04 (dating password)
Download nyo pa din itong pinakahuli sa old system of sniping para magamit nyo as 1st sniper (pero hindi ito pwede pang snipe while browsing) --> Download Registered Beta Version 3.03 (same password)
To use version 2.10.03 and higher, run the extractor program to create BMT.exe file in your folder. This is the actual toolkit program. You can make a shortcut for it if you want but do not rename BMT.exe otherwise it will not run.
* beta-tester positions are full right now so don't PM for password, please.
TOOLKIT UPDATE LOG & GUIDE (APPLIES TO LATER VERSIONS)
Updates 3.04:
- can be used as "2nd" sniper and make your old toolkit version your "1st" sniper (multi-run)
- can be expanded for unlimited number of "multi-sniping" instances (optional)
- can be used to snipe while another modem is browsing (just make the toolkit's assigned LAN card properties to static IP and REMOVE THE "GATEWAY" ENTRY)
- checks for the MAC's max UL/DL speeds from service flow (DV models) or downlink/uplink properties (BM models)
- multi-sniping can be used for both DV235T/BM622m models and compatibles (Globe only)
- correct GUI admin password can be set at [Modem Settings] command button. This is required for sniping for BM622m models; not required for DV235T modem.
- [New session] and [Base MAC List] command buttons consolidated
* Please wait for Morpheus's updated in his Facebook page for details
Updates 3.03:
- VIP MAC changing/sniping option:
In Forced Wmx PW, put the VIP password prefix (ex. wimax)
In + MAC's last __ digits, put how many last digits will be used as suffix. (ex. 3)
In the above example, if your MAC is E8:CD:2D:5A:1B:AC, then your Wimax Password will be wimaxbac. If you put 5, then your Wimax Password will be wimaxa1bac, if you put 8, it will be wimax2d5a1bac. If you put lavaboy and 2 then it will be lavaboyac and so on.
* Same info will be used when sniping. However, when you re-open the program, this info will be erased. If you are using a VIP MAC password when you reopen the program it will be changed to standard password so use the tool to set it back.
Updates 3.02:
- Repair Config button added (credit to abidrei's post). Fro BM622m/23m modems only. Repairs most config problem like VINTAGE PROBLEM, Wimax LEDS stuck, and cannot reconnect when sniping.
Updates 3.01.01:
- updated sniper for smart macs
Updates 3.01:
- Inserted button for temporary change of modem serial number
- experimental mac changer for smart series mac (sniper feature for smart, to-follow)
Updates 2.10.04:
- fixed bugs associated with old mac series.
Updates 2.10.03:
- custom "new series" MAC prefix list. User can now add new series mac prefix (1st 4 digits) on their own. No need to wait for program update for the "new series" to be supported. "Known new series MAC prefixes already embedded...no need to add them: 0C96, 346B, 34CD, 5C7D, C8D1, E8CD, E808, C405. Please refer to the lates screenshot at the bottom of this post.
- login credentials when clicking [Enable SSH] button returned to "user/0SlO051O". This is for new 2012 units with SSH not yet enabled.
- bug-fix: reverting to old MAC after cancelling SNIPE ALL session
Updates 2.10.02:
- fix on domain after changing to old series mac
- fix on password generation after changing to old series mac then rebooting (a reboot routine will be offered by the program to make changes permanent)
- "reboot routine" offered every time needed in order to save the last change made.
- C4:05: XX:XX:XX:XX series added
- "create admin" routine required before using "Enable SSH"
- "TELNETD_ENABLED 0" changed to "TELNETD_ENABLED 1" during "protect" routine for those who still want to use telnet (previous versions disables telnet which can be reversed only by enabling telnet manually via SSH)
- rar file now contains an extractor/registration program which will extract the actual toolkit (BMT.exe). If toolkit is not yet registered, a registration dialog box must be filled-up before BMT.exe is extracted. After extraction, you can run the toolkit by launching BMT.exe. You can make a shortcut for it if you want but DO NOT RENAME BMT.EXE, it will not run if you do.
Updates 2.10.01:
-Bug-fix on Old Series mac change (Wimax UserID/Password not saved after reboot). However, to make old series mac changes permanent, reboot modem and do not close tool until reboot is finished and current settings are refreshed.
-Step = 1 now interprets to: +2 for old series mac (previously +1 only); +4 to new series mac (previously +4 also)
Updates 2.10:
-Bug-fix on sniper hang after mac change
-"Use Base MAC List" method can now also be continued on next sniping session
-Base MAC List is automatically sorted in the notepad itself after a sniping session. Indexes are also shown.
-New "Pass" and "Index" counters for monitoring position in the list of current-base-mac under test.
Updates 2.09.01-02:
-Removed unnecessary Gemtek Frequency Range command with syntax error which causes errors in DV235T
-Bug-fixes for Wimax Password generation
-Bug-fixes for sniping time display
Updates 2.09:
-Multiple Base MACs per sniping session (Old and New Series MACs can mix in one sniping session!)
-Sniping sessions are saved. Click on [Snipe 1 & Stay] or [Snipe All] to continue the previous session.
click [New Session] button to re-start session from beginning of list or when you wan to enter a new list.
-New [Clean-up] button to sort and remove duplicates from the selected mac history file.
-The initial tab displayed is the Sniping Tab which is the one frequently used.
Run the program. This is the initial screen:
After a split-second, if modem is detected:
If everything is fine, you will be directed to the MAC Sniper/Tester tab (which is more frequently used) and this is what you'll see:
If you click on the MAC Changer tab, the display will look something like this:
OTHER SCENARIOS DURING STARTUP:
1. Modem Inaccessible
POSSIBLE REASONS:
1.Wrong wimax model
2.Modem is not yet finished booting up
3.There is problem with the LAN cable connection (Local Area Connection was automatically checked already)
4. IP address is different from program setting
WHAT CAN BE DONE?
1. Replace modem with allowed models (BM622m/BM623m/DV235T-for-globe only)
2. Wait for the modem to finish the boot up process (bottom signal-LED blinking) before clicking [Yes] again.
3. Check your LAN cable and that Local Area Connection is not disabled
4. To change programs default IP, click [No] and follow the screenshots below:
4a. Click [Set Default IP] button
4b. Change IP to the modem's correct IP address (sorry for the label "Router IP", I will change that later). Then click [Save & Check] button
4c. If modem is still inaccesible, you will see this. However, the IP you entered will still be saved for the program to use
4d. If new IP is correct and modem is accesible, you will see this:
Click [Close] button and modem current settings will be checked again.
2. Modem SSH cannot be launched
POSSIBLE REASONS:
1.Modem's SSH Server is not enabled
2.Modem is not BM622m model but one different with the same Default IP address.
WHAT CAN BE DONE?
1. If firmware version is 2012, click yes to enable SSH automatically
2. If firmware version is not 2012 (or other models like 623m), click [No] and enable the SSH manually (please refer to other tutorials how to do this)
3. click [No], replace modem with appropriate one, click [Repair LAN] then click [Refresh] button afterwards.
USING THE SNIPER
* Note: MACS can be entered with or without colons ( : ); other non-hex characters and white-spaces are ignored; only the first 12-hex-characters of the line is read and validated.
For example:
If you enter these values in MACList.txt (Base MAc List file) at ang inilagay nyo sa STEP is 1:
34CDBEBD6C88 <-- new series
34CDBEBD6C7C <-- new series
E8:CD:2D:BF:96:a8 <-- new series
04:c0:6f:03:28:3c <-- old series
34:CD:BE:BD:6C:7C <-- new series (duplicate na ito ng 2nd mac)
(note: sinadya ko lagyan ng duplicate mac)
2. ang unang gagawin ng tool before sniping is sort the list at iremove ang duplicates, ito rin ang itetest ng sniper sa 1st pass:
04:C0:6F:03:28:3C
34:CD:BE:BD:6C:7C
34:CD:BE:BD:6C:88
E8:CD:2D:BF:96:A8
3. 2nd pass, eto na ang matetest na macs
04:C0:6F:03:28:3E <-- +2 dahil old series mac
34:CD:BE:BD:6C:80 <-- +4 dahil new series mac
34:CD:BE:BD:6C:8C <-- +4 dahil new series mac
E8:CD:2D:BF:96:AC <-- +4 dahil new series mac
4. 3nd pass, eto na ang matetest na macs
04:C0:6F:03:28:40 <-- +2 dahil old series mac
34:CD:BE:BD:6C:84 <-- +4 dahil new series mac
34:CD:BE:BD:6C:90 <-- +4 dahil new series mac
E8:CD:2D:BF:96:B0 <-- +4 dahil new series mac
5. 4th pass, eto na ang matetest na macs
04:C0:6F:03:28:42 <-- +2 dahil old series mac
..................................<-- hindi na itetest ang series na to dahil nag-abot na sa 3rd base mac (34:CD:BE:BD:6C:88)
34:CD:BE:BD:6C:94 <-- +4 dahil new series mac
E8:CD:2D:BF:96:B4 <-- +4 dahil new series mac
6. 5th pass, eto na ang matetest na macs
04:C0:6F:03:28:44 <-- +2 dahil old series mac
34:CD:BE:BD:6C:98 <-- +4 dahil new series mac
E8:CD:2D:BF:96:B8 <-- +4 dahil new series mac
and so on
Pero kung ang ginawa nyong STEP is 2:
1. 1st pass:
04:C0:6F:03:28:3C
34:CD:BE:BD:6C:7C
34:CD:BE:BD:6C:88
E8:CD:2D:BF:96:A8
2. 2nd pass, eto na ang matetest na macs
04:C0:6F:03:28:40 <-- +4 dahil old series mac
34:CD:BE:BD:6C:84 <-- +8 dahil new series mac
34:CD:BE:BD:6C:90 <-- +8 dahil new series mac
E8:CD:2D:BF:96:B0 <-- +8 dahil new series mac
3. 3nd pass, eto na ang matetest na macs
04:C0:6F:03:28:44 <-- +4 dahil old series mac
...................................<-- hindi na itetest ang series na to dahil nag-abot na sa 3rd base mac (34:CD:BE:BD:6C:88)
34:CD:BE:BD:6C:98 <-- +8 dahil new series mac
E8:CD:2D:BF:96:B8 <-- +8 dahil new series mac
4. 4th pass, eto na ang matetest na macs
04:C0:6F:03:28:48 <-- +4 dahil old series mac
34:CD:BE:BD:6C:A0 <-- +8 dahil new series mac
E8:CD:2D:BF:96:C0 <-- +8 dahil new series mac
and so on
New in version 2.10.03
Just input new series prefix (1st four Hex digits only). One series per line then save the file. The series below will automatically show the next time you edit the list plus the new ones that you added...
TO BE CONTINUED....
PLEASE DITO LANG PO SA THREAD MAG-POST NG TANONG TUNGKOL SA GUIDE. WAG NYO PO AKO I-PM OR I-TEXT DAHIL BUSY PO AKO NOWADAYS. EXPLORE-EXPLORE LANG AND SOME COMMON SENSE...
THIS POST IS STILL UNDERGOING EDITS. PLEASE BEAR WITH ME...
FOR 2013 firmware version or BM623m users, READ THIS:
Good for version 2013 firmware and BM623m din. WHY? Kasi hindi nyo na kailangan i-enable ang SSH everytime magtetest kayo kung working ang mac. Try lang kayo ng try ng mac until connected. Sa next reboot nyo na lang uli i-reenable ang SSH.
Sa sniper naman, diretso din kahit 2013 firmware or BM623m.
"Pwede" sa version 2013 Firmware but downgrading to 2012 recommended for ease of use. BM623m pwede din idowngrade sa BM622m 2012 firmware hindi mawawala ang wifi.
Search na lang kayo dito sa Symb How to downgrade from 22m-2013/23m to 22m-2012 via Winspreader kung gusto nyo mag downgrade sa 2012 firmware OR How to enable modem's SSH server kung ayaw nyo na galawin 2013 firmware nyo.
Try nyo nga pala to. May video how to use the shareware on BM622m-2013 or BM623m-2013 (thanks to carlsus):
http://www.symbianize.com/showthread.php?t=1142349
You must also have a properly working Internet Explorer (IE) browser installed in order for some features under "OTHER TOOLS" to work.
Nag-eevolve po ang program natin kaya basa-basa na lang po sa thread kung gusto nyo malaman konting history nito or makita ang link ng old downloadables. Yung latest version na lang po kasi ang itinitira ko dito sa first post.
Pag inopen nyo ang GUI sa browser, mapapansin nyo hindi napalitan ang mac na nakasulat pero SA LOOB NG MODEM AY PERMANENTLY NAPALITAN NA ANG MAC. Try nyo ireboot ang modem at magreregister na sa GUI ang last mac used.
Para maprove nyo:
- Magprepare kayo ng 2 macs. 1 connected and 1 disconnected.
- Iset nyo muna sa disconnected then reboot the modem. Makikita nyo sa GUI yung disconnected mac ang nakaregister.
- Then use the tool and set the connected mac without rebooting.
- Wait and observe...the modem will connect.
- Reboot modem and see that the (new) connected mac is now permanent.
-------------------------------------------
For all --> Download Shareware Version 2.04.04.04 @Mediafire
Limitations of shareware version: Sniping will stop after 3 live macs found.
To continue sniping...
1 "Incrementing/Decrementing" method - change the starting mac address
2. "By MAC List" method - change the list of macs (remove those already tested)
then click the [Snipe Now] button again.
Pwede po ang New at Old MAC Series dito.
* For 64-bit OS and Windows 7 or higher OS, set to run in Run as Administrator
* also try to run in Windows XP Compatibility Mode if not stable
* Problem reported on Windows 8 64-bit, try using VMware or downgrade your OS
For tuts on how to use the shareware, go here --> http://www.symbianize.com/showthread.php?t=1129138
(* Please wait for the thread starter to re-open it)
Or refer to the following instruction:
P.S. HINDI KO PO SINASAGOT YUNG MGA HINDI NAGBASA NG INSTRUCTIONS...
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
THIS PART AND THE REST OF THE POST IS FOR THE REGISTERED VERSION ONLY:
For registered users (latest "multi-snipe" or "browse-while-snipe" version) --> Download Registered Version 3.04 (dating password)
Download nyo pa din itong pinakahuli sa old system of sniping para magamit nyo as 1st sniper (pero hindi ito pwede pang snipe while browsing) --> Download Registered Beta Version 3.03 (same password)
To use version 2.10.03 and higher, run the extractor program to create BMT.exe file in your folder. This is the actual toolkit program. You can make a shortcut for it if you want but do not rename BMT.exe otherwise it will not run.
* beta-tester positions are full right now so don't PM for password, please.
TOOLKIT UPDATE LOG & GUIDE (APPLIES TO LATER VERSIONS)
Updates 3.04:
- can be used as "2nd" sniper and make your old toolkit version your "1st" sniper (multi-run)
- can be expanded for unlimited number of "multi-sniping" instances (optional)
- can be used to snipe while another modem is browsing (just make the toolkit's assigned LAN card properties to static IP and REMOVE THE "GATEWAY" ENTRY)
- checks for the MAC's max UL/DL speeds from service flow (DV models) or downlink/uplink properties (BM models)
- multi-sniping can be used for both DV235T/BM622m models and compatibles (Globe only)
- correct GUI admin password can be set at [Modem Settings] command button. This is required for sniping for BM622m models; not required for DV235T modem.
- [New session] and [Base MAC List] command buttons consolidated
* Please wait for Morpheus's updated in his Facebook page for details
Updates 3.03:
- VIP MAC changing/sniping option:
In Forced Wmx PW, put the VIP password prefix (ex. wimax)
In + MAC's last __ digits, put how many last digits will be used as suffix. (ex. 3)
In the above example, if your MAC is E8:CD:2D:5A:1B:AC, then your Wimax Password will be wimaxbac. If you put 5, then your Wimax Password will be wimaxa1bac, if you put 8, it will be wimax2d5a1bac. If you put lavaboy and 2 then it will be lavaboyac and so on.
* Same info will be used when sniping. However, when you re-open the program, this info will be erased. If you are using a VIP MAC password when you reopen the program it will be changed to standard password so use the tool to set it back.
Updates 3.02:
- Repair Config button added (credit to abidrei's post). Fro BM622m/23m modems only. Repairs most config problem like VINTAGE PROBLEM, Wimax LEDS stuck, and cannot reconnect when sniping.
Updates 3.01.01:
- updated sniper for smart macs
Updates 3.01:
- Inserted button for temporary change of modem serial number
- experimental mac changer for smart series mac (sniper feature for smart, to-follow)
Updates 2.10.04:
- fixed bugs associated with old mac series.
Updates 2.10.03:
- custom "new series" MAC prefix list. User can now add new series mac prefix (1st 4 digits) on their own. No need to wait for program update for the "new series" to be supported. "Known new series MAC prefixes already embedded...no need to add them: 0C96, 346B, 34CD, 5C7D, C8D1, E8CD, E808, C405. Please refer to the lates screenshot at the bottom of this post.
- login credentials when clicking [Enable SSH] button returned to "user/0SlO051O". This is for new 2012 units with SSH not yet enabled.
- bug-fix: reverting to old MAC after cancelling SNIPE ALL session
Updates 2.10.02:
- fix on domain after changing to old series mac
- fix on password generation after changing to old series mac then rebooting (a reboot routine will be offered by the program to make changes permanent)
- "reboot routine" offered every time needed in order to save the last change made.
- C4:05: XX:XX:XX:XX series added
- "create admin" routine required before using "Enable SSH"
- "TELNETD_ENABLED 0" changed to "TELNETD_ENABLED 1" during "protect" routine for those who still want to use telnet (previous versions disables telnet which can be reversed only by enabling telnet manually via SSH)
- rar file now contains an extractor/registration program which will extract the actual toolkit (BMT.exe). If toolkit is not yet registered, a registration dialog box must be filled-up before BMT.exe is extracted. After extraction, you can run the toolkit by launching BMT.exe. You can make a shortcut for it if you want but DO NOT RENAME BMT.EXE, it will not run if you do.
Updates 2.10.01:
-Bug-fix on Old Series mac change (Wimax UserID/Password not saved after reboot). However, to make old series mac changes permanent, reboot modem and do not close tool until reboot is finished and current settings are refreshed.
-Step = 1 now interprets to: +2 for old series mac (previously +1 only); +4 to new series mac (previously +4 also)
Updates 2.10:
-Bug-fix on sniper hang after mac change
-"Use Base MAC List" method can now also be continued on next sniping session
-Base MAC List is automatically sorted in the notepad itself after a sniping session. Indexes are also shown.
-New "Pass" and "Index" counters for monitoring position in the list of current-base-mac under test.
Updates 2.09.01-02:
-Removed unnecessary Gemtek Frequency Range command with syntax error which causes errors in DV235T
-Bug-fixes for Wimax Password generation
-Bug-fixes for sniping time display
Updates 2.09:
-Multiple Base MACs per sniping session (Old and New Series MACs can mix in one sniping session!)
-Sniping sessions are saved. Click on [Snipe 1 & Stay] or [Snipe All] to continue the previous session.
click [New Session] button to re-start session from beginning of list or when you wan to enter a new list.
-New [Clean-up] button to sort and remove duplicates from the selected mac history file.
-The initial tab displayed is the Sniping Tab which is the one frequently used.
Run the program. This is the initial screen:
After a split-second, if modem is detected:
If everything is fine, you will be directed to the MAC Sniper/Tester tab (which is more frequently used) and this is what you'll see:
If you click on the MAC Changer tab, the display will look something like this:
OTHER SCENARIOS DURING STARTUP:
1. Modem Inaccessible
POSSIBLE REASONS:
1.Wrong wimax model
2.Modem is not yet finished booting up
3.There is problem with the LAN cable connection (Local Area Connection was automatically checked already)
4. IP address is different from program setting
WHAT CAN BE DONE?
1. Replace modem with allowed models (BM622m/BM623m/DV235T-for-globe only)
2. Wait for the modem to finish the boot up process (bottom signal-LED blinking) before clicking [Yes] again.
3. Check your LAN cable and that Local Area Connection is not disabled
4. To change programs default IP, click [No] and follow the screenshots below:
4a. Click [Set Default IP] button
4b. Change IP to the modem's correct IP address (sorry for the label "Router IP", I will change that later). Then click [Save & Check] button
4c. If modem is still inaccesible, you will see this. However, the IP you entered will still be saved for the program to use
4d. If new IP is correct and modem is accesible, you will see this:
Click [Close] button and modem current settings will be checked again.
2. Modem SSH cannot be launched
POSSIBLE REASONS:
1.Modem's SSH Server is not enabled
2.Modem is not BM622m model but one different with the same Default IP address.
WHAT CAN BE DONE?
1. If firmware version is 2012, click yes to enable SSH automatically
2. If firmware version is not 2012 (or other models like 623m), click [No] and enable the SSH manually (please refer to other tutorials how to do this)
3. click [No], replace modem with appropriate one, click [Repair LAN] then click [Refresh] button afterwards.
USING THE SNIPER
* Note: MACS can be entered with or without colons ( : ); other non-hex characters and white-spaces are ignored; only the first 12-hex-characters of the line is read and validated.
For example:
If you enter these values in MACList.txt (Base MAc List file) at ang inilagay nyo sa STEP is 1:
34CDBEBD6C88 <-- new series
34CDBEBD6C7C <-- new series
E8:CD:2D:BF:96:a8 <-- new series
04:c0:6f:03:28:3c <-- old series
34:CD:BE:BD:6C:7C <-- new series (duplicate na ito ng 2nd mac)
(note: sinadya ko lagyan ng duplicate mac)
2. ang unang gagawin ng tool before sniping is sort the list at iremove ang duplicates, ito rin ang itetest ng sniper sa 1st pass:
04:C0:6F:03:28:3C
34:CD:BE:BD:6C:7C
34:CD:BE:BD:6C:88
E8:CD:2D:BF:96:A8
3. 2nd pass, eto na ang matetest na macs
04:C0:6F:03:28:3E <-- +2 dahil old series mac
34:CD:BE:BD:6C:80 <-- +4 dahil new series mac
34:CD:BE:BD:6C:8C <-- +4 dahil new series mac
E8:CD:2D:BF:96:AC <-- +4 dahil new series mac
4. 3nd pass, eto na ang matetest na macs
04:C0:6F:03:28:40 <-- +2 dahil old series mac
34:CD:BE:BD:6C:84 <-- +4 dahil new series mac
34:CD:BE:BD:6C:90 <-- +4 dahil new series mac
E8:CD:2D:BF:96:B0 <-- +4 dahil new series mac
5. 4th pass, eto na ang matetest na macs
04:C0:6F:03:28:42 <-- +2 dahil old series mac
..................................<-- hindi na itetest ang series na to dahil nag-abot na sa 3rd base mac (34:CD:BE:BD:6C:88)
34:CD:BE:BD:6C:94 <-- +4 dahil new series mac
E8:CD:2D:BF:96:B4 <-- +4 dahil new series mac
6. 5th pass, eto na ang matetest na macs
04:C0:6F:03:28:44 <-- +2 dahil old series mac
34:CD:BE:BD:6C:98 <-- +4 dahil new series mac
E8:CD:2D:BF:96:B8 <-- +4 dahil new series mac
and so on
Pero kung ang ginawa nyong STEP is 2:
1. 1st pass:
04:C0:6F:03:28:3C
34:CD:BE:BD:6C:7C
34:CD:BE:BD:6C:88
E8:CD:2D:BF:96:A8
2. 2nd pass, eto na ang matetest na macs
04:C0:6F:03:28:40 <-- +4 dahil old series mac
34:CD:BE:BD:6C:84 <-- +8 dahil new series mac
34:CD:BE:BD:6C:90 <-- +8 dahil new series mac
E8:CD:2D:BF:96:B0 <-- +8 dahil new series mac
3. 3nd pass, eto na ang matetest na macs
04:C0:6F:03:28:44 <-- +4 dahil old series mac
...................................<-- hindi na itetest ang series na to dahil nag-abot na sa 3rd base mac (34:CD:BE:BD:6C:88)
34:CD:BE:BD:6C:98 <-- +8 dahil new series mac
E8:CD:2D:BF:96:B8 <-- +8 dahil new series mac
4. 4th pass, eto na ang matetest na macs
04:C0:6F:03:28:48 <-- +4 dahil old series mac
34:CD:BE:BD:6C:A0 <-- +8 dahil new series mac
E8:CD:2D:BF:96:C0 <-- +8 dahil new series mac
and so on
New in version 2.10.03
Just input new series prefix (1st four Hex digits only). One series per line then save the file. The series below will automatically show the next time you edit the list plus the new ones that you added...
TO BE CONTINUED....
PLEASE DITO LANG PO SA THREAD MAG-POST NG TANONG TUNGKOL SA GUIDE. WAG NYO PO AKO I-PM OR I-TEXT DAHIL BUSY PO AKO NOWADAYS. EXPLORE-EXPLORE LANG AND SOME COMMON SENSE...
Last edited:
