Cherry Mobile Fusion Aura [ROOTED]

[Azureal]

Just sharing...wala pako nakikitang rooting instructions kahit saan eh....screeshots later nalang at may pasok pako....still need to edit dahil di ko pa din mapagana ung SDcard nya...

[DO NOT USE TOWELROOT - Useless for fusion aura...the unit will just hangup/freeze up ]

Software needed

Kingoroot - http://www.kingoapp.com/
Rootchecker - https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
SDFix - https://play.google.com/store/apps/details?id=nextapp.sdfix&hl=en


[Rooting]

Simple at tyaga lang

1. Connect unit to PC

*Make sure that the PC recognizes the android device...it may prompt you for unknown driver...just retry and allow installation of unknown driver

2. Run Kingo
3. Root!!

but not that easy eto conflicts (based on xp...lol)

- Kingo may freeze/hang up on fetching script part

what to do
*Close Kingo - relaunch,retry
*unplug/replug usb connection
- Kingo will say the device is rooted on the first time device is recognized - select Root again and ignore the message that device is rooted

Confirm if device is rooted using rootchecker,sometimes Kingo will say device is rooted but it's not,just repeat steps 1-3

once confirmed....congrats

[DISCLAIMER] - I assume no liability if this fails for you...I'm just sharing on my success in rooting my unit and the steps I did

 

[romenick15]

Working na working brad salamat
Ung una talaga nagfreeze sa fetching script then gawin lang ung "what to do" then 2nd try naroot na

 

[Azureal]

no problem...problema ko padin ung sa sdcard.....kung alam ko lang problema un sa kitkat dpat hindi na to binili ko...ahaha

 

[chxyjen]

Mga kuya... Etatry q sana to kaso di ma recognize ung tab as PC...nag Google na AQ kaso diparin OK yung driver...San po AQ mka download ng driver said tab on to...fusion aura rin po ung tab q..

 

[nazram21]

Question lang po. Yung fusion aura is kakabili ko lang. Tapos nalagyan ko na ng pattern at nakalimutan ko.. panu kaya yun?
Tia

 

[princemark]

Question lang po. Yung fusion aura is kakabili ko lang. Tapos nalagyan ko na ng pattern at nakalimutan ko.. panu kaya yun?
Tia

Sir Suggestion lang po.. If wala ka naman po Files ke Aura, Hard Reset mu n lang po..

Try this po :

*turn off your device.

*press volume up+down+power button for 3 to 5 seconds then release buttons.

*when the cherry mobile logo show up hold the volume up until the recovery mode pop up.

*use the volume down to navigate then power button to select.

*Scroll down to "Wipe data/factory reset" and click on it.

*Scroll down to "Yes -- delete all user data" and click on it.

*After "Data wipe complete" click on "reboot system now"

Note : Try @ your own Risk

Goodluck

 

[primoberdugo]

Good Day, ask ko lang po kung meron po bang ways para mailipat ko ang mga apps ko sa sd card, wala kasing option na ganito sa cm fusion aura, or kung may ways to downgrade from kitkat to ics/jb, masyado po kasing maliit ang 2gb rom para sa akin, hindi ko pa po nasusubukan ang external2internal kasi nga po hindi pa ako rooted. Thanks po sa sasagot.

 

[glider311]

Sir Suggestion lang po.. If wala ka naman po Files ke Aura, Hard Reset mu n lang po..

Try this po :

*turn off your device.

*press volume up+down+power button for 3 to 5 seconds then release buttons.

*when the cherry mobile logo show up hold the volume up until the recovery mode pop up.

*use the volume down to navigate then power button to select.

*Scroll down to "Wipe data/factory reset" and click on it.

*Scroll down to "Yes -- delete all user data" and click on it.

*After "Data wipe complete" click on "reboot system now"

Note : Try @ your own Risk

Goodluck

bossing sinubukan ko po ito ayaw po talaga pumasok sa recovery meron pa po bang ibang paraan para mareset ang pattern nya?

 

[Azureal]

Mga kuya... Etatry q sana to kaso di ma recognize ung tab as PC...nag Google na AQ kaso diparin OK yung driver...San po AQ mka download ng driver said tab on to...fusion aura rin po ung tab q..

unplug the unit then replug lng...till maginstall sya ng [ANDROID]..make sure na ung cable is working properly...3-5 times siguro sakin bago naginstall ng android drivers at marecognize ng kingo

 

[kennconsuelo]

unplug the unit then replug lng...till maginstall sya ng [ANDROID]..make sure na ung cable is working properly...3-5 times siguro sakin bago naginstall ng android drivers at marecognize ng kingo

need firmware po cherry mobile fusion aura,...nag bootloader na po pagtapos ko mag install ng new boot animation,..

 

[jheastig21]

Just sharing...wala pako nakikitang rooting instructions kahit saan eh....screeshots later nalang at may pasok pako....still need to edit dahil di ko pa din mapagana ung SDcard nya...

[DO NOT USE TOWELROOT - Useless for fusion aura...the unit will just hangup/freeze up ]

Software needed

Kingoroot - http://www.kingoapp.com/
Rootchecker - https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
SDFix - https://play.google.com/store/apps/details?id=nextapp.sdfix&hl=en


[Rooting]

Simple at tyaga lang

1. Connect unit to PC

*Make sure that the PC recognizes the android device...it may prompt you for unknown driver...just retry and allow installation of unknown driver

2. Run Kingo
3. Root!!

but not that easy eto conflicts (based on xp...lol)

- Kingo may freeze/hang up on fetching script part

what to do
*Close Kingo - relaunch,retry
*unplug/replug usb connection
- Kingo will say the device is rooted on the first time device is recognized - select Root again and ignore the message that device is rooted

Confirm if device is rooted using rootchecker,sometimes Kingo will say device is rooted but it's not,just repeat steps 1-3

once confirmed....congrats

[DISCLAIMER] - I assume no liability if this fails for you...I'm just sharing on my success in rooting my unit and the steps I did

work on my fusion aura salamat guys!

 

[th3saint]

guys pa help nainstall ko na sdfix. pero wala pa din option move to sd card sa application po.

 

[jerulim]

Working ba talaga to? Mag iisang buwan ko na to na tina try. Ayaw talaga ma root ng fusion aura ko

 

[th3saint]

Working ba talaga to? Mag iisang buwan ko na to na tina try. Ayaw talaga ma root ng fusion aura ko

working tol kaso sabi ko nga hindi ko ma-move app sa sd. wala pa ding option sa App pagkatapos ko activate sdfix.

 

[yajnayr21]

patulong mga sir,, no response na ang touch screen ng fusion aura ko after ko iapply tong tut na to ng paulit ulit,, nireflash ko narin gamit ang phoenix pero di parin naayos,,.. anu kaya naging problem dito?

 

[jerulim]

ayaw talaga ma root.any settings?ano pa ba gagawin?thanks

 

[diosah0131]

Hello po!
I purchased Fusion Aura last Sept.6, 2014 in SM Marilao together with 8 GB mem.card. I hardly use this device since I'm not a techie person, I'm using this tab only for reading ebooks while on my way to work. Last night, I was surprised I can't unlock the screen. It's unresponsive in whatever I do (tap, swipe, unlock the screen) so I decided to return the device in the mall today. After inspecting the device, I was told that UNRESPONSIVE SCREEN ISSUE was due to full internal memory usage. I felt a bit stupid during that time bec I have a SD card but I didn't use it. Well unfortunately, 7 days replacement due to factory defect lapsed already. But I was advised to bring it to their service centers to REFORMAT the device since it is still covered by their 1 year warranty located in SM North and Malolos near Paradise Resort. Upon searching I saw this, and tried doing Hard Reset hoping it will help me avoid the hassle of going to the Service Center. But nothing happens and the problem is still the same, screen is unresponsive.

QUESTION:
1. Is it true that unresponsive screen is due to full internal memory usage?
2. Did I make the problem of the tab worse after doing Hard Reset?
3. Is there any way to fix this without going to service center bec I saw on a blog that it takes time before they resolve/fix the device.

Thank you very much for your replies. God Bless

Sir Suggestion lang po.. If wala ka naman po Files ke Aura, Hard Reset mu n lang po..

Try this po :

*turn off your device.

*press volume up+down+power button for 3 to 5 seconds then release buttons.

*when the cherry mobile logo show up hold the volume up until the recovery mode pop up.

*use the volume down to navigate then power button to select.

*Scroll down to "Wipe data/factory reset" and click on it.

*Scroll down to "Yes -- delete all user data" and click on it.

*After "Data wipe complete" click on "reboot system now"

Note : Try @ your own Risk

Goodluck

 

[CdzLoki]

Mga kuya... Etatry q sana to kaso di ma recognize ung tab as PC...nag Google na AQ kaso diparin OK yung driver...San po AQ mka download ng driver said tab on to...fusion aura rin po ung tab q..

Chexyjen ito gawin mo para mahanap mo ang driver ng cm fusion aura .

1st step - download mo to sa pc mo http://adbdriver.com/downloads/ [Adb Driver Installer (9.0 MB)]

2nd step - install mo to sa tab mo ADB Toggle (80 KB).

3rd step - pag tapos na connect mo tab mo sa pc syempre open mo yung debugging ok!

4rt step - run mo yong adbdriver dapat connect ang tab mo sa pc para sya na mag hahanap ng driver sa tab mo .

Pag na install na gayahin mo na yung turo ni #Azureal

tapos install kana rin ng pang lipat ng apps sa tab mo yun ok na!

pinaguran ko to para madami pang game ang malalagay ko .

 

[tepok4]

nag error sa akin, connection unstability lumalabas bat kaya

 

[b0set]

boss question lng di ko kc ma activate / checked ung usb debugging ko e any help? di ko xa ma enable TiA