- Messages
- 2,396
- Reaction score
- 1
- Points
- 28
Do you have internet in your PC and want to share it and connect with other device such as Nintendo DS, Playstation Portable, Wii, PS3, mobile phone or laptop etc?
Do you want to create home hotspot (access point) in cheaper way aside from wifi router?
this guide is very useful especially if you are using usb 3G modem (broadband)
This is the right thread for you!
NEWS!!! this is now fully compatible with win7 by downloading drivers from cdr king
http://www.symbianize.com/showpost.php?p=9885283&postcount=196
WHAT YOU WILL NEED?
-PC (of course, desktop or laptop)
-Internet connection (dsl or broadband e.g. tattoo, smartbro, weroam, etc) -kung nababasa mo to meron ka nun
-Consoles (NDS, PSP, WII, PS3 or other devices you would like to connect to internet)
-wireless LAN USB2.0 adapter
GETTING STARTED.
1.We will use PLDT weroam for this tutorial, wireless LAN USB2.0 adapter by cdr-king (650php)
i use this another usb wlan as it is compatible with DSlite for WEP encryption and much cheaper to support AP mode http://www.symbianize.com/showpost.php?p=7759454&postcount=165
TAKE NOTE: You can try other usb wlan from cdr king provided you are sure that it support AP mode (it is different from infrastructure mode and ad hoc mode).
Please see attached for other configuration i have setup.
2.Connect to the internet using any of your available broadband or DSL line.
3.Install drivers for your wireless LAN USB2.0.
4.Plug your wireless LAN USB2.0 adapter device and let windows xp load its drivers.
5.Run "REALTEK RTL8187 Wireless LAN Utility". This shortcut is created after installing your driver (included miniCD of the device).
6a. NO PASSWORD. Setup your wireless lan to be an Access Point (AP). see attached images for steps
6b. WITH PASSWORD, Setup your wireless lan to be an Access Point (AP). Take note for ASCII its 5 or 13 chars only
7.connect your device.
8. ENJOY PLAYING!ü
NOTE: In some cases, you need to enable internet sharing of your active connection first!
1. Go to start > control panel > open network connections
2. Right click your active connection (PLDT weroam in my case) then click properties
3. At advance tab, check "Allow other network users to connect through this computers internet connection". Set home networking connection to "wireless network connection". Click OK.
4. Proceed to the getting started steps.
Notes:
Other devices like mobile phones, laptops can also connect to your access point for internet.
Tested on my Wii/DS/pocketpc
Turn OFF your FIREWALL or turn it to minimum protection level.
WINDOWS 7 WORKAROUND
1. install xpmode in the following sequence (after installation, reboot is required)
a. windows xpmode
b. KB958559 (if you are using 64bit, pls find appropriate counterpart)
c. KB977206 (if you are using 64bit, pls find appropriate counterpart)
2. run xp mode, start > windows virtual pc > windows xp mode
3. install wireless lan adapter inside XP mode.
4. plugin your wirless lan adapter, then attach it inside xp mode
5. follow getting started on how to setup access point.
Connectify for Win7(if you are using laptop with built-in wifi, you can share internet using connectify but with encryption WPA2, so sorry if you are going to connect your DS as it is using WEP encryption)
1. install connectify
2. if no available wireless lan, it will show "no wifi device present"
3. Plugin your wireless lan adapter and let win7 load its drivers
4. allow connectify if you have antivirus blocking it
5. setup/configure connectify
6. Enjoy connecting your device
My Nintendo DS wont connect with this type of connection since it can only connect to WEP
encryption but good thing my pocketpc can connect with this.
Please note that only wpa2 is available for encryption. Read from their site for limitations
and FAQs.
QA from this link
Q: What is an Access Point?
A: Your Access Point is a transparent Media Access Control (MAC) bridge that provides access for wireless stations to a wired local area network (LAN). With an Access Point, wireless workstations can be added quickly and easily to an existing wired network.
Q. What is WEP?
A: There are two levels of WEP Encryption - 64 and 128 bit. You may also have heard the number 40-bit used in conjunction with WEP Encryption. 40-bit WEP and 64-bit WEP are two different names for the same encryption method. This level of WEP encryption has been called 40-bit because it uses a 40-bit secret key along with a 24-bit Initialization Vector (40 + 24 = 64). Because there has been no official standardization of these terms, wireless vendors may use either name.
Q: What is Infrastructure Mode?
A: An integrated wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable to enterprise scale for wireless access to central database, or wireless application for mobile workers.
Q: What is Ad Hoc Mode?
A: An Ad-Hoc wireless LAN is a group of computers, each with a Wireless LAN adapter, connected as an independent wireless LAN. Ad hoc wireless LANs are applicable at a departmental scale or SOHO operation. They operate on a peer-to-peer basis.
Q. What is the IEEE 802.11 standard?
A: The IEEE 802.11 Wireless LAN standards subcommittee, which is formulating a standard for the industry. The objective is to enable wireless LAN hardware from different manufacturers to communicate.
sori guys na messed up yung thread. nawala yung win7 workaround
re-up ko nalang including connectify me steps.
download drivers of LP-8187e and Ralink WF-5408 here
http://www.symbianize.com/showpost.php?p=12156031&postcount=220
Do you want to create home hotspot (access point) in cheaper way aside from wifi router?
this guide is very useful especially if you are using usb 3G modem (broadband)
This is the right thread for you!
NEWS!!! this is now fully compatible with win7 by downloading drivers from cdr king
http://www.symbianize.com/showpost.php?p=9885283&postcount=196
WHAT YOU WILL NEED?
-PC (of course, desktop or laptop)
-Internet connection (dsl or broadband e.g. tattoo, smartbro, weroam, etc) -kung nababasa mo to meron ka nun
-Consoles (NDS, PSP, WII, PS3 or other devices you would like to connect to internet)
-wireless LAN USB2.0 adapter
GETTING STARTED.
1.We will use PLDT weroam for this tutorial, wireless LAN USB2.0 adapter by cdr-king (650php)
i use this another usb wlan as it is compatible with DSlite for WEP encryption and much cheaper to support AP mode http://www.symbianize.com/showpost.php?p=7759454&postcount=165
TAKE NOTE: You can try other usb wlan from cdr king provided you are sure that it support AP mode (it is different from infrastructure mode and ad hoc mode).
Please see attached for other configuration i have setup.
2.Connect to the internet using any of your available broadband or DSL line.
3.Install drivers for your wireless LAN USB2.0.
4.Plug your wireless LAN USB2.0 adapter device and let windows xp load its drivers.
5.Run "REALTEK RTL8187 Wireless LAN Utility". This shortcut is created after installing your driver (included miniCD of the device).
6a. NO PASSWORD. Setup your wireless lan to be an Access Point (AP). see attached images for steps
6b. WITH PASSWORD, Setup your wireless lan to be an Access Point (AP). Take note for ASCII its 5 or 13 chars only
7.connect your device.
8. ENJOY PLAYING!ü
NOTE: In some cases, you need to enable internet sharing of your active connection first!
1. Go to start > control panel > open network connections
2. Right click your active connection (PLDT weroam in my case) then click properties
3. At advance tab, check "Allow other network users to connect through this computers internet connection". Set home networking connection to "wireless network connection". Click OK.
4. Proceed to the getting started steps.
Notes:
Other devices like mobile phones, laptops can also connect to your access point for internet.
Tested on my Wii/DS/pocketpc
Turn OFF your FIREWALL or turn it to minimum protection level.
WINDOWS 7 WORKAROUND
1. install xpmode in the following sequence (after installation, reboot is required)
a. windows xpmode
b. KB958559 (if you are using 64bit, pls find appropriate counterpart)
c. KB977206 (if you are using 64bit, pls find appropriate counterpart)
2. run xp mode, start > windows virtual pc > windows xp mode
3. install wireless lan adapter inside XP mode.
4. plugin your wirless lan adapter, then attach it inside xp mode
5. follow getting started on how to setup access point.
Connectify for Win7(if you are using laptop with built-in wifi, you can share internet using connectify but with encryption WPA2, so sorry if you are going to connect your DS as it is using WEP encryption)
1. install connectify
2. if no available wireless lan, it will show "no wifi device present"
3. Plugin your wireless lan adapter and let win7 load its drivers
4. allow connectify if you have antivirus blocking it
5. setup/configure connectify
6. Enjoy connecting your device
My Nintendo DS wont connect with this type of connection since it can only connect to WEP
encryption but good thing my pocketpc can connect with this.
Please note that only wpa2 is available for encryption. Read from their site for limitations
and FAQs.
QA from this link
Q: What is an Access Point?
A: Your Access Point is a transparent Media Access Control (MAC) bridge that provides access for wireless stations to a wired local area network (LAN). With an Access Point, wireless workstations can be added quickly and easily to an existing wired network.
Q. What is WEP?
A: There are two levels of WEP Encryption - 64 and 128 bit. You may also have heard the number 40-bit used in conjunction with WEP Encryption. 40-bit WEP and 64-bit WEP are two different names for the same encryption method. This level of WEP encryption has been called 40-bit because it uses a 40-bit secret key along with a 24-bit Initialization Vector (40 + 24 = 64). Because there has been no official standardization of these terms, wireless vendors may use either name.
Q: What is Infrastructure Mode?
A: An integrated wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable to enterprise scale for wireless access to central database, or wireless application for mobile workers.
Q: What is Ad Hoc Mode?
A: An Ad-Hoc wireless LAN is a group of computers, each with a Wireless LAN adapter, connected as an independent wireless LAN. Ad hoc wireless LANs are applicable at a departmental scale or SOHO operation. They operate on a peer-to-peer basis.
Q. What is the IEEE 802.11 standard?
A: The IEEE 802.11 Wireless LAN standards subcommittee, which is formulating a standard for the industry. The objective is to enable wireless LAN hardware from different manufacturers to communicate.
sori guys na messed up yung thread. nawala yung win7 workaround
re-up ko nalang including connectify me steps.
download drivers of LP-8187e and Ralink WF-5408 here
http://www.symbianize.com/showpost.php?p=12156031&postcount=220
Last edited:
alot for this one sir!!! 
keep it up!
