★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series★★★★

g00drich · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

Balik ako dito pagdumating na si dv ko. :thanks:

thinelev · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

g00drich said:
Balik ako dito pagdumating na si dv ko.

No Problem Sir

speedking said:
tanong lang ts, pwede na ba ma change mac agad gamit ang tools na to ang disconnected dv235t?
i mean wala na bang babaguhin sa modem like firmware upgrade? pasensya newbie pa lang po sa dv235t

Pwde sir pero kung first time mo gagamitin ang DV mo mas maganda check mo muna settings.

or gumamit ka ng script or tool para sa protection.

d3v1lcRy said:
triny ko kaso d gumana nag factory reset pa ,,nwala pa wifi ko hays kala ko ba no reboot bat nag factory reset ??

Ganun?? wala naman nakalagay sa script na Reset Factory.. paki check baka ibang script ang nagamit mo or meron ka na edit sa script.

arn_is_yours · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

Salamat nito at working agad ung globo mac ko sa dv,
View attachment 182465

*Add ko lang po sir, wla po kasing FREQUENCY na naka set sa script mo na pang Globe. So pag may user na galing sa TRAMS na gustong gamitin ang GLOBO mcdo eh talagang di sila maka-connect ng dahil wlang FREQUENCY na naka set for GLOBO tanging TRAMS lang. Kasi yan nangyari sakin nagtaka ako na working ung macdo ko sa tabo then ayaw sa DV. What i did eh ine-dit ko ung FREQUENCY nila. Anyways, MARAMING SALAMAT PO DITO!

speedking · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

thinelev said:
Pwde sir pero kung first time mo gagamitin ang DV mo mas maganda check mo muna settings.

or gumamit ka ng script or tool para sa protection.

Ganun?? wala naman nakalagay sa script na Reset Factory.. paki check baka ibang script ang nagamit mo or meron ka na edit sa script.

paano po ba tamang settings ng ng dv235t boss?
paturo naman po kahit link lang ng TUT ng mga tamang
procedure para mabuhay ko ulit dv235t bigay sa akin ng kumpare ko
para di naman masyadong spoon feeding, salamat po boss sa pagtulong :salute:

thinelev · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

speedking said:
paano po ba tamang settings ng ng dv235t boss?
paturo naman po kahit link lang ng TUT ng mga tamang
procedure para mabuhay ko ulit dv235t bigay sa akin ng kumpare ko
para di naman masyadong spoon feeding, salamat po boss sa pagtulong

Mamili ka

Script

http://www.symbianize.com/showthread.php?t=1132339

or

Tool

mybro-kentool.blogspot.com

gerald191091 · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

ts inedit ko yung script nag add lang ako ng frequency ng globe

thinelev · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

arn_is_yours said:
Salamat nito at working agad ung globo mac ko sa dv,
View attachment 955699

*Add ko lang po sir, wla po kasing FREQUENCY na naka set sa script mo na pang Globe. So pag may user na galing sa TRAMS na gustong gamitin ang GLOBO mcdo eh talagang di sila maka-connect ng dahil wlang FREQUENCY na naka set for GLOBO tanging TRAMS lang. Kasi yan nangyari sakin nagtaka ako na working ung macdo ko sa tabo then ayaw sa DV. What i did eh ine-dit ko ung FREQUENCY nila. Anyways, MARAMING SALAMAT PO DITO!

gerald191091 said:
ts inedit ko yung script nag add lang ako ng frequency ng globe

walang problema....

banme · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

IDOL! isa k talagang ALAMAT! sana po maglabas k n dn po ng TURBO MODE SNIPING ng DV-235t po! hehehe.... bilib ako sau pre kasi open source talaga po!

SALAMAT!!!!!

rantatera · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

Thanks dito sir! Works perfectly!

thinelev · Aug 26, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

banme said:
IDOL! isa k talagang ALAMAT! sana po maglabas k n dn po ng TURBO MODE SNIPING ng DV-235t po! hehehe.... bilib ako sau pre kasi open source talaga po!

SALAMAT!!!!!

rantatera said:
Thanks dito sir! Works perfectly!

Walang anuman

kenxqt · Aug 27, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

may pang 22m ka din po sir???pki link nmn salamat...hehe

korakwinband · Aug 27, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

oo nga ako din T naencounter ko nag-fafactory reset..check mo po boss dun sa telnet logs

thinelev · Aug 27, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

korakwinband said:
oo nga ako din T naencounter ko nag-fafactory reset..check mo po boss dun sa telnet logs

Eto yun Output File ng Telnet ng Script.

Code:

Login:mt7109
mt7109
Password: wimax

# ifconfig $CMD wmx0 down
ifconfig $CMD wmx0 down
# sncfg $CMD dset WAN_MAC_ENCRY 6416F07FB07A
sncfg $CMD dset WAN_MAC_ENCRY 6416F07FB07A
# sncfg $CMD dset WAN_MAC 64:16:F0:7F:B0:7A
sncfg $CMD dset WAN_MAC 64:16:F0:7F:B0:7A
# sncfg $CMD dset LAN_MAC 64:16:F0:7F:B0:7B
sncfg $CMD dset LAN_MAC 64:16:F0:7F:B0:7B
# sncfg $CMD dset WMX_ANONYMOUS_ID [email][email protected][/email]
sncfg $CMD dset WMX_ANONYMOUS_ID [email][email protected][/email]
# sncfg $CMD dset WMX_USER_NAME [email][email protected][/email]
sncfg $CMD dset WMX_USER_NAME [email][email protected][/email]
# sncfg $CMD dset WMX_PASSW 2008B6ByVOSPRDMB
sncfg $CMD dset WMX_PASSW 2008B6ByVOSPRDMB
# sncfg $CMD commit
sncfg $CMD commit
# sncfg $CMD reload
sncfg $CMD reload
# sncfg $CMD default
sncfg $CMD default
[COLOR="#800000"]LIBSNCFG][10106] read(4) @ safe_read() failed : Resource temporarily unavailable !![/COLOR]
# ifconfig wmx0 down
ifconfig wmx0 down
# ifconfig wmx0 hw ether 64:16:F0:7F:B0:7A
ifconfig wmx0 hw ether 64:16:F0:7F:B0:7A
# ifconfig wmx0 up
ifconfig wmx0 up
# sncfg $CMD wimax disconnect
sncfg $CMD wimax disconnect
# sncfg $CMD wimax connect
sncfg $CMD wimax connect
# exit
exit

Eto ba yun tinutukoy mo factory reset???

[LIBSNCFG][10106] read(4) @ safe_read() failed : Resource temporarily unavailable !!

after nito hindi naman nagrereboot modem ko. eto lagi ang gamit ko pag napapalit ako so more than 50 times ko na nagamit etong script at working naman sa karamihan.

nakapag factory reset nadin ako ng DV ko pero parang ganito yun lumalabas na command before magreboot ang modem..

/factoryreset triggered.... hindi ko matandaan parang meron din read(4) @ safe_read() failed then mag rereboot na modem..

baka meron sya issue sa Firmware Version ang sncfg default command.. ang gamit ko nga pala ay Version 7

kung gusto mo edit mo nalang yun script baguhin mo yun sncfg default to sncfg reset, kaya lang pag reboot ng modem balik sa dating mac yan.

sa pag report

- - - Updated - - -

Nag Factory Reset ako para sayo

eto ang ang lumabas sa Telnet Output file ko..

Code:

# /factoryreset.sh
/factoryreset.sh
Factory Reset Triggered !!
[LIBSNCFG][14743] read(4) @ safe_read() failed : Resource temporarily unavailable !!
# exit
exit

Pareho din ba sayo??

manalon42 · Aug 27, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

Natapos din mag back read. . factory reset ata ang problema

. . . Anyway. pwede ba magamit ung script mo ts sa pag snipe ng mac ? kung pwede pano po ba gagawin ko?? salamat po

cxruzer · Aug 27, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

Bossing,,panu pala papalitan ng gusto mong mac ung script...?...alin dun ung ieedit...?

gerald191091 · Aug 27, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

tol thinelev ang ginawa ko ibis na sncfg dset pinalitan ko ng sncfg set, tapos tinanggal ko na lang yung sncfg default working fine na ulit

thinelev · Aug 27, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

manalon42 said:
Natapos din mag back read. . factory reset ata ang problema . . . Anyway. pwede ba magamit ung script mo ts sa pag snipe ng mac ? kung pwede pano po ba gagawin ko?? salamat po

Walang Factory Reset Command ang script na eto...... at sa sniper hindi ko alam kung panu gagawin

cxruzer said:
Bossing,,panu pala papalitan ng gusto mong mac ung script...?...alin dun ung ieedit...?

Open mo ang wsf file sa notepad, hanapin mo ang "Sub WriteTSTNewSeries" for New Series & "Sub WriteTSTOldSeries" for Old Series. yun na makikita mo jan edit mo nalang...

gerald191091 said:
tol thinelev ang ginawa ko ibis na sncfg dset pinalitan ko ng sncfg set, tapos tinanggal ko na lang yung sncfg default working fine na ulit

Nice gerald191091

Pwede ninyo naman edit ang script kung hindi angkop ang mga commands para sa DV or ibang modem na gamit ninyo

korakwinband · Aug 27, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

thinelev said:
Eto yun Output File ng Telnet ng Script.

Code:

Login:mt7109 mt7109 Password: wimax # ifconfig $CMD wmx0 down ifconfig $CMD wmx0 down # sncfg $CMD dset WAN_MAC_ENCRY 6416F07FB07A sncfg $CMD dset WAN_MAC_ENCRY 6416F07FB07A # sncfg $CMD dset WAN_MAC 64:16:F0:7F:B0:7A sncfg $CMD dset WAN_MAC 64:16:F0:7F:B0:7A # sncfg $CMD dset LAN_MAC 64:16:F0:7F:B0:7B sncfg $CMD dset LAN_MAC 64:16:F0:7F:B0:7B # sncfg $CMD dset WMX_ANONYMOUS_ID [email][email protected][/email] sncfg $CMD dset WMX_ANONYMOUS_ID [email][email protected][/email] # sncfg $CMD dset WMX_USER_NAME [email][email protected][/email] sncfg $CMD dset WMX_USER_NAME [email][email protected][/email] # sncfg $CMD dset WMX_PASSW 2008B6ByVOSPRDMB sncfg $CMD dset WMX_PASSW 2008B6ByVOSPRDMB # sncfg $CMD commit sncfg $CMD commit # sncfg $CMD reload sncfg $CMD reload # sncfg $CMD default sncfg $CMD default [COLOR="#800000"]LIBSNCFG][10106] read(4) @ safe_read() failed : Resource temporarily unavailable !![/COLOR] # ifconfig wmx0 down ifconfig wmx0 down # ifconfig wmx0 hw ether 64:16:F0:7F:B0:7A ifconfig wmx0 hw ether 64:16:F0:7F:B0:7A # ifconfig wmx0 up ifconfig wmx0 up # sncfg $CMD wimax disconnect sncfg $CMD wimax disconnect # sncfg $CMD wimax connect sncfg $CMD wimax connect # exit exit

Eto ba yun tinutukoy mo factory reset???

[LIBSNCFG][10106] read(4) @ safe_read() failed : Resource temporarily unavailable !!

after nito hindi naman nagrereboot modem ko. eto lagi ang gamit ko pag napapalit ako so more than 50 times ko na nagamit etong script at working naman sa karamihan.

nakapag factory reset nadin ako ng DV ko pero parang ganito yun lumalabas na command before magreboot ang modem..

/factoryreset triggered.... hindi ko matandaan parang meron din read(4) @ safe_read() failed then mag rereboot na modem..

baka meron sya issue sa Firmware Version ang sncfg default command.. ang gamit ko nga pala ay Version 7

kung gusto mo edit mo nalang yun script baguhin mo yun sncfg default to sncfg reset, kaya lang pag reboot ng modem balik sa dating mac yan.

sa pag report

- - - Updated - - -

Nag Factory Reset ako para sayo

eto ang ang lumabas sa Telnet Output file ko..

Code:

# /factoryreset.sh /factoryreset.sh Factory Reset Triggered !! [LIBSNCFG][14743] read(4) @ safe_read() failed : Resource temporarily unavailable !! # exit exit

Pareho din ba sayo??

mamaya TS sige pakita ko sayo yung log.
or maybe naisip ko din.my nabasa kasi ako na kapag nag-manual set ka lng ng protection mo sa DV235t eh kapag gumamit ka ng katulad netong application eh bumabalik sa default.manual set kasi ginawa ko eh.
pero mamaya try ko iset yung protection ko sa DV235t v7 using telnet.then feedback ako later.

update:
as per observation, yung admin password ko bumabalik sa admin admin.
maliban dun wala ng iba pang nababago...

3rd update
I think eto ang solusyon.
need nyo muna gumawa ng protection sa DV nyo.
using telnet.
sample is like this.

Set jonjon = CreateObject("WScript.Shell")

jonjon.run"cmd"
WScript.Sleep 200

jonjon.Sendkeys"echo off{Enter}"
WScript.Sleep 200

jonjon.SendKeys"telnet 192.168.15.1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"mt7109{Enter}"
WScript.Sleep 200

jonjon.SendKeys"wimax{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset ADMIN_NAME admin{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset ADMIN_PASSWD '$1$k2I9hJe4$yEBYQLPI4VcVbDHeY/EU7/'{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset GUEST_NAME user{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset GUEST_PASSWD '$1$k2I9hJe4$snQF7Rzo9eGhEjXvU7ov.0'{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset POWERUSER_NAME korakwinband{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset POWERUSER_PASSWD '$1$k2I9hJe4$1VUZh4IeEXaCf4fFSmskd.'{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WAN_MAC_ENCRY C40528713B8C{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WAN_MAC C4:05:28:71:3B:8C{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset LAN_MAC C4:05:28:71:3B:8D{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_ANONYMOUS_ID [email protected]{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_USER_NAME [email protected]{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_PASSW Z_GzQ_-UxjkpFzDg{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_FREQ_BANDWDITH_FL 10000,10000,10000,10000,10000,10000,10000{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_FREQ_LIST 2507500,2602000,2612000,2638000,2622000,2505000,2510000{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_GEMTEK_FREQUENCY_RANGE_LH_BOUND 2300000KHz-2400000KHz,2490000KHz-2700000KHz{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_IGNORE_CERT 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_AUTO_PREPEND 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_RANDOM_OUTER_ID 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_SAME_EAP_OUTER_ID 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WMX_MAC_IN_OUTER_ID 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset MGMT_WEB_WAN 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset MGMT_TELNET_WAN 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset MGMT_SSH_WAN 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset HTTPD_ENABLE 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset HTTPD_PORT 80{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset HTTPSD_ENABLE 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset HTTPSD_PORT 443{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset TELNETD_ENABLE 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset TELNETD_PORT 23{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset MGMT_TELNET_LAN 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset SSHD_Enable 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset SSHD_PORT 22{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset MGMT_SSH_LAN 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset TR_ENABLE 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset TR_ACS_URL www.yahoo.com{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset TR_BOOTSTRAP 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset TR_ACS_USER JonjonPogi{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset TR_ACS_PASS totooyun{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset TR_INFORM_ENABLE 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset UPNP_ENABLE 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_DDOS_SYNFLOOD 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_DDOS_UDPFLOOD 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_DDOS_ICMPFLOOD 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_DDOS_PORTSCAN 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_DDOS_LANDATTACK 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_DDOS_IPSPOOF 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_DDOS_ICMPREDIRECT 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_DDOS_PINGOFDEATH 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_DDOS_PINGFROMWAN 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_ALG_FTP 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_ALG_H323 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_ALG_IPSEC 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_ALG_L2TP 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_ALG_PPTP 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_ALG_RTSP 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NETFILTER_ALG_SIP 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_WifiEnable 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_BssidNum 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_SSID1 SMARTBRO{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_WirelessMode 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_Channel 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_AutoChannelSelect 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_AuthMode WPA2PSK{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_EncrypType TKIP{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_AUTO_SecurityMode WPAPSK{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_AUTO_AuthMode WPAPSK{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_AUTO_EncrypType TKIP{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_WPAPSK1 SMARTSMART{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_HideSSID 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset WLAN_AUTO_MODE 0{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NTP_ENABLE 1{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg dset NTP_SERVER ntp.pagasa.dost.gov.ph{Enter}"
WScript.Sleep 200

jonjon.SendKeys"sncfg commit{Enter}"
WScript.Sleep 200

jonjon.SendKeys"/factoryreset.sh{Enter}"
WScript.Sleep 200

save nyo as vbs.
yung nakared color kayo na magpalit sa kung ano gusto nyo.
malaki na kayo alam nyo na yan.
this is what i think is the solusyon sa mga nakakaencounter ng nagrerestore sa default settings nya.
hope nakatulong.

thinelev · Aug 27, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

korakwinband said:
mamaya TS sige pakita ko sayo yung log.
or maybe naisip ko din.my nabasa kasi ako na kapag nag-manual set ka lng ng protection mo sa DV235t eh kapag gumamit ka ng katulad netong application eh bumabalik sa default.manual set kasi ginawa ko eh.
pero mamaya try ko iset yung protection ko sa DV235t v7 using telnet.then feedback ako later.

update:
as per observation, yung admin password ko bumabalik sa admin admin.
maliban dun wala ng iba pang nababago...

Ok thanks hintayin ko.. Siguro nga ganun kasi ang protection ko ginawa ko sa Telnet pati setup ng wifi Telnet din...

- - - Updated - - -

Update:

Nagtry ako magset ng settings through GUI then ginamit ko ang script....

after nun na undo yun ginawa kong settings.

unwol · Aug 28, 2014

Re: ★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series

sir meron ka ba para sa bm622i 2011? :praise:

★★★★DV235T MAC CHANGER (No Reboot) Script For New Series and Old Series★★★★

Proficient

The Fanatic

Apprentice

Attachments

Amateur

The Fanatic

Terminated Account

The Fanatic

The Patriot

The Saint

The Fanatic

Apprentice

Proficient

The Fanatic

The Devotee

Novice

Terminated Account

The Fanatic

Proficient

The Fanatic

Novice

Similar threads