BM622M CD problem help naman po..!

[kharton]

Mga sir ung bm622m 2012 q po ay ginawa ko dating green packet.. Ngdownload aq ng firmware ng (G. Packet) tinest ko lang kng anu magiging itsura.. Tapos binalik ko ulit sa bm622m na firware kasi hindi ko po alam kung pano maglagay ng mac dun kahit ung live ayaw eh...
Ngaun ang problema ko pag magsalang ako ng CDC na mac ang nangyayari ay connected tapos magdidisconnect tapos wala na...
Diba dapat magCONNECT THEN DISCONNECT THEN CONNECT?? Magaagawan kasi dapat un eh...
Pero ngaun waley.. Bwiset haha!! Hindi tuloy ako mkapag snipe ng maayus,, kailangan q pang magrestart ng wimax
Para malaman ko kung stable ung mac or hindi... Kaasar.. Hindi kaya sa firmware ang problema??
Baka meron kayo jan original BM622M FIRMWARE V16 or V17 kahit anu jan... V16 kc ung sa akin eh...

sana may nkatulong maraming salamt po mga idol...

 

[strikerj02]

Mga sir ung bm622m 2012 q po ay ginawa ko dating green packet.. Ngdownload aq ng firmware ng (G. Packet) tinest ko lang kng anu magiging itsura.. Tapos binalik ko ulit sa bm622m na firware kasi hindi ko po alam kung pano maglagay ng mac dun kahit ung live ayaw eh...
Ngaun ang problema ko pag magsalang ako ng CDC na mac ang nangyayari ay connected tapos magdidisconnect tapos wala na...
Diba dapat magCONNECT THEN DISCONNECT THEN CONNECT?? Magaagawan kasi dapat un eh...
Pero ngaun waley.. Bwiset haha!! Hindi tuloy ako mkapag snipe ng maayus,, kailangan q pang magrestart ng wimax
Para malaman ko kung stable ung mac or hindi... Kaasar.. Hindi kaya sa firmware ang problema??
Baka meron kayo jan original BM622M FIRMWARE V16 or V17 kahit anu jan... V16 kc ung sa akin eh...

sana may nkatulong maraming salamt po mga idol...

trade tau ng mac,.,

 

[rico4103]

gamit ka po ng winspreader v0.7 tapos firmware ng bm622m. search mo nalang po sa google.

 

[kharton]

gamit ka po ng winspreader v0.7 tapos firmware ng bm622m. search mo nalang po sa google.

Sir gnun prin eh... Hal. Naglagay aq ng mac connected sya tapos ma didisconnect tapos nd na magcoconnect kailangan pang irestart bago mag connect ulit.. Kahit anong default q ganun prin eh... Panu ba to??


Tulong sa may alam jan

 

[rico4103]

Sir gnun prin eh... Hal. Naglagay aq ng mac connected sya tapos ma didisconnect tapos nd na magcoconnect kailangan pang irestart bago mag connect ulit.. Kahit anong default q ganun prin eh... Panu ba to??


Tulong sa may alam jan

try mo to. palitan mo lang yung mac jan.

Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"color a"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"telnet 192.168.254.1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"Firefly"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"$P4mb1h1r4N4m4nT0!!"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"cd /etc"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"rm default.cfg"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset pw_static_model 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_ETH_PORT_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LEDBUTTON_TIMER_INTERVAL 125"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset VOIP_CH_NUM 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset SLIC_TYPE 321760"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_MAP 0,-1,2,15,24,12,11,25,10,-1,-1,-1,-1,-1,13,14"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset GPIO_INVERSION 32772,0"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_SERVER_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_CLIENT_AUTH MD5"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL_ENABLE 1"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset DM_INTERVAL 3600"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC_ENCRY 346BDXXXXXX"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WAN_MAC 34:6B3:XX:XX:XX"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset LAN_MAC 34:6B3:XX:XX:XY"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg dset WMX_FREQ_LIST 2507500,2602000,2612000,2622000,2638000,2505000,2510000"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"sncfg reload"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"/factoryreset.sh"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

 

[kharton]

try mo to. palitan mo lang yung mac jan.

Ok to sir hehe mukang ito ung complete restore default hehe... Salamat po dto sir... Sana mag ok na..

 

[djvlad]

naayos na ba ni boss Rico paps?

 

[kharton]

Ayus na ayus... Eheheh sarap na magsnipe nito.. Maraming salamat sir rico astig... Hehehe
Baka pde humirit ng mac jan eheheheheh sabay ganun eh no... Hehe

 

[djvlad]

haha nice haha