FOR 2013 firmware version users, READ THIS:
Latest update below best for version 2013 firmware (lalo na yung sniper ng registered version). WHY? Kasi hindi nyo na kailangan ineable ang SSH everytime magtetest kayo kung working ang MAC sa 2013 version modem nyo. Try lang kayo ng try ng mac until connected. Sa next change MAC nyo na lang uli ireenable ang SSH. Sa sniper naman, wala na irere-enable na SSH pero makakasnipe kayo without restrictions.
Pwede sa version 2013 Firmware but downgrading to 2012 recommended for ease of use.
You must have a properly working Internet Explorer (IE) browser installed.
Nag-eevolve po ang program natin kaya basa-basa na lang po sa thread kung gusto nyo malaman konting history nito or makita ang link ng old downloadables. Yung latest version na lang po kasi ang itinitira ko dito sa first post.
Update (2014-01-26 0220hrs):
-----------------------------
- Auto-read current settings (no need no click button).
-
Pwede sa 2013 firmware pero dapat manually ienable ang SSH before and after changing mac (para gumana ang "automatic read settings").
- Auto repair LAN connection (only if needed). [Repair LAN] button removed
- ONE-CLICK mac change. (Pwede din isabay ang Scan Frequency at Domain)
- Enable SSH included in [Enable Telnet] button.
Sabay na din ang WAN at HTTPS disabling para protection against remoting. Note: This button does not function for 2013 firmware.
- [Create admin] button removed. Original admin password used when logging-in admin
Update (2014-02-03 1649hrs): ver 2.06.01
-----------------------------------------
-No need to click [Protect & Enable Telnet/SSH] button every change mac (just set it once).
-No need to click [Create admin] button every change mac (just set it once).
How to downgrade to 2012? Visit this this thread:
http://www.symbianize.com/showthread.php?t=1106757
Or ayaw nyo pa rin umalis sa 2013 at gusto nyo magtyaga sa pagenable ng SSH every mac changing? Get info from here:
http://www.symbianize.com/showthread.php?t=1107344
Hindi po exactly yan ang purpose ng tut nila pero pwede din yung method para magawa ang purpose.
version 2.02.05 Shareware only (HINDI PO GUMAGANA ANG MAC SCANNER AT MAC SNIPER/TESTER TABS)
Ito itsura nya initially pag ni-run nyo:
http://www.4shared.com/download/eTbIvvAuba/Screenshot_1.png
Pag may problema sa LAN connection: ............ Pag nakadisable ang LAN SSH:
http://www.4shared.com/download/4aFuJ22Nba/Screenshot_2_3.png
Click [Yes] when modem light is stable..............................Click [Yes]. But if ver. 2013, manually enable SSH.
Kung ok naman, just type-in or paste MAC (pwede pang 22m, pwede pang tabo) and click [Set]:
http://www.4shared.com/download/F0zqSWfkba/Screenshot_4.png
Magkasunod na lalabas mga ito:
http://www.4shared.com/download/3j-PBj8vce/Screenshot_5_6.PNG
Uulit katulad ng sa simula at malamang at this point, connected ka na kung live ang MAC na inilagay mo.
These are the other buttons:
http://www.4shared.com/download/mbnuhT2qba/Screenshot_7.png
-----------------------------------------------------------------------------------------------------------------------
LATEST UPDATE!!!
Update (2014-02-02 0034hrs):
-NO MORE MODEM REBOOTING during change mac! (which now takes only around 20 to 30 secs including connection)
-create admin/admin account returned. para simple ang login ng admin.
Version 2.05.01
http://www.4shared.com/download/wqkAtUrJba/Screenshot_10__1_.png
The big difference now is: Pag click nyo ng [Set] hindi na magrereboot ang modem. Diretso connect na sa internet, so mga 20 to 30 secs lang depende sa ganda ng signal (mas maganda kung fixed lang sa isa ang frequency).
This means, kung hindi kumonek ang mac na inilagay nyo, palitan lang ang mac then click [Set] again (hindi na magrereboot ang modem) hanggang makahanap ka ng mac na connected. Para ka narin nagssnipe and actually, mas mabilis pa kesa sniper ng iba dahil "no rebooting" to. Manual mo nga lang tinatype yung mac.
*Note: automatic sniper is actually available in registered version.
Pag inopen nyo ang GUI sa browser, mapapansin nyo hindi napalitan ang mac na nakasulat pero SA LOOB NG MODEM AY PERMANENTLY NAPALITAN NA ANG MAC. Try nyo ireboot at magreregister na sa GUI ang last mac used.
Para maprove nyo: magprepare kayo ng 2 macs. 1 connected and 1 disconnected. Iset nyo muna sa disconnected then reboot the modem. Makikita nyo sa GUI iyong disconnected mac ang nakaregister. then use the tool and set the connected mac without rebooting. Wait and observe the modem will connect. Reboot and see the connected mac is permanent.
-------------------------------------------
Para nga pala sa mga nakakuha ng free registered version, some info about sniping page (a.k.a.
"SOS (Sniper on Steroids)":
http://www.4shared.com/download/Yv8X7Rv9ba/Screenshot_11__1_.png
Habang nagssnipe may "Press [ESC] to abort..." lilitaw sa ilalim in cse masyado malaki range nilagay nyo at naiinip na kayo. Masasave pa rin ang partial sniped macs. Just view the last sniping results by clicking [Last Result] button.
-------------------------------------------
Update:
- as requested by testers - Ending MAC is removed
- Snipe by MAC List now working
http://www.4shared.com/download/AcwCJECNba/Screenshot_12.png
For all --> Download Shareware Version 2.02.05.02
Pwede po ang New at Old MAC Series dito.
* For 64-bit OS and Windows 7 or higher OS, set to run in Windows XP Compatibility Mode and Run as Administrator
For registered users/*beta-testers only --> Download Registered Version 2.04.04 (dating password)
* beta-tester positions are full right now so don't PM for password, please.
